MYNT-EYE-S-SDK/3rdparty/ceres-solver-1.11.0/cmake/FindSuiteSparse.cmake

652 lines
26 KiB
CMake
Raw Normal View History

2019-01-03 10:25:18 +02:00
# Ceres Solver - A fast non-linear least squares minimizer
# Copyright 2015 Google Inc. All rights reserved.
# http://ceres-solver.org/
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# * Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
# * Neither the name of Google Inc. nor the names of its contributors may be
# used to endorse or promote products derived from this software without
# specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# Author: alexs.mac@gmail.com (Alex Stewart)
#
# FindSuiteSparse.cmake - Find SuiteSparse libraries & dependencies.
#
# This module defines the following variables:
#
# SUITESPARSE_FOUND: TRUE iff SuiteSparse and all dependencies have been found.
# SUITESPARSE_INCLUDE_DIRS: Include directories for all SuiteSparse components.
# SUITESPARSE_LIBRARIES: Libraries for all SuiteSparse component libraries and
# dependencies.
# SUITESPARSE_VERSION: Extracted from UFconfig.h (<= v3) or
# SuiteSparse_config.h (>= v4).
# SUITESPARSE_MAIN_VERSION: Equal to 4 if SUITESPARSE_VERSION = 4.2.1
# SUITESPARSE_SUB_VERSION: Equal to 2 if SUITESPARSE_VERSION = 4.2.1
# SUITESPARSE_SUBSUB_VERSION: Equal to 1 if SUITESPARSE_VERSION = 4.2.1
#
# SUITESPARSE_IS_BROKEN_SHARED_LINKING_UBUNTU_SYSTEM_VERSION: TRUE iff running
# on Ubuntu, SUITESPARSE_VERSION is 3.4.0 and found SuiteSparse is a system
# install, in which case found version of SuiteSparse cannot be used to link
# a shared library due to a bug (static linking is unaffected).
#
# The following variables control the behaviour of this module:
#
# SUITESPARSE_INCLUDE_DIR_HINTS: List of additional directories in which to
# search for SuiteSparse includes,
# e.g: /timbuktu/include.
# SUITESPARSE_LIBRARY_DIR_HINTS: List of additional directories in which to
# search for SuiteSparse libraries,
# e.g: /timbuktu/lib.
#
# The following variables define the presence / includes & libraries for the
# SuiteSparse components searched for, the SUITESPARSE_XX variables are the
# union of the variables for all components.
#
# == Symmetric Approximate Minimum Degree (AMD)
# AMD_FOUND
# AMD_INCLUDE_DIR
# AMD_LIBRARY
#
# == Constrained Approximate Minimum Degree (CAMD)
# CAMD_FOUND
# CAMD_INCLUDE_DIR
# CAMD_LIBRARY
#
# == Column Approximate Minimum Degree (COLAMD)
# COLAMD_FOUND
# COLAMD_INCLUDE_DIR
# COLAMD_LIBRARY
#
# Constrained Column Approximate Minimum Degree (CCOLAMD)
# CCOLAMD_FOUND
# CCOLAMD_INCLUDE_DIR
# CCOLAMD_LIBRARY
#
# == Sparse Supernodal Cholesky Factorization and Update/Downdate (CHOLMOD)
# CHOLMOD_FOUND
# CHOLMOD_INCLUDE_DIR
# CHOLMOD_LIBRARY
#
# == Multifrontal Sparse QR (SuiteSparseQR)
# SUITESPARSEQR_FOUND
# SUITESPARSEQR_INCLUDE_DIR
# SUITESPARSEQR_LIBRARY
#
# == Common configuration for all but CSparse (SuiteSparse version >= 4).
# SUITESPARSE_CONFIG_FOUND
# SUITESPARSE_CONFIG_INCLUDE_DIR
# SUITESPARSE_CONFIG_LIBRARY
#
# == Common configuration for all but CSparse (SuiteSparse version < 4).
# UFCONFIG_FOUND
# UFCONFIG_INCLUDE_DIR
#
# Optional SuiteSparse Dependencies:
#
# == Serial Graph Partitioning and Fill-reducing Matrix Ordering (METIS)
# METIS_FOUND
# METIS_LIBRARY
#
# == Intel Thread Building Blocks (TBB)
# TBB_FOUND
# TBB_LIBRARIES
# Reset CALLERS_CMAKE_FIND_LIBRARY_PREFIXES to its value when
# FindSuiteSparse was invoked.
macro(SUITESPARSE_RESET_FIND_LIBRARY_PREFIX)
if (MSVC)
set(CMAKE_FIND_LIBRARY_PREFIXES "${CALLERS_CMAKE_FIND_LIBRARY_PREFIXES}")
endif (MSVC)
endmacro(SUITESPARSE_RESET_FIND_LIBRARY_PREFIX)
# Called if we failed to find SuiteSparse or any of it's required dependencies,
# unsets all public (designed to be used externally) variables and reports
# error message at priority depending upon [REQUIRED/QUIET/<NONE>] argument.
macro(SUITESPARSE_REPORT_NOT_FOUND REASON_MSG)
unset(SUITESPARSE_FOUND)
unset(SUITESPARSE_INCLUDE_DIRS)
unset(SUITESPARSE_LIBRARIES)
unset(SUITESPARSE_VERSION)
unset(SUITESPARSE_MAIN_VERSION)
unset(SUITESPARSE_SUB_VERSION)
unset(SUITESPARSE_SUBSUB_VERSION)
# Do NOT unset SUITESPARSE_FOUND_REQUIRED_VARS here, as it is used by
# FindPackageHandleStandardArgs() to generate the automatic error message on
# failure which highlights which components are missing.
suitesparse_reset_find_library_prefix()
# Note <package>_FIND_[REQUIRED/QUIETLY] variables defined by FindPackage()
# use the camelcase library name, not uppercase.
if (SuiteSparse_FIND_QUIETLY)
message(STATUS "Failed to find SuiteSparse - " ${REASON_MSG} ${ARGN})
elseif (SuiteSparse_FIND_REQUIRED)
message(FATAL_ERROR "Failed to find SuiteSparse - " ${REASON_MSG} ${ARGN})
else()
# Neither QUIETLY nor REQUIRED, use no priority which emits a message
# but continues configuration and allows generation.
message("-- Failed to find SuiteSparse - " ${REASON_MSG} ${ARGN})
endif (SuiteSparse_FIND_QUIETLY)
# Do not call RETURN(), s/t we keep processing if not called with REQUIRED.
endmacro(SUITESPARSE_REPORT_NOT_FOUND)
# Handle possible presence of lib prefix for libraries on MSVC, see
# also SUITESPARSE_RESET_FIND_LIBRARY_PREFIX().
if (MSVC)
# Preserve the caller's original values for CMAKE_FIND_LIBRARY_PREFIXES
# s/t we can set it back before returning.
set(CALLERS_CMAKE_FIND_LIBRARY_PREFIXES "${CMAKE_FIND_LIBRARY_PREFIXES}")
# The empty string in this list is important, it represents the case when
# the libraries have no prefix (shared libraries / DLLs).
set(CMAKE_FIND_LIBRARY_PREFIXES "lib" "" "${CMAKE_FIND_LIBRARY_PREFIXES}")
endif (MSVC)
# Specify search directories for include files and libraries (this is the union
# of the search directories for all OSs). Search user-specified hint
# directories first if supplied, and search user-installed locations first
# so that we prefer user installs to system installs where both exist.
list(APPEND SUITESPARSE_CHECK_INCLUDE_DIRS
${SUITESPARSE_INCLUDE_DIR_HINTS}
/opt/local/include
/opt/local/include/ufsparse # Mac OS X
/usr/local/homebrew/include # Mac OS X
/usr/local/include
/usr/local/include/suitesparse
/usr/include/suitesparse # Ubuntu
/usr/include)
list(APPEND SUITESPARSE_CHECK_LIBRARY_DIRS
${SUITESPARSE_LIBRARY_DIR_HINTS}
/opt/local/lib
/opt/local/lib/ufsparse # Mac OS X
/usr/local/homebrew/lib # Mac OS X
/usr/local/lib
/usr/local/lib/suitesparse
/usr/lib/suitesparse # Ubuntu
/usr/lib)
# Given the number of components of SuiteSparse, and to ensure that the
# automatic failure message generated by FindPackageHandleStandardArgs()
# when not all required components are found is helpful, we maintain a list
# of all variables that must be defined for SuiteSparse to be considered found.
unset(SUITESPARSE_FOUND_REQUIRED_VARS)
# BLAS.
find_package(BLAS QUIET)
if (NOT BLAS_FOUND)
suitesparse_report_not_found(
"Did not find BLAS library (required for SuiteSparse).")
endif (NOT BLAS_FOUND)
list(APPEND SUITESPARSE_FOUND_REQUIRED_VARS BLAS_FOUND)
# LAPACK.
find_package(LAPACK QUIET)
if (NOT LAPACK_FOUND)
suitesparse_report_not_found(
"Did not find LAPACK library (required for SuiteSparse).")
endif (NOT LAPACK_FOUND)
list(APPEND SUITESPARSE_FOUND_REQUIRED_VARS LAPACK_FOUND)
# AMD.
set(AMD_FOUND TRUE)
list(APPEND SUITESPARSE_FOUND_REQUIRED_VARS AMD_FOUND)
find_library(AMD_LIBRARY NAMES amd
PATHS ${SUITESPARSE_CHECK_LIBRARY_DIRS})
if (EXISTS ${AMD_LIBRARY})
message(STATUS "Found AMD library: ${AMD_LIBRARY}")
else (EXISTS ${AMD_LIBRARY})
suitesparse_report_not_found(
"Did not find AMD library (required SuiteSparse component).")
set(AMD_FOUND FALSE)
endif (EXISTS ${AMD_LIBRARY})
mark_as_advanced(AMD_LIBRARY)
find_path(AMD_INCLUDE_DIR NAMES amd.h
PATHS ${SUITESPARSE_CHECK_INCLUDE_DIRS})
if (EXISTS ${AMD_INCLUDE_DIR})
message(STATUS "Found AMD header in: ${AMD_INCLUDE_DIR}")
else (EXISTS ${AMD_INCLUDE_DIR})
suitesparse_report_not_found(
"Did not find AMD header (required SuiteSparse component).")
set(AMD_FOUND FALSE)
endif (EXISTS ${AMD_INCLUDE_DIR})
mark_as_advanced(AMD_INCLUDE_DIR)
# CAMD.
set(CAMD_FOUND TRUE)
list(APPEND SUITESPARSE_FOUND_REQUIRED_VARS CAMD_FOUND)
find_library(CAMD_LIBRARY NAMES camd
PATHS ${SUITESPARSE_CHECK_LIBRARY_DIRS})
if (EXISTS ${CAMD_LIBRARY})
message(STATUS "Found CAMD library: ${CAMD_LIBRARY}")
else (EXISTS ${CAMD_LIBRARY})
suitesparse_report_not_found(
"Did not find CAMD library (required SuiteSparse component).")
set(CAMD_FOUND FALSE)
endif (EXISTS ${CAMD_LIBRARY})
mark_as_advanced(CAMD_LIBRARY)
find_path(CAMD_INCLUDE_DIR NAMES camd.h
PATHS ${SUITESPARSE_CHECK_INCLUDE_DIRS})
if (EXISTS ${CAMD_INCLUDE_DIR})
message(STATUS "Found CAMD header in: ${CAMD_INCLUDE_DIR}")
else (EXISTS ${CAMD_INCLUDE_DIR})
suitesparse_report_not_found(
"Did not find CAMD header (required SuiteSparse component).")
set(CAMD_FOUND FALSE)
endif (EXISTS ${CAMD_INCLUDE_DIR})
mark_as_advanced(CAMD_INCLUDE_DIR)
# COLAMD.
set(COLAMD_FOUND TRUE)
list(APPEND SUITESPARSE_FOUND_REQUIRED_VARS COLAMD_FOUND)
find_library(COLAMD_LIBRARY NAMES colamd
PATHS ${SUITESPARSE_CHECK_LIBRARY_DIRS})
if (EXISTS ${COLAMD_LIBRARY})
message(STATUS "Found COLAMD library: ${COLAMD_LIBRARY}")
else (EXISTS ${COLAMD_LIBRARY})
suitesparse_report_not_found(
"Did not find COLAMD library (required SuiteSparse component).")
set(COLAMD_FOUND FALSE)
endif (EXISTS ${COLAMD_LIBRARY})
mark_as_advanced(COLAMD_LIBRARY)
find_path(COLAMD_INCLUDE_DIR NAMES colamd.h
PATHS ${SUITESPARSE_CHECK_INCLUDE_DIRS})
if (EXISTS ${COLAMD_INCLUDE_DIR})
message(STATUS "Found COLAMD header in: ${COLAMD_INCLUDE_DIR}")
else (EXISTS ${COLAMD_INCLUDE_DIR})
suitesparse_report_not_found(
"Did not find COLAMD header (required SuiteSparse component).")
set(COLAMD_FOUND FALSE)
endif (EXISTS ${COLAMD_INCLUDE_DIR})
mark_as_advanced(COLAMD_INCLUDE_DIR)
# CCOLAMD.
set(CCOLAMD_FOUND TRUE)
list(APPEND SUITESPARSE_FOUND_REQUIRED_VARS CCOLAMD_FOUND)
find_library(CCOLAMD_LIBRARY NAMES ccolamd
PATHS ${SUITESPARSE_CHECK_LIBRARY_DIRS})
if (EXISTS ${CCOLAMD_LIBRARY})
message(STATUS "Found CCOLAMD library: ${CCOLAMD_LIBRARY}")
else (EXISTS ${CCOLAMD_LIBRARY})
suitesparse_report_not_found(
"Did not find CCOLAMD library (required SuiteSparse component).")
set(CCOLAMD_FOUND FALSE)
endif (EXISTS ${CCOLAMD_LIBRARY})
mark_as_advanced(CCOLAMD_LIBRARY)
find_path(CCOLAMD_INCLUDE_DIR NAMES ccolamd.h
PATHS ${SUITESPARSE_CHECK_INCLUDE_DIRS})
if (EXISTS ${CCOLAMD_INCLUDE_DIR})
message(STATUS "Found CCOLAMD header in: ${CCOLAMD_INCLUDE_DIR}")
else (EXISTS ${CCOLAMD_INCLUDE_DIR})
suitesparse_report_not_found(
"Did not find CCOLAMD header (required SuiteSparse component).")
set(CCOLAMD_FOUND FALSE)
endif (EXISTS ${CCOLAMD_INCLUDE_DIR})
mark_as_advanced(CCOLAMD_INCLUDE_DIR)
# CHOLMOD.
set(CHOLMOD_FOUND TRUE)
list(APPEND SUITESPARSE_FOUND_REQUIRED_VARS CHOLMOD_FOUND)
find_library(CHOLMOD_LIBRARY NAMES cholmod
PATHS ${SUITESPARSE_CHECK_LIBRARY_DIRS})
if (EXISTS ${CHOLMOD_LIBRARY})
message(STATUS "Found CHOLMOD library: ${CHOLMOD_LIBRARY}")
else (EXISTS ${CHOLMOD_LIBRARY})
suitesparse_report_not_found(
"Did not find CHOLMOD library (required SuiteSparse component).")
set(CHOLMOD_FOUND FALSE)
endif (EXISTS ${CHOLMOD_LIBRARY})
mark_as_advanced(CHOLMOD_LIBRARY)
find_path(CHOLMOD_INCLUDE_DIR NAMES cholmod.h
PATHS ${SUITESPARSE_CHECK_INCLUDE_DIRS})
if (EXISTS ${CHOLMOD_INCLUDE_DIR})
message(STATUS "Found CHOLMOD header in: ${CHOLMOD_INCLUDE_DIR}")
else (EXISTS ${CHOLMOD_INCLUDE_DIR})
suitesparse_report_not_found(
"Did not find CHOLMOD header (required SuiteSparse component).")
set(CHOLMOD_FOUND FALSE)
endif (EXISTS ${CHOLMOD_INCLUDE_DIR})
mark_as_advanced(CHOLMOD_INCLUDE_DIR)
# SuiteSparseQR.
set(SUITESPARSEQR_FOUND TRUE)
list(APPEND SUITESPARSE_FOUND_REQUIRED_VARS SUITESPARSEQR_FOUND)
find_library(SUITESPARSEQR_LIBRARY NAMES spqr
PATHS ${SUITESPARSE_CHECK_LIBRARY_DIRS})
if (EXISTS ${SUITESPARSEQR_LIBRARY})
message(STATUS "Found SuiteSparseQR library: ${SUITESPARSEQR_LIBRARY}")
else (EXISTS ${SUITESPARSEQR_LIBRARY})
suitesparse_report_not_found(
"Did not find SuiteSparseQR library (required SuiteSparse component).")
set(SUITESPARSEQR_FOUND FALSE)
endif (EXISTS ${SUITESPARSEQR_LIBRARY})
mark_as_advanced(SUITESPARSEQR_LIBRARY)
find_path(SUITESPARSEQR_INCLUDE_DIR NAMES SuiteSparseQR.hpp
PATHS ${SUITESPARSE_CHECK_INCLUDE_DIRS})
if (EXISTS ${SUITESPARSEQR_INCLUDE_DIR})
message(STATUS "Found SuiteSparseQR header in: ${SUITESPARSEQR_INCLUDE_DIR}")
else (EXISTS ${SUITESPARSEQR_INCLUDE_DIR})
suitesparse_report_not_found(
"Did not find SUITESPARSEQR header (required SuiteSparse component).")
set(SUITESPARSEQR_FOUND FALSE)
endif (EXISTS ${SUITESPARSEQR_INCLUDE_DIR})
mark_as_advanced(SUITESPARSEQR_INCLUDE_DIR)
if (SUITESPARSEQR_FOUND)
# SuiteSparseQR may be compiled with Intel Threading Building Blocks,
# we assume that if TBB is installed, SuiteSparseQR was compiled with
# support for it, this will do no harm if it wasn't.
set(TBB_FOUND TRUE)
find_library(TBB_LIBRARIES NAMES tbb
PATHS ${SUITESPARSE_CHECK_LIBRARY_DIRS})
if (EXISTS ${TBB_LIBRARIES})
message(STATUS "Found Intel Thread Building Blocks (TBB) library: "
"${TBB_LIBRARIES}, assuming SuiteSparseQR was compiled with TBB.")
else (EXISTS ${TBB_LIBRARIES})
message(STATUS "Did not find Intel TBB library, assuming SuiteSparseQR was "
"not compiled with TBB.")
set(TBB_FOUND FALSE)
endif (EXISTS ${TBB_LIBRARIES})
mark_as_advanced(TBB_LIBRARIES)
if (TBB_FOUND)
find_library(TBB_MALLOC_LIB NAMES tbbmalloc
PATHS ${SUITESPARSE_CHECK_LIBRARY_DIRS})
if (EXISTS ${TBB_MALLOC_LIB})
message(STATUS "Found Intel Thread Building Blocks (TBB) Malloc library: "
"${TBB_MALLOC_LIB}")
# Append TBB malloc library to TBB libraries list whilst retaining
# any CMake generated help string (cache variable).
list(APPEND TBB_LIBRARIES ${TBB_MALLOC_LIB})
get_property(HELP_STRING CACHE TBB_LIBRARIES PROPERTY HELPSTRING)
set(TBB_LIBRARIES "${TBB_LIBRARIES}" CACHE STRING "${HELP_STRING}")
# Add the TBB libraries to the SuiteSparseQR libraries (the only
# libraries to optionally depend on TBB).
list(APPEND SUITESPARSEQR_LIBRARY ${TBB_LIBRARIES})
else (EXISTS ${TBB_MALLOC_LIB})
# If we cannot find all required TBB components do not include it as
# a dependency.
message(STATUS "Did not find Intel Thread Building Blocks (TBB) Malloc "
"Library, discarding TBB as a dependency.")
set(TBB_FOUND FALSE)
endif (EXISTS ${TBB_MALLOC_LIB})
mark_as_advanced(TBB_MALLOC_LIB)
endif (TBB_FOUND)
endif(SUITESPARSEQR_FOUND)
# UFconfig / SuiteSparse_config.
#
# If SuiteSparse version is >= 4 then SuiteSparse_config is required.
# For SuiteSparse 3, UFconfig.h is required.
find_library(SUITESPARSE_CONFIG_LIBRARY NAMES suitesparseconfig
PATHS ${SUITESPARSE_CHECK_LIBRARY_DIRS})
if (EXISTS ${SUITESPARSE_CONFIG_LIBRARY})
message(STATUS "Found SuiteSparse_config library: "
"${SUITESPARSE_CONFIG_LIBRARY}")
endif (EXISTS ${SUITESPARSE_CONFIG_LIBRARY})
mark_as_advanced(SUITESPARSE_CONFIG_LIBRARY)
find_path(SUITESPARSE_CONFIG_INCLUDE_DIR NAMES SuiteSparse_config.h
PATHS ${SUITESPARSE_CHECK_INCLUDE_DIRS})
if (EXISTS ${SUITESPARSE_CONFIG_INCLUDE_DIR})
message(STATUS "Found SuiteSparse_config header in: "
"${SUITESPARSE_CONFIG_INCLUDE_DIR}")
endif (EXISTS ${SUITESPARSE_CONFIG_INCLUDE_DIR})
mark_as_advanced(SUITESPARSE_CONFIG_INCLUDE_DIR)
set(SUITESPARSE_CONFIG_FOUND FALSE)
set(UFCONFIG_FOUND FALSE)
if (EXISTS ${SUITESPARSE_CONFIG_LIBRARY} AND
EXISTS ${SUITESPARSE_CONFIG_INCLUDE_DIR})
set(SUITESPARSE_CONFIG_FOUND TRUE)
# SuiteSparse_config (SuiteSparse version >= 4) requires librt library for
# timing by default when compiled on Linux or Unix, but not on OSX (which
# does not have librt).
if (CMAKE_SYSTEM_NAME MATCHES "Linux" OR UNIX AND NOT APPLE)
find_library(LIBRT_LIBRARY NAMES rt
PATHS ${SUITESPARSE_CHECK_LIBRARY_DIRS})
if (LIBRT_LIBRARY)
message(STATUS "Adding librt: ${LIBRT_LIBRARY} to "
"SuiteSparse_config libraries (required on Linux & Unix [not OSX] if "
"SuiteSparse is compiled with timing).")
else (LIBRT_LIBRARY)
message(STATUS "Could not find librt, but found SuiteSparse_config, "
"assuming that SuiteSparse was compiled without timing.")
endif (LIBRT_LIBRARY)
mark_as_advanced(LIBRT_LIBRARY)
list(APPEND SUITESPARSE_CONFIG_LIBRARY ${LIBRT_LIBRARY})
endif (CMAKE_SYSTEM_NAME MATCHES "Linux" OR UNIX AND NOT APPLE)
else (EXISTS ${SUITESPARSE_CONFIG_LIBRARY} AND
EXISTS ${SUITESPARSE_CONFIG_INCLUDE_DIR})
# Failed to find SuiteSparse_config (>= v4 installs), instead look for
# UFconfig header which should be present in < v4 installs.
set(SUITESPARSE_CONFIG_FOUND FALSE)
find_path(UFCONFIG_INCLUDE_DIR NAMES UFconfig.h
PATHS ${SUITESPARSE_CHECK_INCLUDE_DIRS})
if (EXISTS ${UFCONFIG_INCLUDE_DIR})
message(STATUS "Found UFconfig header in: ${UFCONFIG_INCLUDE_DIR}")
set(UFCONFIG_FOUND TRUE)
endif (EXISTS ${UFCONFIG_INCLUDE_DIR})
mark_as_advanced(UFCONFIG_INCLUDE_DIR)
endif (EXISTS ${SUITESPARSE_CONFIG_LIBRARY} AND
EXISTS ${SUITESPARSE_CONFIG_INCLUDE_DIR})
if (NOT SUITESPARSE_CONFIG_FOUND AND
NOT UFCONFIG_FOUND)
suitesparse_report_not_found(
"Failed to find either: SuiteSparse_config header & library (should be "
"present in all SuiteSparse >= v4 installs), or UFconfig header (should "
"be present in all SuiteSparse < v4 installs).")
endif (NOT SUITESPARSE_CONFIG_FOUND AND
NOT UFCONFIG_FOUND)
# Extract the SuiteSparse version from the appropriate header (UFconfig.h for
# <= v3, SuiteSparse_config.h for >= v4).
list(APPEND SUITESPARSE_FOUND_REQUIRED_VARS SUITESPARSE_VERSION)
if (UFCONFIG_FOUND)
# SuiteSparse version <= 3.
set(SUITESPARSE_VERSION_FILE ${UFCONFIG_INCLUDE_DIR}/UFconfig.h)
if (NOT EXISTS ${SUITESPARSE_VERSION_FILE})
suitesparse_report_not_found(
"Could not find file: ${SUITESPARSE_VERSION_FILE} containing version "
"information for <= v3 SuiteSparse installs, but UFconfig was found "
"(only present in <= v3 installs).")
else (NOT EXISTS ${SUITESPARSE_VERSION_FILE})
file(READ ${SUITESPARSE_VERSION_FILE} UFCONFIG_CONTENTS)
string(REGEX MATCH "#define SUITESPARSE_MAIN_VERSION [0-9]+"
SUITESPARSE_MAIN_VERSION "${UFCONFIG_CONTENTS}")
string(REGEX REPLACE "#define SUITESPARSE_MAIN_VERSION ([0-9]+)" "\\1"
SUITESPARSE_MAIN_VERSION "${SUITESPARSE_MAIN_VERSION}")
string(REGEX MATCH "#define SUITESPARSE_SUB_VERSION [0-9]+"
SUITESPARSE_SUB_VERSION "${UFCONFIG_CONTENTS}")
string(REGEX REPLACE "#define SUITESPARSE_SUB_VERSION ([0-9]+)" "\\1"
SUITESPARSE_SUB_VERSION "${SUITESPARSE_SUB_VERSION}")
string(REGEX MATCH "#define SUITESPARSE_SUBSUB_VERSION [0-9]+"
SUITESPARSE_SUBSUB_VERSION "${UFCONFIG_CONTENTS}")
string(REGEX REPLACE "#define SUITESPARSE_SUBSUB_VERSION ([0-9]+)" "\\1"
SUITESPARSE_SUBSUB_VERSION "${SUITESPARSE_SUBSUB_VERSION}")
# This is on a single line s/t CMake does not interpret it as a list of
# elements and insert ';' separators which would result in 4.;2.;1 nonsense.
set(SUITESPARSE_VERSION
"${SUITESPARSE_MAIN_VERSION}.${SUITESPARSE_SUB_VERSION}.${SUITESPARSE_SUBSUB_VERSION}")
endif (NOT EXISTS ${SUITESPARSE_VERSION_FILE})
endif (UFCONFIG_FOUND)
if (SUITESPARSE_CONFIG_FOUND)
# SuiteSparse version >= 4.
set(SUITESPARSE_VERSION_FILE
${SUITESPARSE_CONFIG_INCLUDE_DIR}/SuiteSparse_config.h)
if (NOT EXISTS ${SUITESPARSE_VERSION_FILE})
suitesparse_report_not_found(
"Could not find file: ${SUITESPARSE_VERSION_FILE} containing version "
"information for >= v4 SuiteSparse installs, but SuiteSparse_config was "
"found (only present in >= v4 installs).")
else (NOT EXISTS ${SUITESPARSE_VERSION_FILE})
file(READ ${SUITESPARSE_VERSION_FILE} SUITESPARSE_CONFIG_CONTENTS)
string(REGEX MATCH "#define SUITESPARSE_MAIN_VERSION [0-9]+"
SUITESPARSE_MAIN_VERSION "${SUITESPARSE_CONFIG_CONTENTS}")
string(REGEX REPLACE "#define SUITESPARSE_MAIN_VERSION ([0-9]+)" "\\1"
SUITESPARSE_MAIN_VERSION "${SUITESPARSE_MAIN_VERSION}")
string(REGEX MATCH "#define SUITESPARSE_SUB_VERSION [0-9]+"
SUITESPARSE_SUB_VERSION "${SUITESPARSE_CONFIG_CONTENTS}")
string(REGEX REPLACE "#define SUITESPARSE_SUB_VERSION ([0-9]+)" "\\1"
SUITESPARSE_SUB_VERSION "${SUITESPARSE_SUB_VERSION}")
string(REGEX MATCH "#define SUITESPARSE_SUBSUB_VERSION [0-9]+"
SUITESPARSE_SUBSUB_VERSION "${SUITESPARSE_CONFIG_CONTENTS}")
string(REGEX REPLACE "#define SUITESPARSE_SUBSUB_VERSION ([0-9]+)" "\\1"
SUITESPARSE_SUBSUB_VERSION "${SUITESPARSE_SUBSUB_VERSION}")
# This is on a single line s/t CMake does not interpret it as a list of
# elements and insert ';' separators which would result in 4.;2.;1 nonsense.
set(SUITESPARSE_VERSION
"${SUITESPARSE_MAIN_VERSION}.${SUITESPARSE_SUB_VERSION}.${SUITESPARSE_SUBSUB_VERSION}")
endif (NOT EXISTS ${SUITESPARSE_VERSION_FILE})
endif (SUITESPARSE_CONFIG_FOUND)
# METIS (Optional dependency).
find_library(METIS_LIBRARY NAMES metis
PATHS ${SUITESPARSE_CHECK_LIBRARY_DIRS})
if (EXISTS ${METIS_LIBRARY})
message(STATUS "Found METIS library: ${METIS_LIBRARY}.")
set(METIS_FOUND TRUE)
else (EXISTS ${METIS_LIBRARY})
message(STATUS "Did not find METIS library (optional SuiteSparse dependency)")
set(METIS_FOUND FALSE)
endif (EXISTS ${METIS_LIBRARY})
mark_as_advanced(METIS_LIBRARY)
# Only mark SuiteSparse as found if all required components and dependencies
# have been found.
set(SUITESPARSE_FOUND TRUE)
foreach(REQUIRED_VAR ${SUITESPARSE_FOUND_REQUIRED_VARS})
if (NOT ${REQUIRED_VAR})
set(SUITESPARSE_FOUND FALSE)
endif (NOT ${REQUIRED_VAR})
endforeach(REQUIRED_VAR ${SUITESPARSE_FOUND_REQUIRED_VARS})
if (SUITESPARSE_FOUND)
list(APPEND SUITESPARSE_INCLUDE_DIRS
${AMD_INCLUDE_DIR}
${CAMD_INCLUDE_DIR}
${COLAMD_INCLUDE_DIR}
${CCOLAMD_INCLUDE_DIR}
${CHOLMOD_INCLUDE_DIR}
${SUITESPARSEQR_INCLUDE_DIR})
# Handle config separately, as otherwise at least one of them will be set
# to NOTFOUND which would cause any check on SUITESPARSE_INCLUDE_DIRS to fail.
if (SUITESPARSE_CONFIG_FOUND)
list(APPEND SUITESPARSE_INCLUDE_DIRS
${SUITESPARSE_CONFIG_INCLUDE_DIR})
endif (SUITESPARSE_CONFIG_FOUND)
if (UFCONFIG_FOUND)
list(APPEND SUITESPARSE_INCLUDE_DIRS
${UFCONFIG_INCLUDE_DIR})
endif (UFCONFIG_FOUND)
# As SuiteSparse includes are often all in the same directory, remove any
# repetitions.
list(REMOVE_DUPLICATES SUITESPARSE_INCLUDE_DIRS)
# Important: The ordering of these libraries is *NOT* arbitrary, as these
# could potentially be static libraries their link ordering is important.
list(APPEND SUITESPARSE_LIBRARIES
${SUITESPARSEQR_LIBRARY}
${CHOLMOD_LIBRARY}
${CCOLAMD_LIBRARY}
${CAMD_LIBRARY}
${COLAMD_LIBRARY}
${AMD_LIBRARY}
${LAPACK_LIBRARIES}
${BLAS_LIBRARIES})
if (SUITESPARSE_CONFIG_FOUND)
list(APPEND SUITESPARSE_LIBRARIES
${SUITESPARSE_CONFIG_LIBRARY})
endif (SUITESPARSE_CONFIG_FOUND)
if (METIS_FOUND)
list(APPEND SUITESPARSE_LIBRARIES
${METIS_LIBRARY})
endif (METIS_FOUND)
endif()
# Determine if we are running on Ubuntu with the package install of SuiteSparse
# which is broken and does not support linking a shared library.
set(SUITESPARSE_IS_BROKEN_SHARED_LINKING_UBUNTU_SYSTEM_VERSION FALSE)
if (CMAKE_SYSTEM_NAME MATCHES "Linux" AND
SUITESPARSE_VERSION VERSION_EQUAL 3.4.0)
find_program(LSB_RELEASE_EXECUTABLE lsb_release)
if (LSB_RELEASE_EXECUTABLE)
# Any even moderately recent Ubuntu release (likely to be affected by
# this bug) should have lsb_release, if it isn't present we are likely
# on a different Linux distribution (should be fine).
execute_process(COMMAND ${LSB_RELEASE_EXECUTABLE} -si
OUTPUT_VARIABLE LSB_DISTRIBUTOR_ID
OUTPUT_STRIP_TRAILING_WHITESPACE)
if (LSB_DISTRIBUTOR_ID MATCHES "Ubuntu" AND
SUITESPARSE_LIBRARIES MATCHES "/usr/lib/libamd")
# We are on Ubuntu, and the SuiteSparse version matches the broken
# system install version and is a system install.
set(SUITESPARSE_IS_BROKEN_SHARED_LINKING_UBUNTU_SYSTEM_VERSION TRUE)
message(STATUS "Found system install of SuiteSparse "
"${SUITESPARSE_VERSION} running on Ubuntu, which has a known bug "
"preventing linking of shared libraries (static linking unaffected).")
endif (LSB_DISTRIBUTOR_ID MATCHES "Ubuntu" AND
SUITESPARSE_LIBRARIES MATCHES "/usr/lib/libamd")
endif (LSB_RELEASE_EXECUTABLE)
endif (CMAKE_SYSTEM_NAME MATCHES "Linux" AND
SUITESPARSE_VERSION VERSION_EQUAL 3.4.0)
suitesparse_reset_find_library_prefix()
# Handle REQUIRED and QUIET arguments to FIND_PACKAGE
include(FindPackageHandleStandardArgs)
if (SUITESPARSE_FOUND)
find_package_handle_standard_args(SuiteSparse
REQUIRED_VARS ${SUITESPARSE_FOUND_REQUIRED_VARS}
VERSION_VAR SUITESPARSE_VERSION
FAIL_MESSAGE "Failed to find some/all required components of SuiteSparse.")
else (SUITESPARSE_FOUND)
# Do not pass VERSION_VAR to FindPackageHandleStandardArgs() if we failed to
# find SuiteSparse to avoid a confusing autogenerated failure message
# that states 'not found (missing: FOO) (found version: x.y.z)'.
find_package_handle_standard_args(SuiteSparse
REQUIRED_VARS ${SUITESPARSE_FOUND_REQUIRED_VARS}
FAIL_MESSAGE "Failed to find some/all required components of SuiteSparse.")
endif (SUITESPARSE_FOUND)