at-tami/gerber/gerbmerge/bin/specs.py

178 lines
9.7 KiB
Python
Raw Normal View History

2015-07-23 02:43:01 +03:00
#!/usr/bin/env python
"""
Regular expression, SimpleParse, ane message constants.
Requires:
- SimpleParse 2.1 or higher
http://simpleparse.sourceforge.net
--------------------------------------------------------------------
This program is licensed under the GNU General Public License (GPL)
Version 3. See http://www.fsf.org for details of the license.
Rugged Circuits LLC
http://ruggedcircuits.com/gerbmerge
"""
import re
from simpleparse.parser import Parser
DISCLAIMER = """
****************************************************
* R E A D C A R E F U L L Y *
* *
* This program comes with no warranty. You use *
* this program at your own risk. Do not submit *
* board files for manufacture until you have *
* thoroughly inspected the output of this program *
* using a previewing program such as: *
* *
* Windows: *
* - GC-Prevue <http://www.graphicode.com> *
* - ViewMate <http://www.pentalogix.com> *
* *
* Linux: *
* - gerbv <http://gerbv.sourceforge.net> *
* *
* By using this program you agree to take full *
* responsibility for the correctness of the data *
* that is generated by this program. *
****************************************************
"""[1:-1]
# [Options] section defaults Data types: "L" = layers (will show layer selection)
# "D" = decimal
# "DP" = possitive decimal
# "I" = integer
# "IP" = integer positive
# "PI" = path input (will show open dialog)
# "PO" = path output (will show save dialog)
# "S" = string
# "B" = boolean
# "BI" = boolean as integer
#
# THESE DATA TYPES ARE FIXED - CODE MUST CHANGE IF TYPES ARE ADDED/MODIFIED
DEFAULT_OPTIONS = {
# Spacing in horizontal direction
'xspacing': ('0.125', "DP", "XSpacing", "1 XSPACING_HELP"),
# Spacing in vertical direction
'yspacing': ('0.125', "DP", "YSpacing", "2 YSPACING_HELP"),
# X-Dimension maximum panel size (Olimex)
'panelwidth': ('12.6', "DP", "PanelWidth", "3 PANEL_WIDTH"),
# Y-Dimension maximum panel size (Olimex)
'panelheight': ('7.8', "DP", "PanelHeight", "4 PanelHeight"),
# e.g., *toplayer,*bottomlayer
'cropmarklayers': (None, "L", "CropMarkLayers", "5 CropMarkLayers"),
# Width (inches) of crop lines
'cropmarkwidth': ('0.01', "DP", "CropMarkWidth", "6 CropMarkWidth"),
# as for cropmarklayers
'cutlinelayers': (None, "L", "CutLineLayers", "7 CutLineLayers"),
# Width (inches) of cut lines
'cutlinewidth': ('0.01', "DP", "CutLineWidth", "8 CutLineWidth"),
# Minimum dimension for selected layers
'minimumfeaturesize': (None, "S", "MinimumFeatureSize", "Use this option to automatically thicken features on particular layers.\nThis is intended for thickening silkscreen to some minimum width.\nThe value of this option must be a comma-separated list\nof layer names followed by minimum feature sizes (in inches) for that layer.\nComment this out to disable thickening. Example usage is:\n\nMinimumFeatureSize = *topsilkscreen,0.008,*bottomsilkscreen,0.008"),
# Name of file containing default tool list
'toollist': (None, "PI", "ToolList", "10 ToolList"),
# Tolerance for clustering drill sizes
'drillclustertolerance': ('.002', "DP", "DrillClusterTolerance", "11 DrillClusterTolerance"),
# Set to 1 to allow multiple jobs to have non-matching layers
'allowmissinglayers': (0, "BI", "AllowMissingLayers", "12 AllowMissingLayers"),
# Name of file to which to write fabrication drawing, or None
'fabricationdrawingfile': (None, "PO", "FabricationDrawingFile", "13 FabricationDrawingFile"),
# Name of file containing text to write to fab drawing
'fabricationdrawingtext': (None, "PI", "FabricationDrawingText", "14 FabricationDrawingText"),
# Number of digits after the decimal point in input Excellon files
'excellondecimals': (4, "IP", "ExcellonDecimals", "15 ExcellonDecimals"),
# Generate leading zeros in merged Excellon output file
'excellonleadingzeros': (0, "IP", "ExcellonLeadingZeros", "16 ExcellonLeadingZeros"),
# Name of file to which to write simple box outline, or None
'outlinelayerfile': (None, "PO", "OutlineLayerFile", "17 OutlineLayerFile"),
# Name of file to which to write scoring data, or None
'scoringfile': (None, "PO", "ScoringFile", "18 ScoringFile"),
# Inches of extra room to leave on left side of panel for tooling
'leftmargin': (0.0, "DP", "LeftMargin", "19 LeftMargin"),
# Inches of extra room to leave on top side of panel for tooling
'topmargin': (0.0, "DP", "TopMargin", "20 TopMargin"),
# Inches of extra room to leave on right side of panel for tooling
'rightmargin': (0.0, "DP", "RightMargin", "21 RightMargin"),
# Inches of extra room to leave on bottom side of panel for tooling
'bottommargin': (0.0, "DP", "BottomMargin", "22 BottomMargin"),
# List of X,Y points at which to draw fiducials
'fiducialpoints': (None, "S", "FiducialPoints", "23 FiducialPoints"),
}
DEFAULT_OPTIONS_TYPES = ["IP", "I", "DP", "D", "B", "BI", "S", "PI", "PO", "L"] # List of option types in display order
# [GerbMergeGUI] section defaults
DEFAULT_GERBMERGEGUI = {
'unit': "IN", # Unit inidicator: IN, MIL, MM
'layout': "AUTOMATIC", # Indicates layout: GRID, AUTOMATIC, MANUAL, GRID_FILE, MANUAL_FILE
'runtime': 10, # Seconds to run automatic placement
'rows': 1, # Number of rows in grid layout
'columns': 1, # Number of columns in grid layout
'mergedoutput': False, # Path of output directory
'mergedname': False, # Prefix of merged output files
'layoutfilepath': "", # Path of layout file
'placementfilepath': "", # Path of placement file
'configurationfilepath': "", # Path of configuration file
'configurationcomplete': False, # Indicates that run dialog may be skipped to upon load
}
# Job names
RE_VALID_JOB = re.compile(r'^[a-zA-Z0-9][a-zA-Z0-9_-]*$')
RE_VALID_JOB_MESSAGE = "Vaild Characters: a-z, A-Z, 0-9, underscores, hyphens\nFirst Character must be: a-z, A-Z, 0-9"
RESERVED_JOB_NAMES = ("Options", "MergeOutputFiles", "GerbMergeGUI") ##not implemented yet
# Layer names
RE_VALID_LAYER = re.compile(r'^[a-zA-Z0-9][a-zA-Z0-9_-]*$')
RE_VALID_LAYER_MESSAGE = "Vaild Characters: a-z, A-Z, 0-9, underscores, hyphens\nFirst Character must be: a-z, A-Z, 0-9"
DEFAULT_LAYERS = [ "BoardOutline",
"TopCopper",
"BottomCopper",
"InnerLayer2",
"InnerLayer3",
"TopSilkscreen",
"BottomSilkscreen",
"TopSoldermask",
"BottomSoldermask",
"TopSolderPasteMask",
"BottomSolderPasteMask",
"Drills" ]
REQUIRED_LAYERS = ["BoardOutline", "Drills"]
RESERVED_LAYER_NAMES = () ##add "mergeout", not implemented yet
#Output names
RE_VALID_OUTPUT_NAME = re.compile(r'^[a-zA-Z0-9_-]+$')
RE_VALID_OUTPUT_NAME_MESSAGE = "Vaild Characters: a-z, A-Z, 0-9, underscores, hyphens"
REQUIRED_LAYERS_OUTPUT = ["BoardOutline", "ToolList", "Placement", "Drills"]
# Default dictionary of layer names to file extensions
FILE_EXTENSIONS = { "boardoutline": "GBO",
"topcopper": "GTL",
"bottomcopper": "GBL",
"innerlayer2": "G2",
"innerlayer3": "G3",
"topsilkscreen": "GTO",
"bottomsilkscreen": "GBO",
"topsoldermask": "GTS",
"bottomsoldermask": "GBS",
"topsolderpastemask": "GTP",
"bottomsolderpastemask": "GBP",
"drills": "GDD",
"placement": "TXT",
"toollist": "DRL",
}
DEFAULT_EXTENSION = "GER"
#Gerbmerge options
PLACE_FILE = "--place-file="
NO_TRIM_GERBER = "--no-trim-gerber"
NO_TRIM_EXCELLON = "--no-trim-excellon"
ROTATED_OCTAGONS = "--octagons=rotate"
SEARCH_TIMEOUT = "--search-timeout="