added tinywall code

This commit is contained in:
yair reshef 2015-11-04 02:24:23 +02:00
parent 3663c05c29
commit 4f4e7c0bd2
2 changed files with 64 additions and 1 deletions

View File

@ -1,6 +1,6 @@
<?xml version="1.0" encoding="utf-8"?> <?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd"> <!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="7.1.0"> <eagle version="7.3.0">
<drawing> <drawing>
<settings> <settings>
<setting alwaysvectorfont="no"/> <setting alwaysvectorfont="no"/>

View File

@ -0,0 +1,63 @@
// ATMEL ATTINY85 running @ 8MHz / ARDUINO **Zvi Schneider 12-May-2014**
// +----\/---+
// ADC0, PB5, 1|* |8 VCC
// ADC3, PB3, 2| |7 PB2, ADC1
// ADC2, PB4, 3| |6 PB1,
// GND 4| |5 PB0,
// +---------+
#define my_milisec 76 // 76 interrupts equal 1 mili-sec (approximatly)
#define interval 100 //100 mili-sec interval between repetetive code transmitions
volatile long interrups_counter = 0;
byte virtual_wall = B10100010; // ROOMAs virtual wall code
int one_milisec = my_milisec;
int three_milisec = my_milisec * 3;
ISR (TIM0_COMPA_vect) { // interrupt service routine
interrups_counter +=1;
}
void setup(){
TCNT0 = 0; //initialize timer0 registers
TCCR0A=0;
TCCR0B=0;
TCCR0A |=(1<<COM0A0); //Timer0 in toggle mode (Table 11-2)
TCCR0A |=(1<<WGM01); //Timer0 in CTC mode (Table 11.5)
TCCR0B |= (1 << CS00);// Prescaler (table 11.6, no prescaling)
OCR0A=105-1; //CTC Compare value. with 8MHz clock and no prescaling this value will give interrupt every 13.125 micro-sec
TIMSK |= 1<<OCIE0A; //enable timer0 OCR0A interrups
SREG |= B10000000; //enable interrups
}
void loop(){
while (interrups_counter < my_milisec*interval){ //wait interval miliseconds
}
interrups_counter = 0;
xmitbyte(virtual_wall); //send one byte command to the ROOMBA
}
void xmitbyte(byte xmitdata){
int i;
int mark;
int space;
byte shift_one = B10000000;
for (i = 0; i < 8; i++){
if (xmitdata & shift_one){
mark = three_milisec;
space = one_milisec;
}
else {
mark = one_milisec;
space = three_milisec;
}
pinMode(PB0, OUTPUT); // mark, transmit IR pulses
while (interrups_counter < mark){
}
interrups_counter = 0;
pinMode(PB0, INPUT); // space, do not transmit IR pulses
while (interrups_counter < space){
}
interrups_counter = 0;
shift_one = shift_one >> 1;
}
}