diff --git a/.gitignore b/.gitignore index b63dd98..bf9159a 100644 --- a/.gitignore +++ b/.gitignore @@ -1,9 +1,9 @@ # Ignore list for Eagle, a PCB layout tool # Backup files -*.s#? -*.b#? -*.l#? +**/*.s#? +**/*.b#? +**/*.l#? # Eagle project file # It contains a serial number and references to the file structure @@ -12,26 +12,27 @@ eagle.epf # CAM files -*.$$$ -*.cmp -*.ly2 -*.l15 -*.sol -*.plc -*.stc -*.sts -*.crc -*.crs +**/*.$$$ +**/*.cmp +**/*.ly2 +**/*.l15 +**/*.sol +**/*.plc +**/*.stc +**/*.sts +**/*.crc +**/*.crs -*.dri -*.drl -*.gpi -*.pls +**/*.dri +**/*.drl +**/*.gpi +**/*.pls -*.drd -*.drd.* +**/*.drd +**/*.drd.* -*.info +**/*.info -*.eps -*.pro +**/*.eps +**/*.pro +**/*.job diff --git a/ATTAMI-V0.00.brd b/ATTAMI-V0.00.brd index a8b04f4..419eff4 100644 --- a/ATTAMI-V0.00.brd +++ b/ATTAMI-V0.00.brd @@ -1342,6 +1342,7 @@ design rules under a new name. +<<<<<<< HEAD @@ -1358,6 +1359,14 @@ design rules under a new name. +======= + + + + + + +>>>>>>> master diff --git a/ATTAMI-V0.00.sch b/ATTAMI-V0.00.sch index b78e8ae..ab4dd92 100644 --- a/ATTAMI-V0.00.sch +++ b/ATTAMI-V0.00.sch @@ -138,6 +138,7 @@ +a growing library for parts used in the ATtami project. more info at https://github.com/telavivmakers/at-tami diff --git a/ATtami.lbr b/ATtami.lbr index 6174037..8087b59 100644 --- a/ATtami.lbr +++ b/ATtami.lbr @@ -6,7 +6,11 @@ +<<<<<<< HEAD +======= + +>>>>>>> master @@ -37,18 +41,19 @@ - - - + + + - + + @@ -58,6 +63,7 @@ + @@ -71,6 +77,7 @@ + @@ -84,8 +91,12 @@ + + + + @@ -112,6 +123,9 @@ + + + @@ -261,8 +275,8 @@ ->NAME ->VALUE +>NAME +>VALUE @@ -272,7 +286,6 @@ -2,0 <b>PIN HEADER</b> @@ -349,8 +362,8 @@ ->NAME ->VALUE +>NAME +>VALUE @@ -412,8 +425,8 @@ ->NAME ->VALUE +>NAME +>VALUE @@ -423,9 +436,9 @@ - + Sparkfun SKU# COM-08229 @@ -453,6 +466,7 @@ >NAME >VALUE +<<<<<<< HEAD @@ -474,9 +488,388 @@ +======= + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + +>NAME + + + + + + + + + + +>NAME + + + + + + + + + + + + + + + + + + + + + + + + + + +The new Arduino R3 'classic' adds duplicate I2C pins and an IORef pin (and an unused pin + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +RST +3v +5v +Gnd +Vin +Analog In +0 +1 +2 +3 +4 +5 +ARef +Gnd +13 +12 +11 +10 +9 +8 +7 +6 +5 +4 +3 +2 +1 +0 +Digital I/O +Digital I/O +SCL +SDA +IOr + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +RST +3v +5v +Gnd +Vin +Analog In +0 +1 +2 +3 +4 +5 +ARef +Gnd +13 +12 +11 +10 +9 +8 +7 +6 +5 +4 +3 +2 +1 +0 +Digital I/O +Digital I/O +SCL +SDA +IOr + + + + + + + + + + +>NAME + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + +>>>>>>> master + + + + + + + + + + + + + +>NAME +>VALUE + @@ -731,6 +1124,7 @@ Sheet: +<<<<<<< HEAD @@ -744,9 +1138,163 @@ +======= + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME + + +GND +PB0 +PB1 +PB2 +GND +GND +PB3 +PB4 +PB5 +V_BAT +VCC + + + + + + + + + + + + + + + + + +ARDUINO +UNO R3 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>>>>>>> master + + + + + + + + + + + + + + + + + + + + + + @@ -878,7 +1426,7 @@ Basic schematic elements and footprints for 0603, 1206, and PTH resistors. - + <b>Mounting Hole</b> <p>For #2 screws (0.086"/2.18mm width, 0.094"/2.4mm hole) use 2.5mm</p> @@ -1093,6 +1641,7 @@ DIN A4, landscape with location and doc. field +<<<<<<< HEAD <b>VOLTAGE REGULATOR</b> @@ -1104,6 +1653,231 @@ DIN A4, landscape with location and doc. field +======= + +seven band Graphic Equalizer IC + + + + + + + + + + + + + + + + + + + + + + +foorprint for the ATtami dev board + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +This is a new object for the new Arduino R3 - with extra pins that you may want to use (such as IOref, and duplicated A4/A5 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>>>>>>> master diff --git a/DRC_DRU/Elecrow_2-layer_eagle_rule.dru b/DRC_DRU/Elecrow_2-layer_eagle_rule.dru new file mode 100644 index 0000000..e707db8 --- /dev/null +++ b/DRC_DRU/Elecrow_2-layer_eagle_rule.dru @@ -0,0 +1,70 @@ +description[de] = EAGLE Design Rules\n

\nDie Standard-Design-Rules sind so gewählt, dass sie für \ndie meisten Anwendungen passen. Sollte ihre Platine \nbesondere Anforderungen haben, treffen Sie die erforderlichen\nEinstellungen hier und speichern die Design Rules unter \neinem neuen Namen ab. +description[en] = EAGLE Design Rules\n

\nThe default Design Rules have been set to cover\na wide range of applications. Your particular design\nmay have different requirements, so please make the\nnecessary adjustments and save your customized\ndesign rules under a new name. +description[zh] = Elecrow EAGLE Design Rules\n +layerSetup = (1*16) +mtCopper = 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm +mtIsolate = 1.5mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm +mdWireWire = 6mil +mdWirePad = 6mil +mdWireVia = 6mil +mdPadPad = 6mil +mdPadVia = 6mil +mdViaVia = 6mil +mdSmdPad = 0mil +mdSmdVia = 0mil +mdSmdSmd = 0mil +mdViaViaSameLayer = 8mil +mnLayersViaInSmd = 2 +mdCopperDimension = 10mil +mdDrill = 10mil +mdSmdStop = 0mil +msWidth = 6mil +msDrill = 12mil +msMicroVia = 12mil +msBlindViaRatio = 0.500000 +rvPadTop = 0.250000 +rvPadInner = 0.250000 +rvPadBottom = 0.250000 +rvViaOuter = 0.250000 +rvViaInner = 0.250000 +rvMicroViaOuter = 0.250000 +rvMicroViaInner = 0.250000 +rlMinPadTop = 10mil +rlMaxPadTop = 20mil +rlMinPadInner = 10mil +rlMaxPadInner = 20mil +rlMinPadBottom = 10mil +rlMaxPadBottom = 20mil +rlMinViaOuter = 6mil +rlMaxViaOuter = 20mil +rlMinViaInner = 6mil +rlMaxViaInner = 20mil +rlMinMicroViaOuter = 4mil +rlMaxMicroViaOuter = 20mil +rlMinMicroViaInner = 4mil +rlMaxMicroViaInner = 20mil +psTop = -1 +psBottom = -1 +psFirst = 0 +psElongationLong = 100 +psElongationOffset = 100 +mvStopFrame = 1.000000 +mvCreamFrame = 0.000000 +mlMinStopFrame = 2mil +mlMaxStopFrame = 2mil +mlMinCreamFrame = 0mil +mlMaxCreamFrame = 0mil +mlViaStopLimit = 100mil +srRoundness = 0.000000 +srMinRoundness = 0mil +srMaxRoundness = 0mil +slThermalIsolate = 10mil +slThermalsForVias = 0 +dpMaxLengthDifference = 10mm +dpGapFactor = 2.500000 +checkGrid = 0 +checkAngle = 0 +checkFont = 1 +checkRestrict = 0 +useDiameter = 13 +maxErrors = 50 diff --git a/TAMI-oshpark-gerb274x.cam b/DRC_DRU/Elecrow_Gerber_Generater_DrillAlign.cam similarity index 70% rename from TAMI-oshpark-gerb274x.cam rename to DRC_DRU/Elecrow_Gerber_Generater_DrillAlign.cam index 608a454..c48f972 100644 --- a/TAMI-oshpark-gerb274x.cam +++ b/DRC_DRU/Elecrow_Gerber_Generater_DrillAlign.cam @@ -1,5 +1,7 @@ [CAM Processor Job] -Description[en]="\n\n\n\n\n\n\n\n\n\n\nSparkFun Gerber Generator

\n\nThis CAM job creates the seven needed files to have a PCB created. Based on the original Eagle gerb274x.cam file.

\nYou will get seven gerber files that contain data for:
\ngerber top layer (copper layer): *.GTL
\ngerber top overlay (silkscreen layer): *.GTO
\ngerber top soldermask (soldermask layer): *.GTS
\n\ngerber bottom layer (copper layer): *.GBL
\ngerber bottom overlay (silkscreen layer): *.GBO
\ngerber bottom soldermask (soldermask layer): *.GBS
\n\nExcellon Drill File: *.TXT

\nThese files, zipped together, are the only 7 files you need to have a PCB made at nearly any fab house.\n" +Description[de]="Erzeugt Extended-Gerber-Format (RS274X)

\nDieser CAM-Job besteht aus fünf Arbeitsschritten und erzeugt Fertigungsdaten für eine zweilagige Platine.

\nDie fünf Gerberdateien enthalten Daten für:
\nBestückungsseite *.cmp
\nLötseite *.sol
\nBestückungsdruck oben *.plc
\nLötstoplack Bestückungsseite *.stc
\nLötstoplack Lötseite *.sts
" +Description[en]="Seeed Studio 2-layer PCB Gerber Generator
\nYou will get 10 RS274-x format gerber files:

\n\nTop Layer: pcbname.GTL
\nSilk Top: pcbname.GTO
\nSolderMask Top: pcbname.GTS
\nSMD paste Top: pcbname.GTP

\n\nBottom Layer: pcbname.GBL
\nSilk Bottom: pcbname.GBO
\nSolderMask Bottom: pcbname.GBS
\nSMD paste Bottom: pcbname.GBP

\n\nSolt Drills/Hole: pcbname.GML ---> the Milling Layer(layer46)
\nNC Drill file:pcbname.TXT

\n\nIt works well with our Fusion PCB Service:
\nhttp://www.seeedstudio.com/depot/index.php?main_page=advanced_search_result&search_in_description=1&keyword=Fusion\n\n\n" +Description[zh]="Seeed Studio Gerber Generater

\nThis CAM job consists of 10 sections that generate data for a two layer board.

\nYou will get 10 gerber files that contain data for:
\nTop trace layer *.GTL
\nTop slikscreen layer *.GTO
\nTop pad paste layer *.GTP
\nTop solder mask layer *.GTS
\nBottom trace layer *.GBL
\nBottom slikscreen layer *.GBO
\nBottom pad paste layer *.GBP
\nBottom solder mask layer *.GBS
\nSlot data *.GML
\nNC Drills *.TXT
\n" Section=Sec_1 Section=Sec_2 Section=Sec_3 @@ -12,166 +14,16 @@ Section=Sec_9 Section=Sec_10 [Sec_1] -Name[en]="Board Outline" -Name[he]="Board Outline" -Prompt="" -Device="GERBER_RS274X" -Wheel="" -Rack="" -Scale=1 -Output=".GKO" -Flags="0 0 0 1 0 1 1" -Emulate="0" -Offset="0.0mil 0.0mil" -Sheet=1 -Tolerance="0 0 0 0 0 0" -Pen="0.0mil 0" -Page="12000.0mil 8000.0mil" -Layers=" 20" -Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" - -[Sec_2] -Name[en]="Top Copper" -Name[he]="Top Copper" -Prompt="" -Device="GERBER_RS274X" -Wheel="" -Rack="" -Scale=1 -Output=".GTL" -Flags="0 0 0 1 0 1 1" -Emulate="0" -Offset="0.0mil 0.0mil" -Sheet=1 -Tolerance="0 0 0 0 0 0" -Pen="0.0mil 0" -Page="12000.0mil 8000.0mil" -Layers=" 1 17 18 20" -Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" - -[Sec_3] -Name[en]="Bottom Copper" -Name[he]="Bottom Copper" -Prompt="" -Device="GERBER_RS274X" -Wheel=".whl" -Rack="" -Scale=1 -Output=".GBL" -Flags="0 0 0 1 0 1 1" -Emulate="0" -Offset="0.0mil 0.0mil" -Sheet=1 -Tolerance="0 0 0 0 0 0" -Pen="0.0mil 0" -Page="12000.0mil 8000.0mil" -Layers=" 16 17 18" -Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" - -[Sec_4] -Name[en]="Top Silkscreen" -Name[he]="Top Silkscreen" -Prompt="" -Device="GERBER_RS274X" -Wheel=".whl" -Rack="" -Scale=1 -Output=".GTO" -Flags="0 0 0 1 0 1 1" -Emulate="0" -Offset="0.0mil 0.0mil" -Sheet=1 -Tolerance="0 0 0 0 0 0" -Pen="0.0mil 0" -Page="12000.0mil 8000.0mil" -Layers=" 21 25" -Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" - -[Sec_5] -Name[en]="Top Paste" -Name[he]="Top Paste" -Prompt="" -Device="GERBER_RS274X" -Wheel=".whl" -Rack="" -Scale=1 -Output=".GTP" -Flags="0 0 0 1 0 1 1" -Emulate="0" -Offset="0.0mil 0.0mil" -Sheet=1 -Tolerance="0 0 0 0 0 0" -Pen="0.0mil 0" -Page="12000.0mil 8000.0mil" -Layers=" 31" -Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" - -[Sec_6] -Name[en]="Bottom Silkscreen" -Name[he]="Bottom Silkscreen" -Prompt="" -Device="GERBER_RS274X" -Wheel=".whl" -Rack="" -Scale=1 -Output=".GBO" -Flags="0 0 0 1 0 1 1" -Emulate="0" -Offset="0.0mil 0.0mil" -Sheet=1 -Tolerance="0 0 0 0 0 0" -Pen="0.0mil 0" -Page="12000.0mil 8000.0mil" -Layers=" 22 26" -Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" - -[Sec_7] -Name[en]="Top Soldermask" -Name[he]="Top Soldermask" -Prompt="" -Device="GERBER_RS274X" -Wheel=".whl" -Rack="" -Scale=1 -Output=".GTS" -Flags="0 0 0 1 0 1 1" -Emulate="0" -Offset="0.0mil 0.0mil" -Sheet=1 -Tolerance="0 0 0 0 0 0" -Pen="0.0mil 0" -Page="12000.0mil 8000.0mil" -Layers=" 29" -Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" - -[Sec_8] -Name[en]="Bottom Soldermask" -Name[he]="Bottom Soldermask" -Prompt="" -Device="GERBER_RS274X" -Wheel=".whl" -Rack="" -Scale=1 -Output=".GBS" -Flags="0 0 0 1 0 1 1" -Emulate="0" -Offset="0.0mil 0.0mil" -Sheet=1 -Tolerance="0 0 0 0 0 0" -Pen="0.0mil 0" -Page="12000.0mil 8000.0mil" -Layers=" 30" -Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" - -[Sec_9] -Name[en]="Drill File" -Name[he]="Drill File" -Prompt="" +Name[de]="Lötstopmaske Lötseite" +Name[en]="Drills&Holes" +Name[zh]="drill data" +Prompt[en]="" +Prompt[zh]="" Device="EXCELLON" Wheel="" Rack="" Scale=1 -Output=".TXT" +Output="%N.TXT" Flags="0 0 0 1 0 1 1" Emulate="0" Offset="0.0mil 0.0mil" @@ -182,21 +34,191 @@ Page="12000.0mil 8000.0mil" Layers=" 44 45" Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" -[Sec_10] -Name[en]="Mill Layer" -Name[he]="Mill Layer" -Prompt="" +[Sec_2] +Name[de]="Lötstopmaske Lötseite" +Name[en]="Slot drills/holes" +Name[zh]="edge milling" +Prompt[en]="" +Prompt[zh]="" Device="GERBER_RS274X" Wheel="" Rack="" Scale=1 -Output=".GML" +Output="%N.GML" Flags="0 0 0 1 0 1 1" Emulate="0" Offset="0.0mil 0.0mil" Sheet=1 Tolerance="0 0 0 0 0 0" Pen="0.0mil 0" -Page="11000.0mil 16000.0mil" -Layers=" 46" +Page="12000.0mil 8000.0mil" +Layers=" 20 46" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_3] +Name[de]="Lötstopmaske Lötseite" +Name[en]="Solder paste bottom" +Name[zh]="padmask bottom" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel=".whl" +Rack="" +Scale=1 +Output="%N.GBP" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 20 32" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_4] +Name[de]="Lötstopmaske Lötseite" +Name[en]="Solder paste top" +Name[zh]="padmask top" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel=".whl" +Rack="" +Scale=1 +Output="%N.GTP" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 20 31" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_5] +Name[de]="Lötstopmaske Lötseite" +Name[en]="Solder Mask bottom" +Name[zh]="solder mask bottom" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel=".whl" +Rack="" +Scale=1 +Output="%N.GBS" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 20 30" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_6] +Name[de]="Lötstopmaske Lötseite" +Name[en]="Solder Mask top" +Name[zh]="solder mask top" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel=".whl" +Rack="" +Scale=1 +Output="%N.GTS" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 20 29" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_7] +Name[de]="Lötstopmaske Lötseite" +Name[en]="Silk bottom" +Name[zh]="silk bottom" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel=".whl" +Rack="" +Scale=1 +Output="%N.GBO" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 20 22 26" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_8] +Name[de]="Lötstopmaske Lötseite" +Name[en]="Silk top" +Name[zh]="silk top" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel=".whl" +Rack="" +Scale=1 +Output="%N.GTO" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 20 21 25" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_9] +Name[de]="Lötstopmaske Lötseite" +Name[en]="Bottom layer" +Name[zh]="bottom copper" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel=".whl" +Rack="" +Scale=1 +Output="%N.GBL" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 16 17 18 20" +Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" + +[Sec_10] +Name[de]="Lötstopmaske Lötseite" +Name[en]="Top Layer" +Name[zh]="top copper" +Prompt[en]="" +Prompt[zh]="" +Device="GERBER_RS274X" +Wheel=".whl" +Rack="" +Scale=1 +Output="%N.GTL" +Flags="0 0 0 1 0 1 1" +Emulate="0" +Offset="0.0mil 0.0mil" +Sheet=1 +Tolerance="0 0 0 0 0 0" +Pen="0.0mil 0" +Page="12000.0mil 8000.0mil" +Layers=" 1 17 18 20" Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" diff --git a/README.md b/README.md index bfbe049..abca03e 100644 --- a/README.md +++ b/README.md @@ -1,8 +1,10 @@ ATtami עָלֵקדוּאִינו ================= +[![Gitter](https://badges.gitter.im/Join%20Chat.svg)](https://gitter.im/telavivmakers/at-tami?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge) + fork of littlewire AVR based Vusb dev board and various other efforts around the ATtiny85
-more at http://telavivmakers.org/index.php/ATtami
+more at http://telavivmakers.org/ATtami
and here http://mcu.soup.io

ATtami board (ver 16) diff --git a/plotter/tutu_vectorized.svg b/plotter/tutu_vectorized.svg new file mode 100644 index 0000000..f198085 --- /dev/null +++ b/plotter/tutu_vectorized.svg @@ -0,0 +1,65 @@ + + + + + + + + + + image/svg+xml + + + + + + + + + diff --git a/shields/3stateDriver/udi/udi.brd b/shields/3stateDriver/udi/udi.brd new file mode 100644 index 0000000..e82b5c3 --- /dev/null +++ b/shields/3stateDriver/udi/udi.brd @@ -0,0 +1,577 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<h3>SparkFun Electronics' preferred foot prints</h3> +In this library you'll find all manner of analog ICs- DACs, ADCs, video chips, op-amps, and others.<br><br> +We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. +<br><br> +<b>Licensing:</b>Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ +<br><br> +You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + +<b>Small Outline Package</b> Fits JEDEC packages (narrow SOIC-8) + + + + + + + + + + + + + + + + + + + + + +>VALUE +>NAME + + + + +<h3>SparkFun Electronics' preferred foot prints</h3> +In this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.<br><br> +We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. +<br><br> +<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ +<br><br> +You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + +<b>8M, 8-Lead, 0.118" Wide, Miniature Small Outline Package</b><p> +MSOP<br> +8M-Package doc1097.pdf + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +<h3>SparkFun Electronics' preferred foot prints</h3> +In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br> +We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. +<br><br> +<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ +<br><br> +You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + +<b>Chip Resistor Array</b> size 4 × 0603<p> +convex termination - Phycomp Components<br> +Source: RS Components + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>EAGLE Design Rules</b> +<p> +Die Standard-Design-Rules sind so gewählt, dass sie für +die meisten Anwendungen passen. Sollte ihre Platine +besondere Anforderungen haben, treffen Sie die erforderlichen +Einstellungen hier und speichern die Design Rules unter +einem neuen Namen ab. +<b>EAGLE Design Rules</b> +<p> +The default Design Rules have been set to cover +a wide range of applications. Your particular design +may have different requirements, so please make the +necessary adjustments and save your customized +design rules under a new name. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/shields/3stateDriver/udi/udi.sch b/shields/3stateDriver/udi/udi.sch new file mode 100644 index 0000000..5e0a10e --- /dev/null +++ b/shields/3stateDriver/udi/udi.sch @@ -0,0 +1,741 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<h3>SparkFun Electronics' preferred foot prints</h3> +In this library you'll find all manner of analog ICs- DACs, ADCs, video chips, op-amps, and others.<br><br> +We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. +<br><br> +<b>Licensing:</b>Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ +<br><br> +You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + +<b>Small Outline Package</b> Fits JEDEC packages (narrow SOIC-8) + + + + + + + + + + + + + + + + + + + + + +>VALUE +>NAME + + +<b>Dual In Line</b> + + + + + + + + + + + + + + + +>VALUE +>NAME + + + + + + + + + + + + +>NAME +>VALUE +V+ +V- + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + +Generic op-amp footprint + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<h3>SparkFun Electronics' preferred foot prints</h3> +In this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.<br><br> +We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. +<br><br> +<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ +<br><br> +You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + +<b>8M, 8-Lead, 0.118" Wide, Miniature Small Outline Package</b><p> +MSOP<br> +8M-Package doc1097.pdf + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +D +S +G + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE +D +S +G + + + + + + + + + + +30V Dual PMOS/NMOS MSOP-8<BR> +NMOS RDS .11-ohm<BR> +PMOS RDS .20-ohm<BR> +TRANS-07913 + + + + + + + + + + + + + + + + + + + + + + + + + +<h3>SparkFun Electronics' preferred foot prints</h3> +In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br> +We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. +<br><br> +<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ +<br><br> +You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + +<b>Chip Resistor Array</b> size 4 × 0603<p> +convex termination - Phycomp Components<br> +Source: RS Components + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>Array Chip Resistor</b><p> +Source: RS Component / Phycomp + + + + + + + + + + + + + + + + + + + + + + + + + + + +<h3>SparkFun Electronics' preferred foot prints</h3> +In this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.<br><br> +We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. +<br><br> +<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ +<br><br> +You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + + + +Isolated ground + + + + +>VALUE + + + + + +Isolated ground + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/shields/ATTAMI-Shield-template.sch b/shields/ATTAMI-Shield-template.sch index 82e9789..9638dd1 100644 --- a/shields/ATTAMI-Shield-template.sch +++ b/shields/ATTAMI-Shield-template.sch @@ -134,127 +134,16 @@ - -<h3>SparkFun Electronics' preferred foot prints</h3> -We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com. -<br><br> -<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + - - - - ->VALUE - - - - - -<b>SUPPLY SYMBOL</b> - - - - - - - - - - - - - - -<h2><b>microBuilder.eu</b> Eagle Footprint Library</h2> - -<p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p> - -<h3>Obligatory Warning</h3> -<p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p> - -<h3>License</h3> -<p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p> -<p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -</p> - - - - - - - - - - - - -3,0 - - - - - - - - - -1,0 - - - - - - - - - -2,0 - - - - - - - - - -3,0 - - - - - - - - - - - - - - - - - - -<b>PIN HEADER</b> - - - - - - - - ->NAME ->VALUE - - - - - - - + + + + +>NAME +>VALUE + + @@ -275,77 +164,27 @@ We've spent an enormous amount of time creating and checking these footprints an - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - ->NAME ->VALUE - - - - -<b>PIN HEADER</b> - - - ->NAME ->VALUE - - - - -<p><b>Pin Headers</b><br/> -2 Pin, 0.1"/2.54mm pitch, SMT</p> - - - ->NAME ->VALUE + + + + + + + + +2,0 - - - + + + + + +>NAME +>VALUE + + @@ -362,165 +201,6 @@ We've spent an enormous amount of time creating and checking these footprints an - - - - - ->NAME ->VALUE - - - - - - -<b>Mounting Hole</b> -<p>For #2 screws (0.086"/2.18mm width, 0.094"/2.4mm hole) use 2.5mm</p> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<b>PIN HEADER</b> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<b>PIN HEADER</b> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<b>Frames for Sheet and Layout</b> - - - @@ -544,8 +224,56 @@ We've spent an enormous amount of time creating and checking these footprints an Sheet: + + + + + + +>VALUE + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + <b>FRAME</b><p> DIN A4, landscape with location and doc. field @@ -560,6 +288,33 @@ DIN A4, landscape with location and doc. field + +<b>Mounting Hole</b> +<p>For #2 screws (0.086"/2.18mm width, 0.094"/2.4mm hole) use 2.5mm</p> + + + + + + + + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + @@ -574,15 +329,15 @@ DIN A4, landscape with location and doc. field - - - - - - - - - + + + + + + + + + diff --git a/shields/ATTAMI-Shield-template.brd b/shields/chargeShield/ATTAMI-Shield-charge.brd similarity index 82% rename from shields/ATTAMI-Shield-template.brd rename to shields/chargeShield/ATTAMI-Shield-charge.brd index 78ddc67..fb7a094 100644 --- a/shields/ATTAMI-Shield-template.brd +++ b/shields/chargeShield/ATTAMI-Shield-charge.brd @@ -28,13 +28,13 @@ - - - + + + - + - + @@ -58,8 +58,8 @@ - - + + @@ -660,59 +660,6 @@ disable layers: tNames, bNames, tPlace, bPlace - -<h2><b>microBuilder.eu</b> Eagle Footprint Library</h2> - -<p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p> - -<h3>Obligatory Warning</h3> -<p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p> - -<h3>License</h3> -<p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p> -<p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -</p> - - - - - - - - - -2,0 - - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - - - ->NAME ->VALUE - - - - - @@ -751,6 +698,96 @@ disable layers: tNames, bNames, tPlace, bPlace + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + +2,0 + + + + + + + + + + + + + + + + +>NAME + + + + + + +>NAME +>VALUE + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + @@ -932,18 +969,43 @@ disable layers: tNames, bNames, tPlace, bPlace - - - + + + - + - + - + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -962,11 +1024,21 @@ disable layers: tNames, bNames, tPlace, bPlace - - + + + + + + + + + + + + @@ -974,8 +1046,15 @@ disable layers: tNames, bNames, tPlace, bPlace - + + + + + + + + @@ -995,6 +1074,60 @@ disable layers: tNames, bNames, tPlace, bPlace + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/shields/chargeShield/ATTAMI-Shield-charge.sch b/shields/chargeShield/ATTAMI-Shield-charge.sch new file mode 100644 index 0000000..c2ff473 --- /dev/null +++ b/shields/chargeShield/ATTAMI-Shield-charge.sch @@ -0,0 +1,841 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + +2,0 + + + + + + + + + + + + + + + + +>NAME + + + + + + +>NAME +>VALUE + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + +>DRAWING_NAME +>LAST_DATE_TIME +>SHEET +Sheet: + + + + + + + + +>VALUE + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + +<b>FRAME</b><p> +DIN A4, landscape with location and doc. field + + + + + + + + + + + + +<b>Mounting Hole</b> +<p>For #2 screws (0.086"/2.18mm width, 0.094"/2.4mm hole) use 2.5mm</p> + + + + + + + + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Resistor</b> +Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + + + + + + + + + + + + + + + + +Light Emitting Diode + + + + + + + + + + + + + + + + +<b>Capacitor</b> +Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +more at github.com/telavivmakers/at-tami + +Notes: +1. D1 and D2 are Blue LEDs they might not light when using Vi_BAT <4V~ +2. When VCC is less than 5V change the system clock of the ATTINY85 to 8MHz or less - +refer to the datasheet P163 Section 21-3 Speed + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +T.A.M.I hackerspace crew +LICENSE: CERN OHL 1.7 +VCC (output) +V_BAT (input) +RESET/ADC0 +PWM/ADC3 +SCK/SCL/ADC1 +PWM/ADC2 +MISO/PWM +AREF/MOSI/SDA/PWM +on chip + +4 +5 +6 +7 +2 +3 +1 +8 +(not on header) VCC +this should only be used when VBAT is +connected to via source between 0.3-8V + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Since Version 6.2.2 text objects can contain more than one line, +which will not be processed correctly with this version. + + + diff --git a/shields/serialShield/ATTAMI-Shield-serial.brd b/shields/serialShield/ATTAMI-Shield-serial.brd new file mode 100644 index 0000000..82565b6 --- /dev/null +++ b/shields/serialShield/ATTAMI-Shield-serial.brd @@ -0,0 +1,1153 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +VCC +PB2 +PB1 +PB0 +PB3 +PB4 +PB5 + + + + + +BAT +J2 + + + + + + + + + + + + +PB2 +PB1 +PB0 +PB3 +PB4 +PB5 + + + + + + + + + + +BAT +VCC + + + + + ++ +to hide the silkscreen: +disable layers: tNames, bNames, tPlace, bPlace +more at github.com/telavivmakers/at-tami + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +V 0.00 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + +2,0 + + + + +<h3>SparkFun Electronics' preferred foot prints</h3> +We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com. +<br><br> +<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + +<b>Small Outline package</b> 150 mil + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>VALUE +>NAME + + + + + + + + + + + + + + + + + + + + + + + + + + + +>Name +>Value + + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + +<b>Dirty Cheap Dirty Board Design Rules</b> +<br> +<br>Min width/Spacing: 5/5mil +<br>Min diameter of finished hole 12mil + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Since Version 6.2.2 text objects can contain more than one line, +which will not be processed correctly with this version. + + + diff --git a/shields/serialShield/ATTAMI-Shield-serial.sch b/shields/serialShield/ATTAMI-Shield-serial.sch new file mode 100644 index 0000000..db99475 --- /dev/null +++ b/shields/serialShield/ATTAMI-Shield-serial.sch @@ -0,0 +1,3095 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + +2,0 + + + + + + + + +>NAME +>VALUE + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + +>DRAWING_NAME +>LAST_DATE_TIME +>SHEET +Sheet: + + + + + + + + +>VALUE + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + +<b>FRAME</b><p> +DIN A4, landscape with location and doc. field + + + + + + + + + + + + +<b>Mounting Hole</b> +<p>For #2 screws (0.086"/2.18mm width, 0.094"/2.4mm hole) use 2.5mm</p> + + + + + + + + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +chip + + + + + + + + +>NAME +>VALUE + + + + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 2.4 x 4.4 mm + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 2.5 x 5 mm + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 3 x 5 mm + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 4 x 5 mm + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 5 x 5 mm + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 mm, outline 6 x 5 mm + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 mm + 5 mm, outline 2.4 x 7 mm + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 + 5 mm, outline 2.5 x 7.5 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 + 5 mm, outline 3.5 x 7.5 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 + 5 mm, outline 4.5 x 7.5 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 2.5 + 5 mm, outline 5.5 x 7.5 mm + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 2.4 x 4.4 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 2.5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 4.5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 3 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 5.5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 7.5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +Horizontal, grid 5 mm, outline 7.5 x 7.5 mm + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>CAPACITOR</b><p> +grid 7.5 mm, outline 3.2 x 10.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 7.5 mm, outline 4.2 x 10.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 7.5 mm, outline 5.2 x 10.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 10.2 mm, outline 4.3 x 13.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 10.2 mm, outline 5.4 x 13.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 10.2 mm, outline 6.4 x 13.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 10.2 mm + 15.2 mm, outline 6.2 x 18.4 mm + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 15 mm, outline 5.4 x 18.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 15 mm, outline 6.4 x 18.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 15 mm, outline 7.2 x 18.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 15 mm, outline 8.4 x 18.3 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 15 mm, outline 9.1 x 18.2 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 22.5 mm, outline 6.2 x 26.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 22.5 mm, outline 7.4 x 26.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 22.5 mm, outline 8.7 x 26.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 22.5 mm, outline 10.8 x 26.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 22.5 mm, outline 11.3 x 26.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 9.3 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 11.3 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 13.4 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 20.5 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 32.5 mm, outline 13.7 x 37.4 mm + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 32.5 mm, outline 16.2 x 37.4 mm + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 32.5 mm, outline 18.2 x 37.4 mm + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 37.5 mm, outline 19.2 x 41.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 37.5 mm, outline 20.3 x 41.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 5 mm, outline 3.5 x 7.5 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 37.5 mm, outline 15.5 x 41.8 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 7.5 mm, outline 6.3 x 10.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 15.4 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>CAPACITOR</b><p> +grid 27.5 mm, outline 17.3 x 31.6 mm + + + + + + + + + + + + + + + + +>NAME +>VALUE + + +<b>Ceramic Chip Capacitor KEMET 0204 Reflow solder</b><p> +Metric Code Size 1005 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 0603 Reflow solder</b><p> +Metric Code Size 1608 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 0805 Reflow solder</b><p> +Metric Code Size 2012 + + + + + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 1206 Reflow solder</b><p> +Metric Code Size 3216 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 1210 Reflow solder</b><p> +Metric Code Size 3225 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 1812 Reflow solder</b><p> +Metric Code Size 4532 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 1825 Reflow solder</b><p> +Metric Code Size 4564 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 2220 Reflow solder</b><p> +Metric Code Size 5650 + + + + +>NAME +>VALUE + + + + +<b>Ceramic Chip Capacitor KEMET 2225 Reflow solder</b><p> +Metric Code Size 5664 + + + + +>NAME +>VALUE + + + + + + + + + + +>NAME +>VALUE + + + + + + +<B>CAPACITOR</B>, American symbol + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<h3>SparkFun Electronics' preferred foot prints</h3> +We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com. +<br><br> +<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + + + + + + + + + + +>Name +>Value + + + + + + + + + + + +<b>Small Outline package</b> 150 mil + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>VALUE +>NAME + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + +<b>Resonator</b> +Small SMD resonator. This is the itty bitty 10/20MHz resonators with built in caps. CSTCE10M0G55 and CSTCE20M0V53. Footprint has been reviewed closely but hasn't been tested yet. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Spark Fun Electronics' preferred foot prints. <b>Not to be used for commercial purposes.</b> We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com. + + + + + +>VALUE + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +more at github.com/telavivmakers/at-tami + +Notes: +1. D1 and D2 are Blue LEDs they might not light when using Vi_BAT <4V~ +2. When VCC is less than 5V change the system clock of the ATTINY85 to 8MHz or less - +refer to the datasheet P163 Section 21-3 Speed + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +T.A.M.I hackerspace crew +LICENSE: CERN OHL 1.7 +VCC (output) +V_BAT (input) +RESET/ADC0 +PWM/ADC3 +SCK/SCL/ADC1 +PWM/ADC2 +MISO/PWM +AREF/MOSI/SDA/PWM +on chip + +4 +5 +6 +7 +2 +3 +1 +8 +(not on header) VCC + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Since Version 6.2.2 text objects can contain more than one line, +which will not be processed correctly with this version. + + + diff --git a/shields/stepperDriver/ATTAMI-Shield-stepperDriver.brd b/shields/stepperDriver/ATTAMI-Shield-stepperDriver.brd index 5f9cbdb..0b75484 100644 --- a/shields/stepperDriver/ATTAMI-Shield-stepperDriver.brd +++ b/shields/stepperDriver/ATTAMI-Shield-stepperDriver.brd @@ -647,6 +647,8 @@ design rules under a new name. + + @@ -697,11 +699,6 @@ design rules under a new name. - - - - - diff --git a/shields/stepperDriver/ATTAMI-Shield-stepperDriver.sch b/shields/stepperDriver/ATTAMI-Shield-stepperDriver.sch index 700b152..aa067be 100644 --- a/shields/stepperDriver/ATTAMI-Shield-stepperDriver.sch +++ b/shields/stepperDriver/ATTAMI-Shield-stepperDriver.sch @@ -3322,6 +3322,7 @@ LICENSE: CERN OHL 1.7 as a digital logic and bellow 0.9v as reset. see instructables.com/id/Attiny85-as-a-StepDir-Stepper-Motor-Controller +I2C @@ -3471,7 +3472,10 @@ see instructables.com/id/Attiny85-as-a-StepDir-Stepper-Motor-Controller @@ -3521,13 +3525,6 @@ see instructables.com/id/Attiny85-as-a-StepDir-Stepper-Motor-Controller - - - - - - - diff --git a/shields/tutuShield/tutuShield.brd b/shields/tutuShield/tutuShield.brd new file mode 100644 index 0000000..a48d5ca --- /dev/null +++ b/shields/tutuShield/tutuShield.brd @@ -0,0 +1,852 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +VCC +PB2 +PB1 +PB0 +PB3 +PB4 + + + + + +BAT +J2 + + + + + + + + + + + + +PB2 +PB1 +PB0 +PB3 +PB4 +PB5 + + + + + + + + + + +BAT +VCC + + + + + +to hide the silkscreen: +disable layers: tNames, bNames, tPlace, bPlace +more at github.com/telavivmakers/at-tami + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +MIC + + + + + + + + + + +R +G +B +Midburn 2015 +Tutu Shield +by +Maayan Dreamer + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<h2><b>microBuilder.eu</b> Eagle Footprint Library</h2> + +<p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p> + +<h3>Obligatory Warning</h3> +<p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p> + +<h3>License</h3> +<p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p> +<p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +</p> + + + + + + + + + +2,0 + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +>NAME +>VALUE + + + + + + + + + +>NAME +>VALUE + + + + + + + + +Dangerous Prototypes Standard PCB sizes +http://dangerousprototypes.com + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + +<b>EAGLE Design Rules</b> +<p> +Die Standard-Design-Rules sind so gewählt, dass sie für +die meisten Anwendungen passen. Sollte ihre Platine +besondere Anforderungen haben, treffen Sie die erforderlichen +Einstellungen hier und speichern die Design Rules unter +einem neuen Namen ab. +<b>EAGLE Design Rules</b> +<p> +The default Design Rules have been set to cover +a wide range of applications. Your particular design +may have different requirements, so please make the +necessary adjustments and save your customized +design rules under a new name. +<b>Elecrow EAGLE Design Rules</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Since Version 6.2.2 text objects can contain more than one line, +which will not be processed correctly with this version. + + + diff --git a/shields/tutuShield/tutuShield.sch b/shields/tutuShield/tutuShield.sch new file mode 100644 index 0000000..223ef91 --- /dev/null +++ b/shields/tutuShield/tutuShield.sch @@ -0,0 +1,1317 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<h3>SparkFun Electronics' preferred foot prints</h3> +We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com. +<br><br> +<b>Licensing:</b> CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. + + + + + +>VALUE + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + + + +<h2><b>microBuilder.eu</b> Eagle Footprint Library</h2> + +<p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p> + +<h3>Obligatory Warning</h3> +<p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p> + +<h3>License</h3> +<p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p> +<p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +</p> + + + + + + + + + + + + +3,0 + + + + + + + + + +1,0 + + + + + + + + + +2,0 + + + + + + + + + +3,0 + + + + + + + + + + + + + + + + + + +<b>PIN HEADER</b> + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>PIN HEADER</b> + + + +>NAME +>VALUE + + + + +<p><b>Pin Headers</b><br/> +2 Pin, 0.1"/2.54mm pitch, SMT</p> + + + +>NAME +>VALUE + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<b>Mounting Hole</b> +<p>For #2 screws (0.086"/2.18mm width, 0.094"/2.4mm hole) use 2.5mm</p> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Frames for Sheet and Layout</b> + + + + + + + + + + + + + + + + + + + + +>DRAWING_NAME +>LAST_DATE_TIME +>SHEET +Sheet: + + + + + +<b>FRAME</b><p> +DIN A4, landscape with location and doc. field + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + +>NAME +>VALUE + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +>NAME +>VALUE + + + + + + + + +seven band Graphic Equalizer IC + + + + + + + + + + + + + + + + + + + + + + +<b>Capacitor</b> +Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. + + + + + + + + + + + + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + +<b>Resistor</b> +Basic schematic elements and footprints for 0603, 1206, and PTH resistors. + + + + + + + + + + + + + + + + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + +Dangerous Prototypes Standard PCB sizes +http://dangerousprototypes.com + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +<p>Most commonly used is <b>SOT23-BEC</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +more at github.com/telavivmakers/at-tami + +Notes: +1. D1 and D2 are Blue LEDs they might not light when using Vi_BAT <4V~ +2. When VCC is less than 5V change the system clock of the ATTINY85 to 8MHz or less - +refer to the datasheet P163 Section 21-3 Speed + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +T.A.M.I hackerspace crew +LICENSE: CERN OHL 1.7 +VCC (output) +V_BAT (input) +RESET/ADC0 +PWM/ADC3 +SCK/SCL/ADC1 +PWM/ADC2 +MISO/PWM +AREF/MOSI/SDA/PWM +on chip + +4 +5 +6 +7 +2 +3 +1 +8 +(not on header) VCC +nice trick to use the 2.5-5v range +as a digital logic and bellow 0.9v as reset. + +see instructables.com/id/Attiny85-as-a-StepDir-Stepper-Motor-Controller +nice trick to use the 2.5-5v range +as an ADC/ logic input to the attiny +and below 0.9v as reset for the attiny. + +see instructables.com/id/ +Attiny85-as-a-StepDir-Stepper-Motor-Controller + +audio +RGB led + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Since Version 6.2.2 text objects can contain more than one line, +which will not be processed correctly with this version. + + +