From cf47a20e3d849c3f6706a82ef1796569b4997bad Mon Sep 17 00:00:00 2001 From: yoshco Date: Fri, 9 May 2014 16:40:58 +0300 Subject: [PATCH] ver05 friday session --- ATTAMI.sch | 918 +++++++++++++++++++++++------------------------------ 1 file changed, 406 insertions(+), 512 deletions(-) diff --git a/ATTAMI.sch b/ATTAMI.sch index b72ab83..c67bec0 100644 --- a/ATTAMI.sch +++ b/ATTAMI.sch @@ -8,7 +8,7 @@ - + @@ -23,19 +23,19 @@ - - - - - - - - - - - - - + + + + + + + + + + + + + @@ -44,8 +44,8 @@ - - + + @@ -53,16 +53,16 @@ - - - - - - - - - - + + + + + + + + + + @@ -87,13 +87,18 @@ + + + + + @@ -709,168 +714,6 @@ Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.<br&g - -Package for an SMT Micro-B connector. Digikey part #H11613-ND -*** Unproven*** - - - - - - - - - ->NAME ->VALUE - - -<h3>Micro B Right Angle through-hole PCB plug connector</h3> -<b>**Unproven**</b><br> -See digikey part #H11673TR-ND - - - - - - - - - - - - - - - ->Name ->Value - - -<h3>Micro B USB Plug Assembly - Straight Through-hole</h3> -<b>**UNPROVEN**</b><Br> -See Digikey part #H11497-ND - - - - - - - - - - - ->Name ->Value - - -<h3>USB Micro-B Plug Connector</h3> -Manufacturer part #: ZX80-B-5SA<br> -Manufacturer: Hirose<br><br> -<b>***Unproven***</b> (Passed 1:1 printout test though!) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->Name ->Value - - - - - - - ->NAME -+ -- - - -Small solder jumper with big paste layer so it will short during reflow. - - - - - - - - - - ->NAME ->VALUE - - - -Solder jumper, small, shorted with trace. No paste layer. Trace is cuttable. - - - - - - - - - ->NAME ->VALUE - - - - - - - - - - ->NAME ->VALUE - - - -Small solder jumper with no paste layer so it will open after reflow. - - - - - - - - ->NAME ->VALUE - @@ -1152,45 +995,6 @@ Manufacturer: Hirose<br><br> - - - - - ->NAME ->VALUE - - - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - - ->NAME ->VALUE - - - @@ -1599,126 +1403,6 @@ Standard schematic elements and footprints for 5mm, 3mm, 1206, and 0603 sized LE - -<h3>USB Micro-B Plug</h3> -Comes in a variety of packages. Check out Hirose's ZX-x0 line: http://www.hirose.co.jp/cataloge_hp/e24200011.pdf - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -<h3>Fabrick.it Coin Cell Holder</h3> -Coin cell holder for 24.5mm rechargable coin cell - - - - - - - - - - - - - - - - -<b>Solder Jumper</b> -Standard SMD solder jumper. Used to automate production. Two varients : Normally Open and Normally Closed are the same, but have different paste layers. NC will have a large amount of paste and should jumper during reflow. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - <b>Header 7</b> Standard 7-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... This footprint was designed to help hold the alignment of a through-hole component (i.e. 7-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is usually a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the header in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. @@ -1919,60 +1603,6 @@ Source: http://www.onsemi.co.jp .. LM317M-D.PDF - -<b>Solder Pads/Test Points</b><p> -<author>Created by librarian@cadsoft.de</author> - - -<b>SOLDER PAD</b><p> -drill 1.0 mm - - - - - - - - - - - - - - - ->NAME ->VALUE - - - - - - - ->NAME - - - - - -<b>SOLDER PAD</b><p> drill 1.0 mm, distributor Buerklin, 12H555 - - - - - - - - - - - - - - - - <b>Small Signal Transistors</b><p> Packages from :<br> @@ -2222,6 +1852,58 @@ www.irf.com<p> + +<b>PIN HEADER</b> + + + + +>NAME +>VALUE + + + + + + + + + +>NAME +>VALUE + + + + + +<p><b>Pin Headers</b><br/> +2 Pin, 0.1"/2.54mm pitch, SMT</p> + + + + +>NAME +>VALUE + + + + + + +>NAME +>VALUE + + + + + + +>NAME +>VALUE + + + + @@ -2235,6 +1917,17 @@ www.irf.com<p> + + + + + +>NAME +>VALUE + + + + @@ -2496,6 +2189,235 @@ www.irf.com<p> + +<b>PIN HEADER</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +SMT 6mm switch, EVQQ2 series +<p>http://www.ladyada.net/library/eagle</p> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +MICRO USB R/A-473460001 + + + + + + + + + + + + + + + + + + + + + + + + +PCB Front Edge +Conn. Front Interface +>Name +>Value + + + + +MICRO USB R/A-473460001 + + + + + + + + + +>Name +>Value + + + + +CONN RCPT 5POS MICRO USB R/A SMD + + + + + + + + + + + + + + + + + + + + + + + + @@ -2504,7 +2426,9 @@ www.irf.com<p> - + + + @@ -2519,15 +2443,10 @@ www.irf.com<p> - - - - - @@ -2536,9 +2455,6 @@ www.irf.com<p> - - - @@ -2555,6 +2471,10 @@ www.irf.com<p> + + + + @@ -2564,16 +2484,17 @@ www.irf.com<p> 1. U1 part # is NCP4626HSN050T1G see data sheet for package details 2. Vin, ECO and CE pins of U1 "NCP4626" should be connected. 3. U1 ground trace should be large enough for heat dissipation (also use some VIAs to transfer heat to the other side of the board). -4. C1 and C2 should be placed as close as possible to U1. +4. C1 should be placed as close as possible to U1. 5. C3 and C4 should be placed as close as possible to U2. Notes for the USER: -1. D3, D4, D7 and D8 are Blue and/or Green LEDs they will not light when using Coin Cell as power source. -2. In order to use Coin Cell (2.7 Volts) either install ATTINY85V or short circuit SJ1. -3. If SJ1 is shorted always remove the Coin Cell before connecting USB or V_BAT to the board. -4. When VCC is less than 5V change the system clock of the ATTINY85 to 8MHz or less. -TAMI-ATTINY-V04.sch 30-04-2014 21:52 +1. D3, D4, D7 and D8 are Blue and/or Green LEDs they might not light when using Vin <4V~ power source +2. When VCC is less than 5V change the system clock of the ATTINY85 to 8MHz or less (refer to datasheet of P163 speed figure 21-1) +3. we are refering to the ATtiny85V - low power/speed version . refer to following diff between versions: + ATtiny85V: 0 – 4 MHz @ 1.8 - 5.5V, 0 - 10 MHz @ 2.7 - 5.5V + ATtiny85: 0 – 10 MHz @ 2.7 - 5.5V, 0 - 20 MHz @ 4.5 - 5.5V +TAMI-ATTINY-V05.sch 09-05-2014 21:52 @@ -2605,20 +2526,12 @@ Notes for the USER: - - - - - - + + - - - - @@ -2636,13 +2549,6 @@ Notes for the USER: - - - - - - - @@ -2653,9 +2559,9 @@ Notes for the USER: - - - + + + @@ -2664,10 +2570,16 @@ Notes for the USER: - + - - + + + + + + + + @@ -2675,32 +2587,31 @@ Notes for the USER: - - + - + - - - - - - - + + - - + + + + + + + @@ -2720,9 +2631,6 @@ Notes for the USER: - - - @@ -2749,7 +2657,7 @@ Notes for the USER: - + @@ -2779,13 +2687,21 @@ Notes for the USER: - + + + + + + + + + + - - - + + @@ -2819,7 +2735,7 @@ Notes for the USER: - + @@ -2841,47 +2757,42 @@ Notes for the USER: - + - - - - - - - - - - - + + + + + + - + - - - - + + @@ -2892,68 +2803,44 @@ Notes for the USER: - + - - - - - - - - - - - - - - + @@ -2961,7 +2848,7 @@ Notes for the USER: - + @@ -2992,20 +2879,27 @@ Notes for the USER: - + - + + + + + + + + - +