<h3>SparkFun Electronics' preferred foot prints</h3> We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at www.sparkfun.com. Licensing: CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. Fits EIAJ packages (wide version of the SOIC-8). >VALUE >NAME Dual In Line >VALUE >NAME >NAME >VALUE >NAME >VALUE >Name >Value >Name >Value >Name >Value >NAME >VALUE >NAME >VALUE CAPACITOR chip >NAME >VALUE >Name >Value >Name >Value >NAME >VALUE CTZ3 Series land pattern for variable capacitor - CTZ3E-50C-W1-PF >NAME >VALUE <h3>CAP-PTH-SMALL-KIT</h3> Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571). Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. >Name >Value RESISTOR chip >NAME >VALUE >NAME >VALUE CAPACITOR chip >NAME >VALUE 1/6W Thru-hole Resistor - *UNPROVEN* >NAME >VALUE >NAME >VALUE 1/4W Resistor, 0.4" wide Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value 1/2W Resistor, 0.5" wide Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value 1W Resistor, 0.6" wide Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value 2W Resistor, 0.8" wide Yageo CFR series <a href="http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf">http://www.yageo.com/pdf/yageo/Leaded-R_CFR_2008.pdf</a> >Name >Value <h3>AXIAL-0.3-KIT</h3> Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes. Warning: This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. >Name >Value Small Outline Transistor >NAME >VALUE >NAME >VALUE >Value >Name >NAME >VALUE >NAME >VALUE >VALUE >NAME >VALUE Atmel ATTiny45 Capacitor Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. Resistor Basic schematic elements and footprints for 0603, 1206, and PTH resistors. SUPPLY SYMBOL Voltage Regulator LDO Standard 150mA LDO voltage regulator in SOT-23 layout. Micrel part MIC5205. BP (by-pass) pin is used to lower output noise with 470pF cap. <h2>microBuilder.eu Eagle Footprint Library</h2> Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at www.microBuilder.eu. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits! <h3>Obligatory Warning</h3> While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly! <h3>License</h3> This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions: THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. SMA Surface Mount Diode >NAME >VALUE >Name >Value SOT23 - Reflow soldering >NAME >VALUE SOD-523 (0.8x1.2mm) Source: http://www.rohm.com/products/databook/di/pdf/rb751s-40.pdf >NAME >VALUE SOD323 (2.5x1.2mm) >NAME >VALUE SOD-123 Source: http://www.diodes.com/datasheets/ds30139.pdf >NAME >VALUE >NAME >VALUE 3,0 1,0 2,0 3,0 PIN HEADER >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE PIN HEADER >NAME >VALUE Pin Headers 2 Pin, 0.1"/2.54mm pitch, SMT >NAME >VALUE Solder Jumper - Reflow >NAME >VALUE Solder Jumper - Wave >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE Diode <h3>SMA</h3> <table cellpadding="5" width="600"> <tr bgcolor="#DDDDDD"> <td>Model</td> <td>Volts</td> <td>Amps</td> <td>Type</td> <td>Vf</td> <td>Vr</td> <td>Digikey #</td> <td>Notes</td> </tr> <tr> <td>SSA34-E3</td> <td>40V</td> <td>3A</td> <td>Schottky</td> <td>480mV @ 3A</td> <td>200uA @ 40V</td> <td>SSA34-E3/61TGITR-ND</td> <td></td> </tr> <tr> <td>CDBA120-G</td> <td>20V</td> <td>1A</td> <td>Schottky</td> <td>500mV @ 1A</td> <td>500uA @ 20V</td> <td>641-1014-6-ND</td> <td>REEL</td> </tr> <tr> <td>MBRA210</td> <td>10V</td> <td>2A</td> <td>Schottky</td> <td>350mV @ 2A</td> <td>700uA @ 10V</td> <td>MBRA210LT3</td> <td></td> </tr> </table> <h3>SOD-123</h3> <table cellpadding="5" width="600"> <tr bgcolor="#DDDDDD"> <td>Model</td> <td>Volts</td> <td>Amps</td> <td>Type</td> <td>Vf</td> <td>Vr</td> <td>Order #</td> <td>Notes</td> </tr> <tr> <td>BAT54T1G</td> <td>30V</td> <td>200mA</td> <td>Schottky</td> <td>800mV @ 200mA</td> <td>2uA @ 25V</td> <td>BAT54T1GOSTR-ND</td> <td></td> </tr> <tr> <td>B0530W</td> <td>30V</td> <td>500mA</td> <td>Schottky</td> <td>430mV @ 500mA</td> <td>130uA @ 30V</td> <td>B0530W-FDICT-ND</td> <td>REEL</td> </tr> <tr> <td>MBR120</td> <td>1A</td> <td>20V</td> <td>Schottky</td> <td>340mV @ 1A</td> <td></td> <td>MBR120VLSFT1GOSCT-ND</td> <td></td> </tr> </table> <h3>SOD-323</h3> <table cellpadding="5" width="600"> <tr bgcolor="#DDDDDD"> <td>Model</td> <td>Volts</td> <td>Amps</td> <td>Type</td> <td>Vf</td> <td>Vr</td> <td>Order #</td> <td>Notes</td> </tr> <tr> <td>PMEG2005EJ</td> <td>20V</td> <td>500mA</td> <td>Schottky</td> <td>355mV @ 500mA</td> <td></td> <td>568-4110-1-ND</td> <td></td> </tr> <tr> <td>ZLLS410</td> <td>10V</td> <td>570mA</td> <td>Schottky</td> <td>380mV @ 570mA</td> <td></td> <td>ZLLS410CT-ND</td> <td></td> </tr> <tr> <td>1N4148WS</td> <td>75V</td> <td>150mA</td> <td>Silicon/Simple</td> <td>1V</td> <td></td> <td>1N4148WSFSCT-ND</td> <td>REEL</td> </tr> </table> <h3>SOD-523</h3> <table cellpadding="5" width="600"> <tr bgcolor="#DDDDDD"> <td>Model</td> <td>Volts</td> <td>Amps</td> <td>Type</td> <td>Vf</td> <td>Vr</td> <td>Order #</td> <td>Notes</td> </tr> <tr> <td>BAT54XV2</td> <td>30V</td> <td>200mA</td> <td>Schottky</td> <td>0.8V @ 100mA</td> <td></td> <td>BAT54XV2CT-ND</td> <td></td> </tr> <tr> <td>TB751S</td> <td>30V</td> <td>30mA</td> <td>Schottky</td> <td></td> <td></td> <td>RB751S-40TE61CT-ND</td> <td></td> </tr> </table> <h3>SOT23-R/W</h3>(R = Solder Paste/Reflow Ovens, W = Hand-Soldering) <table cellpadding="5" width="600"> <tr bgcolor="#DDDDDD"> <td>Model</td> <td>Volts</td> <td>Amps</td> <td>Type</td> <td>Vf</td> <td>Vr</td> <td>Order #</td> <td>Notes</td> </tr> <tr> <td>BAT54FILM</td> <td>40V</td> <td>300mA</td> <td>Schottky</td> <td></td> <td></td> <td>497-7162-1-ND</td> <td></td> </tr> </table> Mounting Hole For #2 screws (0.086"/2.18mm width, 0.094"/2.4mm hole) use 2.5mm PIN HEADER PIN HEADER SMD Solder JUMPER Solder the two pads together to create a connection, or remove the solder to break it. REFLOW - Use this footprint for solder paste and reflow ovens. WAVE - Use this footprint for hand-soldering (larger pads). CLOSED - Has a trace between the two pads to ensure it is closed by default. The trace needs to be cut to disable the jumper, and can be closed again by creating a solder bridge between the two pads. Dangerous Prototypes Standard PCB sizes http://dangerousprototypes.com >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE K >NAME >VALUE Light Emitting Diode <h3>SparkFun Electronics' preferred foot prints</h3> In this library you'll find anything that moves- switches, relays, buttons, potentiometers. Also, anything that goes on a board but isn't electrical in nature- screws, standoffs, etc. We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. Licensing: CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. OMRON SWITCH >NAME >NAME >Value >NAME >Value Sparkfun SKU# COM-08229 >NAME >VALUE >NAME >NAME >VALUE Various NO switches- pushbuttons, reed, etc >Name >Value >NAME >VALUE Frames for Sheet and Layout >DRAWING_NAME >LAST_DATE_TIME >SHEET Sheet: FRAME DIN A4, landscape with location and doc. field PIN HEADER >NAME >VALUE >NAME >VALUE >NAME >VALUE Pin header 1x1 for 0.1" spacing With round pins Notes: 1. D2 and D3 are Blue LEDs they might not light when using Vi_BAT <4V~ 2. When VCC is less than 5V change the system clock of the ATTINY85 to 8MHz or less (refer to datasheet of P163 speed figure 21-1) T.A.M.I hackerspace crew LICENSE: CERN OHL 1.7 Since Version 6.2.2 text objects can contain more than one line, which will not be processed correctly with this version.