>NAME >VALUE >NAME >VALUE 2,0 >NAME >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >DRAWING_NAME >LAST_DATE_TIME >SHEET Sheet: >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE <b>PIN HEADER</b> <b>PIN HEADER</b> <b>FRAME</b><p> DIN A4, landscape with location and doc. field <b>Mounting Hole</b> <p>For #2 screws (0.086"/2.18mm width, 0.094"/2.4mm hole) use 2.5mm</p> <b>SUPPLY SYMBOL</b> <b>Resistor</b> Basic schematic elements and footprints for 0603, 1206, and PTH resistors. Light Emitting Diode <b>Capacitor</b> Standard 0603 ceramic capacitor, and 0.1" leaded capacitor. more at github.com/telavivmakers/at-tami Notes: 1. D1 and D2 are Blue LEDs they might not light when using Vi_BAT <4V~ 2. When VCC is less than 5V change the system clock of the ATTINY85 to 8MHz or less - refer to the datasheet P163 Section 21-3 Speed T.A.M.I hackerspace crew LICENSE: CERN OHL 1.7 VCC (output) V_BAT (input) RESET/ADC0 PWM/ADC3 SCK/SCL/ADC1 PWM/ADC2 MISO/PWM AREF/MOSI/SDA/PWM on chip 4 5 6 7 2 3 1 8 (not on header) VCC this should only be used when VBAT is connected to via source between 0.3-8V Since Version 6.2.2 text objects can contain more than one line, which will not be processed correctly with this version.