a growing library for parts used in the ATtami project. more info at https://github.com/telavivmakers/at-tami>Name>Value*>NAME>VALUE<b>Small Outline Transistor</b>>NAME>VALUE<b>SOD323</b> (2.5x1.2mm)>NAME>VALUE>NAME>VALUE>NAME>VALUE2,0>NAME>VALUE>NAME>VALUE>NAME>VALUESparkfun SKU# COM-08229>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>DRAWING_NAME>LAST_DATE_TIME>SHEETSheet:>NAME>VALUE8-bit Microcontroller with In-System Programmable Flash<b>Voltage Regulator LDO</b>
Standard 150mA LDO voltage regulator in SOT-23 layout. Micrel part MIC5205. BP (by-pass) pin is used to lower output noise with 470pF cap.Schottky Diode<b>PIN HEADER</b><b>Resistor</b>
Basic schematic elements and footprints for 0603, 1206, and PTH resistors.<b>Mounting Hole</b>
<p>For #2 screws (0.086"/2.18mm width, 0.094"/2.4mm hole) use 2.5mm</p><b>SUPPLY SYMBOL</b><p><b>SMD Solder JUMPER</b></p>
<p>Solder the two pads together to create a connection, or remove the solder to break it.</p>
<b>REFLOW</b> - Use this footprint for solder paste and reflow ovens.<br/>
<b>WAVE</b> - Use this footprint for hand-soldering (larger pads).
<p><b>CLOSED</b> - Has a trace between the two pads to ensure it is closed by default. The trace needs to be cut to disable the jumper, and can be closed again by creating a solder bridge between the two pads.</p>Light Emitting Diode<b>Capacitor</b>
Standard 0603 ceramic capacitor, and 0.1" leaded capacitor.<b>PIN HEADER</b>Various NO switches- pushbuttons, reed, etc<b>FRAME</b><p>
DIN A4, landscape with location and doc. field<b>Pin header 1x1 for 0.1" spacing</b>
<p>
With round pinsNotes:
1. D1 and D2 are Blue LEDs they might not light when using Vi_BAT <4V~
2. When VCC is less than 5V change the system clock of the ATTINY85 to 8MHz or less (refer to the datasheet P163 Section 21-3 Speed)T.A.M.I hackerspace crew
LICENSE: CERN OHL 1.7VCC (output)V_BAT (input)Reset
Since Version 6.2.2 text objects can contain more than one line,
which will not be processed correctly with this version.