16 lines
999 B
Markdown
16 lines
999 B
Markdown
|
# Stepcraft GRBLizer
|
||
|
|
|
||
|
|
A GRBL compatible controller for use as a drop-in replacement for the SC100 USB standard controller deliverd with Stepcraft CNC machines. This Arduino Uno compatible controller is wired conforming the GRL v0.9+ standard. The controller can be used with the GRBL firmware and with EstlCAM.
|
||
|
|
|
||
|
|
## Features
|
||
|
|
- The PC is fully electrically isolated from the CNC machine (optional).
|
||
|
|
- All inputs protected with clamping diodes and resistors.
|
||
|
|
- Probe inputs have a 100 Ohm / 100nF low pass filter to suppress spurious triggering. (Filter values may be experimented with.)
|
||
|
|
- 3.5mm Jack for spindle / laser / hot-end control
|
||
|
|
- 3.5mm Jack input for 2 probes.
|
||
|
|
- Serial interface fed out the back (TTL, not protected). For people in a hurry: CP2102 and isolator ICs can be left unpopulated.
|
||
|
|
- Standard 6 pin ISP programming connector fed out the back (not protected).
|
||
|
|
- Some juper block for IO-config
|
||
|
|
|
||
|
|
Alvast een leuk plaatje:
|
||
|
|
|