yair/grbl
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

version 0.1

Browse Source
This commit is contained in:
Simen Svale Skogsrud
2009-01-25 00:48:56 +01:00
commit 9df29ad3b3
18 changed files with 1669 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
readme.txt Normal file
View File

@@ -0,0 +1,15 @@
Grbl - An embedded rs274/ngc (g-code) interpreter, cartesian bot controller, readout and exerciser
Inspired by the Arduino GCode Interpreter by Mike Ellery
Goals:
* Suitable for both milling and deposition fabrication
* Support GCode from common free and cheap CAM-packages right out of the box
* Optional support for a alphanumeric LCD readout, a joystick and a few buttons for program control
* Optional support for automated cutter length calibration when milling
* Support "headless" fabrication by buffering all code to SD-card or similar
Limitations:
* No support for Arduino software (but will run fine on an Arduino board if you program it with an ISP)
* Limited GCode-support. Focus on the kind of GCode produced by automated CAM tools. Leave human GCoders frustrated.