yair/grbl
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Added runtime configurable global settings with eeprom persitence

Browse Source
This commit is contained in:
Simen Svale Skogsrud
2010-03-07 20:29:18 +01:00
parent a6b8d73044
commit b8ba8a4231
13 changed files with 350 additions and 48 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
readme.txt
View File

@@ -1,4 +1,4 @@
Grbl - An embedded rs274/ngc (g-code) integrater interpreter and motion-controller for the Arduino/AVR328 microcontroller
Grbl - An embedded rs274/ngc (g-code) interpreter and motion-controller for the Arduino/AVR328 microcontroller
Goal: A no-compromise, high performance, low cost alternative to parallel-port based motion control for CNC milling
@@ -10,12 +10,12 @@ Status:
* Standards-compliant g-code arcs/circles fully supported
* Buffered, non blocking, asynchronous step generation so the rest of the system is free to process
g-code while the steppers are steppin'
* Configuration parameters stored in EEPROM and set via simple commands
* Tested on very few (two) CNC rigs
Pending:
* Battle hardening in the field
* Documentation and web-site
* Simpler configuration (w/o recompilation)
* Optional support for a alphanumeric LCD readout, a joystick and a few buttons for program control
* Support "headless" fabrication by buffering all code to SD-card or similar
* Easing of feed rate