Comments for documentation

examples/vga_levelmeter/Makefile

@@ -1,69 +0,0 @@
-#   make clean ... clean
-#   make all ... compile
-
-##############################################################################
-# Input files
-
-# ASM source files
-ASRC +=
-
-# C source files
-CSRC +=
-
-# C++ source files
-SRC += src/main.cpp
-SRC += img/repro1.cpp
-SRC += img/repro2.cpp
-SRC += img/repro3.cpp
-SRC += snd/test.cpp
-
-##############################################################################
-# Configuration
-
-# defines
-DEFINE += -DCFG_TUSB_DEBUG=0
-DEFINE += -DCFG_TUSB_MCU=OPT_MCU_RP2040
-DEFINE += -DCFG_TUSB_OS=OPT_OS_PICO
-DEFINE += -DPICO_BIT_OPS_PICO=1
-DEFINE += -DPICO_BOARD=\"pico\"
-DEFINE += -DPICO_BUILD=1
-DEFINE += -DPICO_CMAKE_BUILD_TYPE=\"Release\"
-DEFINE += -DPICO_COPY_TO_RAM=0
-DEFINE += -DPICO_CXX_ENABLE_EXCEPTIONS=0
-DEFINE += -DPICO_DIVIDER_HARDWARE=1
-DEFINE += -DPICO_DOUBLE_PICO=1
-DEFINE += -DPICO_FLOAT_PICO=1
-DEFINE += -DPICO_INT64_OPS_PICO=1
-DEFINE += -DPICO_MEM_OPS_PICO=1
-DEFINE += -DPICO_NO_FLASH=0
-DEFINE += -DPICO_NO_HARDWARE=0
-DEFINE += -DPICO_ON_DEVICE=1
-DEFINE += -DPICO_PRINTF_PICO=1
-DEFINE += -DPICO_PROGRAM_URL=\"https://github.com/raspberrypi/pico-examples\"
-DEFINE += -DPICO_TARGET_NAME=\"pico\"
-DEFINE += -DPICO_USE_BLOCKED_RAM=0
-DEFINE += -DNDEBUG
-
-# stdio output (select one option)
-#DEFINE += -DPICO_STDIO_UART=1
-#DEFINE += -DPICO_STDIO_SEMIHOSTING=1
-#DEFINE += -DPICO_STDIO_USB=1
-
-# How to connect UART to Pico:
-#                  +---USB---+
-# <-- UART0_TX GP0 |.1    40.|VBUS --- +5V power output to USB device
-# --> UART0_RX GP1 |.2    39.|VSYS ---|<|--- +5V power input
-# ---          GND |.3    38.| GND  K diode A
-#              GP2 |.4    37.| 3V3_EN
-#              GP3 |.5    36.| 3V3_OUT
-#                    ......
-#
-# USB/UART adaptor PL2303TA:
-#    red ......... +5V VSYS (39)
-#    black ....... GND (3)
-#    white RxD ... UART0_TX GP0 (1)
-#    green TxD ... UART0_RX GP1 (2)
-
-# Setup: 115200 Baud
-
-include ../Makefile.inc