Merge branch 'master' of git://git.denx.de/u-boot-atmel
This commit is contained in:
Tom Rini
255
include/configs/ma5d4evk.h
Normal file
255
include/configs/ma5d4evk.h
Normal file
@@ -0,0 +1,255 @@
|
||||
/*
|
||||
* DENX MA5D4 configuration
|
||||
* Copyright (C) 2015 Marek Vasut <marex@denx.de>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __MA5D4EVK_CONFIG_H__
|
||||
#define __MA5D4EVK_CONFIG_H__
|
||||
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
#define CONFIG_FIT
|
||||
|
||||
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
|
||||
|
||||
#include "at91-sama5_common.h"
|
||||
#undef CONFIG_BOOTARGS
|
||||
#define CONFIG_SYS_USE_SERIALFLASH 1
|
||||
|
||||
/*
|
||||
* U-Boot Commands
|
||||
*/
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_FAT_WRITE
|
||||
/*#define CONFIG_LCD*/
|
||||
|
||||
#define CONFIG_CMD_ASKENV
|
||||
#define CONFIG_CMD_CACHE
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_EXT4
|
||||
#define CONFIG_CMD_EXT4_WRITE
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_CMD_FS_GENERIC
|
||||
#define CONFIG_CMD_GREPENV
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_MMC
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_SF
|
||||
#define CONFIG_CMD_USB
|
||||
|
||||
/*
|
||||
* Memory configurations
|
||||
*/
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
|
||||
#define CONFIG_SYS_SDRAM_SIZE 0x10000000
|
||||
|
||||
#ifdef CONFIG_SPL_BUILD
|
||||
#define CONFIG_SYS_INIT_SP_ADDR 0x210000
|
||||
#else
|
||||
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Environment
|
||||
*/
|
||||
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
||||
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
|
||||
#define CONFIG_ENV_OFFSET 0x8000
|
||||
#define CONFIG_ENV_SIZE 0x4000
|
||||
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
|
||||
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
||||
#define CONFIG_ENV_SECT_SIZE 0x1000
|
||||
|
||||
/*
|
||||
* U-Boot general configurations
|
||||
*/
|
||||
#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
|
||||
|
||||
/*
|
||||
* Serial Driver
|
||||
*/
|
||||
#define CONFIG_ATMEL_USART
|
||||
#define CONFIG_USART_BASE ATMEL_BASE_USART0
|
||||
#define CONFIG_USART_ID ATMEL_ID_USART0
|
||||
|
||||
/*
|
||||
* Ethernet
|
||||
*/
|
||||
#ifdef CONFIG_CMD_NET
|
||||
#define CONFIG_MACB
|
||||
#define CONFIG_RMII
|
||||
#define CONFIG_NET_RETRY_COUNT 20
|
||||
#define CONFIG_MACB_SEARCH_PHY
|
||||
#define CONFIG_ARP_TIMEOUT 200UL
|
||||
#define CONFIG_IP_DEFRAG
|
||||
#endif
|
||||
|
||||
/*
|
||||
* LCD
|
||||
*/
|
||||
#ifdef CONFIG_LCD
|
||||
#define CONFIG_CMD_BMP
|
||||
#define CONFIG_BMP_16BPP
|
||||
#define CONFIG_BMP_24BPP
|
||||
#define CONFIG_BMP_32BPP
|
||||
#define LCD_BPP LCD_COLOR16
|
||||
#define LCD_OUTPUT_BPP 24
|
||||
#define CONFIG_ATMEL_HLCD
|
||||
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
||||
#endif
|
||||
|
||||
/*
|
||||
* SD/MMC
|
||||
*/
|
||||
#ifdef CONFIG_CMD_MMC
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_GENERIC_ATMEL_MCI
|
||||
#endif
|
||||
|
||||
/*
|
||||
* SPI NOR (boot memory)
|
||||
*/
|
||||
#ifdef CONFIG_CMD_SF
|
||||
#define CONFIG_ATMEL_SPI
|
||||
#define CONFIG_ATMEL_SPI0
|
||||
#define CONFIG_SPI_FLASH_ATMEL
|
||||
#define CONFIG_SF_DEFAULT_BUS 0
|
||||
#define CONFIG_SF_DEFAULT_CS 0
|
||||
#define CONFIG_SF_DEFAULT_SPEED 30000000
|
||||
#endif
|
||||
|
||||
/*
|
||||
* USB
|
||||
*/
|
||||
#ifdef CONFIG_CMD_USB
|
||||
#define CONFIG_USB_EHCI
|
||||
#define CONFIG_USB_EHCI_ATMEL
|
||||
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
|
||||
#define CONFIG_USB_STORAGE
|
||||
|
||||
/* USB device */
|
||||
#define CONFIG_USB_GADGET
|
||||
#define CONFIG_USB_GADGET_DUALSPEED
|
||||
#define CONFIG_USB_GADGET_ATMEL_USBA
|
||||
#define CONFIG_USB_ETHER
|
||||
#define CONFIG_USB_ETH_RNDIS
|
||||
#define CONFIG_USBNET_MANUFACTURER "DENX"
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Boot Linux
|
||||
*/
|
||||
#define CONFIG_CMDLINE_TAG
|
||||
#define CONFIG_INITRD_TAG
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
#define CONFIG_BOOTFILE "fitImage"
|
||||
#define CONFIG_BOOTARGS "console=ttyS3,115200"
|
||||
#define CONFIG_LOADADDR 0x20800000
|
||||
#define CONFIG_BOOTCOMMAND "run mmc_mmc"
|
||||
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||
#define CONFIG_OF_LIBFDT
|
||||
|
||||
/*
|
||||
* Extra Environments
|
||||
*/
|
||||
#define CONFIG_PREBOOT "run try_bootscript"
|
||||
#define CONFIG_HOSTNAME ma5d4evk
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"consdev=ttyS3\0" \
|
||||
"baudrate=115200\0" \
|
||||
"bootscript=boot.scr\0" \
|
||||
"bootdev=/dev/mmcblk1p1\0" \
|
||||
"bootpart=1:1\0" \
|
||||
"rootdev=/dev/mmcblk1p2\0" \
|
||||
"netdev=eth0\0" \
|
||||
"kernel_addr_r=0x22000000\0" \
|
||||
"update_spi_firmware_spl_addr=0x21000000\0" \
|
||||
"update_spi_firmware_spl_filename=boot.bin\0" \
|
||||
"update_spi_firmware_addr=0x22000000\0" \
|
||||
"update_spi_firmware_filename=u-boot.img\0" \
|
||||
"update_spi_firmware=" /* Update the SPI flash firmware */ \
|
||||
"if sf probe ; then " \
|
||||
"if tftp ${update_spi_firmware_spl_addr} " \
|
||||
"${update_spi_firmware_spl_filename} ; then " \
|
||||
"setenv update_spi_firmware_spl_filesize ${filesize} ; "\
|
||||
"if tftp ${update_spi_firmware_addr} " \
|
||||
"${update_spi_firmware_filename} ; then " \
|
||||
"setenv update_spi_firmware_filesize ${filesize} ; " \
|
||||
"sf update ${update_spi_firmware_spl_addr} 0x0 " \
|
||||
"${update_spi_firmware_spl_filesize} ; " \
|
||||
"sf update ${update_spi_firmware_addr} 0x10000 " \
|
||||
"${update_spi_firmware_filesize} ; " \
|
||||
"fi ; " \
|
||||
"fi ; " \
|
||||
"fi\0" \
|
||||
"addcons=" \
|
||||
"setenv bootargs ${bootargs} " \
|
||||
"console=${consdev},${baudrate}\0" \
|
||||
"addip=" \
|
||||
"setenv bootargs ${bootargs} " \
|
||||
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
|
||||
"${netmask}:${hostname}:${netdev}:off\0" \
|
||||
"addmisc=" \
|
||||
"setenv bootargs ${bootargs} ${miscargs}\0" \
|
||||
"addargs=run addcons addmisc\0" \
|
||||
"mmcload=" \
|
||||
"mmc rescan ; " \
|
||||
"load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0" \
|
||||
"netload=" \
|
||||
"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
|
||||
"miscargs=nohlt panic=1\0" \
|
||||
"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
|
||||
"nfsargs=" \
|
||||
"setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
|
||||
"mmc_mmc=" \
|
||||
"run mmcload mmcargs addargs ; " \
|
||||
"bootm ${kernel_addr_r}\0" \
|
||||
"mmc_nfs=" \
|
||||
"run mmcload nfsargs addip addargs ; " \
|
||||
"bootm ${kernel_addr_r}\0" \
|
||||
"net_mmc=" \
|
||||
"run netload mmcargs addargs ; " \
|
||||
"bootm ${kernel_addr_r}\0" \
|
||||
"net_nfs=" \
|
||||
"run netload nfsargs addip addargs ; " \
|
||||
"bootm ${kernel_addr_r}\0" \
|
||||
"try_bootscript=" \
|
||||
"mmc rescan;" \
|
||||
"if test -e mmc ${bootpart} ${bootscript} ; then " \
|
||||
"if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\
|
||||
"then ; " \
|
||||
"echo Running bootscript... ; " \
|
||||
"source ${kernel_addr_r} ; " \
|
||||
"fi ; " \
|
||||
"fi\0"
|
||||
/* SPL */
|
||||
#define CONFIG_SPL_FRAMEWORK
|
||||
#define CONFIG_SPL_TEXT_BASE 0x200000
|
||||
#define CONFIG_SPL_MAX_SIZE 0x10000
|
||||
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
|
||||
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
|
||||
#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
|
||||
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
|
||||
|
||||
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
||||
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
||||
#define CONFIG_SPL_GPIO_SUPPORT
|
||||
#define CONFIG_SPL_SERIAL_SUPPORT
|
||||
|
||||
#define CONFIG_SPL_BOARD_INIT
|
||||
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
|
||||
|
||||
#define CONFIG_SPL_SPI_SUPPORT
|
||||
#define CONFIG_SPL_SPI_FLASH_SUPPORT
|
||||
#define CONFIG_SPL_SPI_LOAD
|
||||
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
|
||||
|
||||
#endif /* __MA5D4EVK_CONFIG_H__ */
|
||||
@@ -49,10 +49,18 @@
|
||||
#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */
|
||||
#define CONFIG_DISPLAY_CPUINFO /* display CPU Info at startup */
|
||||
|
||||
/* We set the max number of command args high to avoid HUSH bugs. */
|
||||
#define CONFIG_SYS_MAXARGS 32
|
||||
|
||||
/* setting board specific options */
|
||||
# define CONFIG_MACH_TYPE MACH_TYPE_SMARTWEB
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_MACH_TYPE MACH_TYPE_SMARTWEB
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
#define CONFIG_ENV_OVERWRITE 1 /* Overwrite ethaddr / serial# */
|
||||
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
|
||||
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
#define CONFIG_SYS_AUTOLOAD "yes"
|
||||
#define CONFIG_RESET_TO_RETRY
|
||||
|
||||
/* The LED PINs */
|
||||
#define CONFIG_RED_LED AT91_PIN_PA9
|
||||
@@ -184,9 +192,7 @@
|
||||
/* General Boot Parameter */
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
#define CONFIG_BOOTCOMMAND "run flashboot"
|
||||
#define CONFIG_BOOT_RETRY_TIME 30
|
||||
#define CONFIG_SYS_CBSIZE 512
|
||||
#define CONFIG_SYS_MAXARGS 16
|
||||
#define CONFIG_SYS_PBSIZE \
|
||||
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
|
||||
167
include/configs/vinco.h
Normal file
167
include/configs/vinco.h
Normal file
@@ -0,0 +1,167 @@
|
||||
/*
|
||||
* Configuration settings for the VInCo platform.
|
||||
*
|
||||
* Based on the settings for the SAMA5-EK board
|
||||
* Copyright (C) 2014 Atmel
|
||||
* Bo Shen <voice.shen@atmel.com>
|
||||
* Copyright (C) 2015 Free Electrons
|
||||
* Gregory CLEMENT gregory.clement@free-electrons.com
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/* No NOR flash, this definition should be put before common header */
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
#include "at91-sama5_common.h"
|
||||
|
||||
/* The value in the common file is too far away for the VInCo platform */
|
||||
#ifdef CONFIG_SYS_TEXT_BASE
|
||||
#undef CONFIG_SYS_TEXT_BASE
|
||||
#endif
|
||||
#define CONFIG_SYS_TEXT_BASE 0x20f00000
|
||||
|
||||
/* serial console */
|
||||
#define CONFIG_ATMEL_USART
|
||||
#define CONFIG_USART_BASE ATMEL_BASE_USART3
|
||||
#define CONFIG_USART_ID ATMEL_ID_USART3
|
||||
|
||||
/* SDRAM */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
|
||||
#define CONFIG_SYS_SDRAM_SIZE 0x4000000
|
||||
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
|
||||
|
||||
/* SerialFlash */
|
||||
#define CONFIG_CMD_SF
|
||||
|
||||
#ifdef CONFIG_CMD_SF
|
||||
#define CONFIG_ATMEL_SPI
|
||||
#define CONFIG_ATMEL_SPI0
|
||||
#define CONFIG_SPI_FLASH_STMICRO
|
||||
#define CONFIG_SF_DEFAULT_BUS 0
|
||||
#define CONFIG_SF_DEFAULT_CS 0
|
||||
#define CONFIG_SF_DEFAULT_SPEED 50000000
|
||||
#define CONFIG_ENV_SPI_MAX_HZ 50000000
|
||||
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
|
||||
#define CONFIG_ENV_SPI_MODE (SPI_MODE_0)
|
||||
#endif
|
||||
|
||||
|
||||
/* MMC */
|
||||
#define CONFIG_CMD_MMC
|
||||
|
||||
#ifdef CONFIG_CMD_MMC
|
||||
#define CONFIG_SUPPORT_EMMC_BOOT
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_GENERIC_ATMEL_MCI
|
||||
#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1
|
||||
#define CONFIG_SYS_MMC_CLK_OD 500000
|
||||
|
||||
/* For generating MMC partitions */
|
||||
#define CONFIG_PARTITION_UUIDS
|
||||
#define CONFIG_RANDOM_UUID
|
||||
#define CONFIG_EFI_PARTITION
|
||||
#define CONFIG_CMD_GPT
|
||||
|
||||
#endif
|
||||
|
||||
/* USB */
|
||||
#define CONFIG_CMD_USB
|
||||
|
||||
#ifdef CONFIG_CMD_USB
|
||||
#define CONFIG_USB_EHCI
|
||||
#define CONFIG_USB_EHCI_ATMEL
|
||||
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
|
||||
#define CONFIG_USB_STORAGE
|
||||
#endif
|
||||
|
||||
/* USB device */
|
||||
#define CONFIG_USB_GADGET
|
||||
#define CONFIG_USB_GADGET_DUALSPEED
|
||||
#define CONFIG_USB_GADGET_ATMEL_USBA
|
||||
#define CONFIG_USB_ETHER
|
||||
#define CONFIG_USB_ETH_RNDIS
|
||||
#define CONFIG_USBNET_MANUFACTURER "L+G VInCo"
|
||||
|
||||
#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#endif
|
||||
|
||||
/* Ethernet Hardware */
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_PHY_SMSC
|
||||
#define CONFIG_MACB
|
||||
#define CONFIG_RMII
|
||||
#define CONFIG_NET_RETRY_COUNT 20
|
||||
#define CONFIG_MACB_SEARCH_PHY
|
||||
|
||||
|
||||
#define CONFIG_USB_HOST_ETHER
|
||||
#define CONFIG_USB_ETHER_SMSC95XX
|
||||
#define CONFIG_USB_ETHER_RNDIS
|
||||
|
||||
|
||||
#ifdef CONFIG_SYS_USE_SERIALFLASH
|
||||
/* bootstrap + u-boot + env + linux in serial flash */
|
||||
#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
|
||||
#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
|
||||
/* Use our own mapping for the VInCo platform */
|
||||
#undef CONFIG_ENV_OFFSET
|
||||
#undef CONFIG_ENV_SIZE
|
||||
|
||||
#define CONFIG_ENV_OFFSET 0x10000
|
||||
#define CONFIG_ENV_SIZE 0x10000
|
||||
|
||||
/* Update the bootcommand according to our mapping for the VInCo platform */
|
||||
#undef CONFIG_BOOTCOMMAND
|
||||
#define CONFIG_BOOTCOMMAND "mmc dev 0 0;" \
|
||||
"mmc read ${loadaddr} ${k_offset} ${k_blksize};" \
|
||||
"mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};" \
|
||||
"bootz ${loadaddr} - ${oftaddr}"
|
||||
|
||||
#undef CONFIG_BOOTARGS
|
||||
#define CONFIG_BOOTARGS "console=ttyS0,115200 earlyprintk rw root=/dev/mmcblk0p2 rootfstype=ext4 rootwait quiet lpj=1990656"
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"kernel_start=0x20000\0" \
|
||||
"kernel_size=0x800000\0" \
|
||||
"mmcblksize=0x200\0" \
|
||||
"oftaddr=0x21000000\0" \
|
||||
"loadaddr=0x22000000\0" \
|
||||
"update_uboot=tftp ${loadaddr} u-boot.bin;sf probe 0;" \
|
||||
"sf erase 0x20000 0x4B000; sf write ${loadaddr} 0x20000 0x4B000\0" \
|
||||
"create_partition=setexpr dtb_start ${kernel_start} + 0x400000;" \
|
||||
"setexpr rootfs_start ${kernel_start} + ${kernel_size};" \
|
||||
"setenv partitions 'name=kernel,size=${kernel_size}," \
|
||||
"start=${kernel_start};name=rootfs,size=-';" \
|
||||
"gpt write mmc 0 ${partitions} \0"\
|
||||
"f2blk_size=setexpr fileblksize ${filesize} / ${mmcblksize};" \
|
||||
"setexpr fileblksize ${fileblksize} + 1\0" \
|
||||
"store_kernel=tftp ${loadaddr} zImage; run f2blk_size;" \
|
||||
"setexpr k_blksize ${fileblksize};" \
|
||||
"setexpr k_offset ${kernel_start} / ${mmcblksize};" \
|
||||
"mmc write ${fileaddr} ${k_offset} ${fileblksize}\0" \
|
||||
"store_dtb=tftp ${loadaddr} at91-vinco.dtb; run f2blk_size;" \
|
||||
"setexpr dtb_blksize ${fileblksize};" \
|
||||
"setexpr dtb_offset ${dtb_start} / ${mmcblksize};" \
|
||||
"mmc write ${fileaddr} ${dtb_offset} ${fileblksize}\0" \
|
||||
"store_rootfs=tftp ${loadaddr} vinco-gateway-image-vinco.ext4;" \
|
||||
"setexpr rootfs_offset ${rootfs_start} / ${mmcblksize};" \
|
||||
"mmc write ${fileaddr} ${rootfs_offset} ${fileblksize}\0" \
|
||||
"bootdelay=0\0"
|
||||
|
||||
#endif
|
||||
#define CONFIG_ZERO_BOOTDELAY_CHECK
|
||||
|
||||
#endif
|
||||
Reference in New Issue
Block a user