Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

include/configs/ls1021aqds.h

@@ -70,6 +70,11 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_HAS_SERDES
 
 #define CONFIG_FSL_CAAM			/* Enable CAAM */
+
+#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI)
+#define CONFIG_U_QE
+#endif
+
 /*
  * IFC Definitions
  */
@@ -110,6 +115,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_FLASH_QUIET_TEST
 #define CONFIG_FLASH_SHOW_PROGRESS	45
 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+#define CONFIG_SYS_WRITE_SWAPPED_DATA
 
 #define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
 #define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
@@ -273,6 +279,23 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_ESDHC
 #define CONFIG_GENERIC_MMC
 
+/*
+ * USB
+ */
+#define CONFIG_HAS_FSL_DR_USB
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+#define CONFIG_USB_EHCI
+
+#ifdef CONFIG_USB_EHCI
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_CMD_EXT2
+#endif
+#endif
+
 /*
  * eTSEC
  */
@@ -332,6 +355,8 @@ unsigned long get_board_ddr_clk(void);
 
 #define CONFIG_BOOTDELAY		3
 
+#define CONFIG_SYS_QE_FW_ADDR     0x67f40000
+
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
 	"fdt_high=0xcfffffff\0"		\

include/configs/ls1021atwr.h

@@ -50,6 +50,10 @@
 
 #define CONFIG_FSL_CAAM			/* Enable CAAM */
 
+#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI)
+#define CONFIG_U_QE
+#endif
+
 /*
  * IFC Definitions
  */
@@ -95,6 +99,7 @@
 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE_PHYS }
 
 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+#define CONFIG_SYS_WRITE_SWAPPED_DATA
 
 /* CPLD */
 
@@ -156,6 +161,17 @@
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 
+/* EEPROM */
+#ifndef CONFIG_SD_BOOT
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM		1
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x53
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+#endif
+
 /*
  * MMC
  */
@@ -274,6 +290,8 @@
 
 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 
+#define CONFIG_SYS_QE_FW_ADDR     0x67f40000
+
 /*
  * Environment
  */

include/fsl_usb.h

@@ -85,4 +85,81 @@ struct ccsr_usb_phy {
 #define CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK 0x07
 #endif
 
+/* USB Erratum Checking code */
+#ifdef CONFIG_PPC
+static inline bool has_erratum_a006261(void)
+{
+	u32 svr = get_svr();
+	u32 soc = SVR_SOC_VER(svr);
+
+	switch (soc) {
+	case SVR_P1010:
+		return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0);
+	case SVR_P2041:
+	case SVR_P2040:
+		return IS_SVR_REV(svr, 1, 0) ||
+			IS_SVR_REV(svr, 1, 1) || IS_SVR_REV(svr, 2, 1);
+	case SVR_P3041:
+		return IS_SVR_REV(svr, 1, 0) ||
+			IS_SVR_REV(svr, 1, 1) ||
+			IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 2, 1);
+	case SVR_P5010:
+	case SVR_P5020:
+	case SVR_P5021:
+		return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0);
+	case SVR_T4240:
+	case SVR_T4160:
+	case SVR_T4080:
+		return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0);
+	case SVR_T1040:
+		return IS_SVR_REV(svr, 1, 0);
+	case SVR_T2080:
+	case SVR_T2081:
+		return IS_SVR_REV(svr, 1, 0);
+	case SVR_P5040:
+		return IS_SVR_REV(svr, 1, 0);
+	}
+
+	return false;
+}
+
+static inline bool has_erratum_a007075(void)
+{
+	u32 svr = get_svr();
+	u32 soc = SVR_SOC_VER(svr);
+
+	switch (soc) {
+	case SVR_B4860:
+	case SVR_B4420:
+		return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0);
+	case SVR_P1010:
+		return IS_SVR_REV(svr, 1, 0);
+	case SVR_P4080:
+		return IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 3, 0);
+	}
+	return false;
+}
+
+static inline bool has_erratum_a007798(void)
+{
+	return SVR_SOC_VER(get_svr()) == SVR_T4240 &&
+		IS_SVR_REV(get_svr(), 2, 0);
+}
+#else
+static inline bool has_erratum_a006261(void)
+{
+	return false;
+}
+
+static inline bool has_erratum_a007075(void)
+{
+	return false;
+}
+
+static inline bool has_erratum_a007798(void)
+{
+	return false;
+}
+
+#endif
 #endif /*_ASM_FSL_USB_H_ */

include/usb/ehci-fsl.h

@@ -163,6 +163,9 @@
 #elif defined(CONFIG_MPC512X)
 #define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC512x_USB1_ADDR
 #define CONFIG_SYS_FSL_USB2_ADDR	0
+#elif defined(CONFIG_LS102XA)
+#define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_LS102XA_USB1_ADDR
+#define CONFIG_SYS_FSL_USB2_ADDR        0
 #endif
 
 /*