yair/u-boot-tk1-som
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ppc4xx: remove HUB405 board

Browse Source 
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
This commit is contained in:
Matthias Fuchs
2015-01-12 22:47:23 +01:00
committed by Tom Rini
parent 843125daeb
commit e434d5d729
9 changed files with 1 additions and 679 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
board/esd/hub405/Kconfig
View File

@@ -1,12 +0,0 @@
if TARGET_HUB405
config SYS_BOARD
default "hub405"
config SYS_VENDOR
default "esd"
config SYS_CONFIG_NAME
default "HUB405"
endif

6
board/esd/hub405/MAINTAINERS
View File

@@ -1,6 +0,0 @@
HUB405 BOARD
M: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
S: Maintained
F: board/esd/hub405/
F: include/configs/HUB405.h
F: configs/HUB405_defconfig

10
board/esd/hub405/Makefile
View File

@@ -1,10 +0,0 @@
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y = hub405.o flash.o \
../common/misc.o \
../common/esd405ep_nand.o \

85
board/esd/hub405/flash.c
View File

@@ -1,85 +0,0 @@
/*
* (C) Copyright 2001
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/ppc4xx.h>
#include <asm/processor.h>
/*
* include common flash code (for esd boards)
*/
#include "../common/flash.c"
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size (vu_long * addr, flash_info_t * info);
static void flash_get_offsets (ulong base, flash_info_t * info);
/*-----------------------------------------------------------------------
*/
unsigned long flash_init (void)
{
unsigned long size_b0;
int i;
uint pbcr;
unsigned long base_b0;
int size_val = 0;
/* Init: no FLASHes known */
for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* Static FLASH Bank configuration here - FIXME XXX */
size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
size_b0, size_b0<<20);
}
/* Setup offsets */
flash_get_offsets (-size_b0, &flash_info[0]);
/* Re-do sizing to get full correct info */
mtdcr(EBC0_CFGADDR, PB0CR);
pbcr = mfdcr(EBC0_CFGDATA);
mtdcr(EBC0_CFGADDR, PB0CR);
base_b0 = -size_b0;
switch (size_b0) {
case 1 << 20:
size_val = 0;
break;
case 2 << 20:
size_val = 1;
break;
case 4 << 20:
size_val = 2;
break;
case 8 << 20:
size_val = 3;
break;
case 16 << 20:
size_val = 4;
break;
}
pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
mtdcr(EBC0_CFGDATA, pbcr);
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
-CONFIG_SYS_MONITOR_LEN,
0xffffffff,
&flash_info[0]);
flash_info[0].size = size_b0;
return (size_b0);
}

208
board/esd/hub405/hub405.c
View File

@@ -1,208 +0,0 @@
/*
* (C) Copyright 2001-2003
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <command.h>
#include <malloc.h>
DECLARE_GLOBAL_DATA_PTR;
extern void lxt971_no_sleep(void);
int board_revision(void)
{
unsigned long osrl_reg;
unsigned long isr1l_reg;
unsigned long tcr_reg;
unsigned long value;
/*
* Get version of HUB405 board from GPIO's
*/
/*
* Setup GPIO pin(s) (IRQ6/GPIO23)
*/
osrl_reg = in_be32((void *)GPIO0_OSRH);
isr1l_reg = in_be32((void *)GPIO0_ISR1H);
tcr_reg = in_be32((void *)GPIO0_TCR);
out_be32((void *)GPIO0_OSRH, osrl_reg & ~0x00030000); /* output select */
out_be32((void *)GPIO0_ISR1H, isr1l_reg | 0x00030000); /* input select */
out_be32((void *)GPIO0_TCR, tcr_reg & ~0x00000100); /* select input */
udelay(1000); /* wait some time before reading input */
value = in_be32((void *)GPIO0_IR) & 0x00000100; /* get config bits */
/*
* Restore GPIO settings
*/
out_be32((void *)GPIO0_OSRH, osrl_reg); /* output select */
out_be32((void *)GPIO0_ISR1H, isr1l_reg); /* input select */
out_be32((void *)GPIO0_TCR, tcr_reg); /* enable output driver for outputs */
if (value & 0x00000100) {
/* Revision 1.1 or 1.2 detected */
return 1;
}
/* Revision 1.0 */
return 0;
}
int board_early_init_f (void)
{
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
* IRQ 16 405GP internally generated; active low; level sensitive
* IRQ 17-24 RESERVED
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
* IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
* IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
* IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
* IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
mtdcr(UIC0ER, 0x00000000); /* disable all ints */
mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
mtdcr(UIC0PR, 0xFFFFFF9F); /* set int polarities */
mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
*/
mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
return 0;
}
#define LED_REG (DUART0_BA + 0x20)
int misc_init_r (void)
{
unsigned long val;
int delay, flashcnt;
char *str;
char hw_rev[4];
/*
* Enable interrupts in exar duart mcr[3]
*/
out_8((void *)(DUART0_BA + 4), 0x08);
out_8((void *)(DUART1_BA + 4), 0x08);
out_8((void *)(DUART2_BA + 4), 0x08);
out_8((void *)(DUART3_BA + 4), 0x08);
/*
* Set RS232/RS422 control (RS232 = high on GPIO)
*/
val = in_be32((void *)GPIO0_OR);
val &= ~(CONFIG_SYS_UART2_RS232 | CONFIG_SYS_UART3_RS232 |
CONFIG_SYS_UART4_RS232 | CONFIG_SYS_UART5_RS232);
str = getenv("phys0");
if (!str || (str && (str[0] == '0')))
val |= CONFIG_SYS_UART2_RS232;
str = getenv("phys1");
if (!str || (str && (str[0] == '0')))
val |= CONFIG_SYS_UART3_RS232;
str = getenv("phys2");
if (!str || (str && (str[0] == '0')))
val |= CONFIG_SYS_UART4_RS232;
str = getenv("phys3");
if (!str || (str && (str[0] == '0')))
val |= CONFIG_SYS_UART5_RS232;
out_be32((void *)GPIO0_OR, val);
/*
* check board type and setup AP power
*/
str = getenv("bd_type"); /* this is only set on non prototype hardware */
if (str != NULL) {
if ((strcmp(str, "swch405") == 0) || ((!strcmp(str, "hub405") && (gd->board_type >= 1)))) {
unsigned char led_reg_default = 0;
str = getenv("ap_pwr");
if (!str || (str && (str[0] == '1')))
led_reg_default = 0x04 | 0x02 ; /* U2_LED | AP_PWR */
/*
* Flash LEDs
*/
for (flashcnt = 0; flashcnt < 3; flashcnt++) {
/* LED_A..D off */
out_8((void *)LED_REG, led_reg_default);
for (delay = 0; delay < 100; delay++)
udelay(1000);
/* LED_A..D on */
out_8((void *)LED_REG, led_reg_default | 0xf0);
for (delay = 0; delay < 50; delay++)
udelay(1000);
}
out_8((void *)LED_REG, led_reg_default);
}
}
/*
* Reset external DUARTs
*/
out_be32((void *)GPIO0_OR,
in_be32((void *)GPIO0_OR) | CONFIG_SYS_DUART_RST); /* set reset to high */
udelay(10); /* wait 10us */
out_be32((void *)GPIO0_OR,
in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_DUART_RST); /* set reset to low */
udelay(1000); /* wait 1ms */
/*
* Store hardware revision in environment for further processing
*/
sprintf(hw_rev, "1.%ld", gd->board_type);
setenv("hw_rev", hw_rev);
return (0);
}
/*
* Check Board Identity:
*/
int checkboard (void)
{
char str[64];
int i = getenv_f("serial#", str, sizeof(str));
puts ("Board: ");
if (i == -1) {
puts ("### No HW ID - assuming HUB405");
} else {
puts(str);
}
if (getenv_f("bd_type", str, sizeof(str)) != -1) {
printf(" (%s", str);
} else {
puts(" (Missing bd_type!");
}
gd->board_type = board_revision();
printf(", Rev 1.%ld)\n", gd->board_type);
/*
* Disable sleep mode in LXT971
*/
lxt971_no_sleep();
return 0;
}