254887a57e
T2081 QDS is a high-performance computing evaluation, development and
test platform supporting the T2081 QorIQ Power Architecture processor.
T2081QDS board Overview
-----------------------
- T2081 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
- 2MB shared L2 and 512KB L3 CoreNet platform cache (CPC)
- CoreNet fabric supporting coherent and noncoherent transactions with
prioritization and bandwidth allocation
- 32-/64-bit DDR3/DDR3LP SDRAM memory controller with ECC and interleaving
- Ethernet interfaces:
- Two on-board 10M/100M/1G bps RGMII ports
- Two 10Gbps XFI with on-board SFP+ cage
- 1Gbps/2.5Gbps SGMII Riser card
- 10Gbps XAUI Riser card
- Accelerator:
- DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
- SerDes:
- 8 lanes up to 10.3125GHz
- Supports SGMII, HiGig, XFI, XAUI and Aurora debug,
- IFC:
- 512MB NOR Flash, 2GB NAND Flash, PromJet debug port and Qixis FPGA
- eSPI:
- Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
- USB:
- Two USB2.0 ports with internal PHY (one Type-A + one micro Type mini-AB)
- PCIe:
- Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
- eSDHC:
- Supports various SD/SDHC/SDXC/eMMC devices with adapter cards and
voltage translators
- I2C:
- Four I2C controllers.
- UART:
- Dual 4-pins UART serial ports
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
42 lines
906 B
INI
42 lines
906 B
INI
#
|
|
# Copyright 2013 Freescale Semiconductor, Inc.
|
|
#
|
|
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
# Refer doc/README.pblimage for more details about how-to configure
|
|
# and create PBL boot image
|
|
#
|
|
|
|
#PBI commands
|
|
#Initialize CPC1
|
|
09010000 00200400
|
|
09138000 00000000
|
|
091380c0 00000100
|
|
#512KB SRAM
|
|
09010100 00000000
|
|
09010104 fff80009
|
|
09010f00 08000000
|
|
#enable CPC1
|
|
09010000 80000000
|
|
#Configure LAW for CPC1
|
|
09000d00 00000000
|
|
09000d04 fff80000
|
|
09000d08 81000012
|
|
#Initialize eSPI controller, default configuration is slow for eSPI to
|
|
#load data, this configuration comes from u-boot eSPI driver.
|
|
09110000 80000403
|
|
09110020 2d170008
|
|
09110024 00100008
|
|
09110028 00100008
|
|
0911002c 00100008
|
|
#Errata for slowing down the MDC clock to make it <= 2.5 MHZ
|
|
094fc030 00008148
|
|
094fd030 00008148
|
|
#Configure alternate space
|
|
09000010 00000000
|
|
09000014 ff000000
|
|
09000018 81000000
|
|
#Flush PBL data
|
|
09138000 00000000
|
|
091380c0 00000000
|