Files
u-boot-tk1-som/board
Peng Fan 0d7cdc2abf imx: mx6ulevk: change QSPI PAD DSE to 120ohm
The current pad DSE for QSPI is 60ohm. This setting cause
too strong drive to clock and data signals. Need to change
the DSE to 120ohm for better signal quality.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2016-06-18 10:29:18 +02:00
..
2016-03-15 15:13:04 -04:00
2016-05-02 18:37:09 -04:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2015-09-11 17:12:57 -04:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2015-11-12 17:38:08 +01:00
2016-04-01 17:18:10 -04:00
2016-02-06 12:00:59 +01:00
2016-06-06 13:39:13 -04:00
2015-09-07 13:41:04 +02:00
2016-05-31 09:38:11 +02:00
2016-02-06 12:00:59 +01:00
2016-02-20 21:40:02 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-02-06 12:00:59 +01:00
2016-05-02 18:37:09 -04:00
2016-02-06 12:00:59 +01:00
2016-03-26 14:16:12 +01:00
2016-03-27 09:13:01 -04:00