yair/u-boot-tk1-som
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
1c69a51cc35b6ade8df7c0309f2a2f2f5d493e9d
u-boot-tk1-som/include/configs
History
Alison Wang 1c69a51cc3 arm: ls102xa: Adjust the load address of U-Boot for NOR boot 
The original load address of U-Boot is 0x67f80000. The address
space of NOR flash is 0x60000000 to 0x67ffffff. It will cause
the size of u-boot couldn't be larger than 512K. As more features
are supported in u-boot, the size of u-boot is larger than 512K.

To fix this issue, the load address of U-Boot for NOR boot is
adjusted to 0x60100000.

In RCW, the PBI command needs to change as follows:
 .pbi
-write 0xee0200, 0x67f80000
+write 0xee0200, 0x60100000
 .end

Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-05-20 10:33:52 -07:00
..
km
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
manroland
powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition
2014-01-24 16:59:21 -05:00
a3m071.h
powerpc: a3m071: remove redundant CONFIG_SPL_* defines
2014-12-08 09:35:43 -05:00
a4m072.h
powerpc: mpc52xx: a4m072: Convert to generic board
2014-11-19 13:07:21 +01:00
ac14xx.h
powerpc: ac14xx: convert to generic board
2014-10-27 14:35:54 +01:00
acadia.h
ppc4xx: Remove 4xx NAND booting support
2014-03-07 10:59:06 -05:00
adp-ag101.h
configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE
2014-02-19 11:10:05 -05:00
adp-ag101p.h
configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE
2014-02-19 11:10:05 -05:00
adp-ag102.h
configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE
2014-02-19 11:10:05 -05:00
alpr.h
fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK
2014-05-20 15:23:46 +02:00
alt.h
arm: rmobile: alt: Add support SDHI
2015-02-25 13:13:38 +09:00
am43xx_evm.h
ti: am335x/am437x/omap5 devices: Unify network environment variables
2015-05-08 17:24:16 -04:00
am335x_evm.h
ti: am335x/am437x/omap5 devices: Unify network environment variables
2015-05-08 17:24:16 -04:00
am335x_igep0033.h
AM335x: igep0033: Convert to generic board and use ti_am335x_common.h.
2014-09-04 13:06:00 -04:00
am3517_crane.h
ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
2015-03-13 09:29:24 -04:00
am3517_evm.h
ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
2015-03-13 09:29:24 -04:00
amcc-common.h
kconfig: Move REGEX to Kconfig
2015-05-10 09:59:38 -04:00
amcore.h
m68k: add architecture-specific u-boot.lds
2015-04-23 14:56:07 -04:00
ap325rxa.h
sh: sh4: remove CONFIG_SH4 definition from board config
2014-01-08 14:47:40 +09:00
ap_sh4a_4a.h
configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE
2014-02-19 11:10:05 -05:00
apalis_t30.h
apalis/colibri_t30: add misc cmds increase buf sizes and max args
2015-03-04 10:09:02 -07:00
apf27.h
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
apx4devkit.h
Merge git://git.denx.de/u-boot-arm
2013-07-31 11:30:38 +02:00
arcangel4.h
arc: move SYS_MONITOR_BASE setup in Konfig
2015-02-09 16:41:20 +03:00
aria.h
powerpc: aria: convert to generic board
2014-10-27 14:35:54 +01:00
aristainetos.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
armadillo-800eva.h
ARM: remove CONFIG_ARMV7 defines
2014-11-20 11:28:24 -05:00
arndale.h
arndale: config: disable max77686 support
2015-01-29 17:09:59 -07:00
aspenite.h
arm: aspenite: convert to generic board
2015-03-05 22:08:59 +01:00
astro_mcf5373l.h
m68k: add architecture-specific u-boot.lds
2015-04-23 14:56:07 -04:00
at91-sama5_common.h
ARM: at91: trival: fix typo for the nand partition name
2015-05-13 13:01:28 +02:00
at91rm9200ek.h
ARM: at91 series: convert to generic board
2014-11-17 08:47:15 -05:00
at91sam9m10g45ek.h
ARM: atmel: at91sam9m10g45ek: enable spl support
2015-04-01 01:04:30 +02:00
at91sam9n12ek.h
ARM: atmel: at91sam9n12ek: enable spl support
2015-04-01 01:04:31 +02:00
at91sam9rlek.h
ARM: at91: trival: fix typo for the nand partition name
2015-05-13 13:01:28 +02:00
at91sam9x5ek.h
ARM: atmel: at91sam9x5ek: enable spl support
2015-04-01 01:04:31 +02:00
at91sam9260ek.h
ARM: at91: mmc portA support is only for at91sam9g20ek_2mmc board
2015-02-07 23:42:58 +01:00
at91sam9261ek.h
spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header
2014-11-17 08:47:16 -05:00
at91sam9263ek.h
spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header
2014-11-17 08:47:16 -05:00
atngw100.h
avr32: use dlmalloc for DMA buffers
2015-02-17 22:52:39 +01:00
atngw100mkii.h
atngwmkii: convert to generic board
2015-03-02 08:49:48 -05:00
atstk1002.h
atstk1002: enable generic board
2015-02-17 22:54:41 +01:00
atstk1003.h
avr32: move CONFIG_AVR32 definition to arch/avr32/config.mk
2014-01-24 16:59:07 -05:00
atstk1004.h
avr32: move CONFIG_AVR32 definition to arch/avr32/config.mk
2014-01-24 16:59:07 -05:00
atstk1006.h
avr32: use dlmalloc for DMA buffers
2015-02-17 22:52:39 +01:00
axs101.h
Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig
2015-04-18 11:11:36 -06:00
B4860QDS.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
balloon3.h
pxa: balloon3/colibri_pxa270: fix environment optionally being nowhere
2015-03-02 10:59:50 +01:00
bamboo.h
ppc4xx: Remove 4xx NAND booting support
2014-03-07 10:59:06 -05:00
bav335x.h
Adding Support for BAV335x boards
2015-03-05 20:13:21 -05:00
bcm28155_ap.h
ARM: remove CONFIG_ARMV7 defines
2014-11-20 11:28:24 -05:00
bcm_ep_board.h
ARM: remove CONFIG_ARMV7 defines
2014-11-20 11:28:24 -05:00
bct-brettl2.h
bfin: make env offset sector aligned for bct-brettl2 and ibf-dsp561 boards
2015-01-16 13:31:35 +08:00
beagle_x15.h
beagle_x15: increase phy autoneg timeout
2015-03-13 09:29:36 -04:00
beaver.h
ARM: tegra: move common config defines centrally
2015-03-04 10:08:56 -07:00
bf506f-ezkit.h
kconfig: move CONFIG_CMD_IMPORTENV to Kconfig
2014-09-24 18:30:29 -04:00
bf518f-ezbrd.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
bf525-ucr2.h
blackfin: Add missing macro CONFIG_BFIN_SERIAL
2013-12-06 16:06:51 +08:00
bf526-ezbrd.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
bf527-ad7160-eval.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
bf527-ezkit.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
bf527-sdp.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
bf533-ezkit.h
kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig
2014-09-24 18:30:28 -04:00
bf533-stamp.h
kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig
2014-09-24 18:30:28 -04:00
bf537-minotaur.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
bf537-pnav.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
bf537-srv1.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
bf537-stamp.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
bf538f-ezkit.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
bf548-ezkit.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
bf561-acvilon.h
kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig
2014-09-24 18:30:28 -04:00
bf561-ezkit.h
kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig
2014-09-24 18:30:28 -04:00
bf609-ezkit.h
Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig
2015-04-18 11:11:36 -06:00
bfin_adi_common.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
bg0900.h
ARM: mxs: Add PPC-AG BG0900 board
2013-10-17 09:44:20 +02:00
blackstamp.h
blackfin: Add missing macro CONFIG_BFIN_SERIAL
2013-12-06 16:06:51 +08:00
blackvme.h
blackfin: fix build error by adding CONFIG_BFIN_SERIAL
2013-12-16 11:38:32 +08:00
br4.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
BSC9131RDB.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
BSC9132QDS.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
bubinga.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
bur_am335x_common.h
board/BuR/common: rename "usbupdate" environment to "usbscript"
2015-05-08 17:24:17 -04:00
C29XPCIE.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
calimain.h
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
cam_enc_4xx.h
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
canmb.h
powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition
2014-01-24 16:59:21 -05:00
canyonlands.h
powerpc: ppc4xx: convert AMCC boards to generic board
2015-03-28 12:09:46 -04:00
cardhu.h
ARM: tegra: move common config defines centrally
2015-03-04 10:08:56 -07:00
cgtqmx6eval.h
cgtqmx6eval: Set default environment to use zImage
2014-02-11 11:04:40 +01:00
charon.h
Coding Style cleanup: remove trailing white space
2013-10-14 16:06:53 -04:00
chromebook_link.h
x86: Move CONFIG_ENV_IS_IN_SPI_FLASH to x86-common.h
2015-04-29 18:51:48 -06:00
chromebox_panther.h
x86: Add support for panther (Asus Chromebox)
2015-04-16 19:27:40 -06:00
cm5200.h
powerpc/cm5200: migrate to generic board
2015-01-05 16:40:18 -05:00
cm_fx6.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
cm_t35.h
ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
2015-03-13 09:29:24 -04:00
cm_t54.h
omap5: cm-t54: add sata support
2015-01-05 15:13:47 -05:00
cm_t335.h
compulab: eeprom: add support for defining eeprom i2c bus
2014-09-09 15:32:32 +02:00
cm_t3517.h
ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
2015-03-13 09:29:24 -04:00
cm-bf527.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
cm-bf533.h
kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig
2014-09-24 18:30:28 -04:00
cm-bf537e.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
cm-bf537u.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
cm-bf548.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
cm-bf561.h
kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig
2014-09-24 18:30:28 -04:00
cmi_mpc5xx.h
config: remove platform CONFIG_SYS_HZ definition part 2/2
2013-11-04 11:06:16 -05:00
cobra5272.h
m68k: add architecture-specific u-boot.lds
2015-04-23 14:56:07 -04:00
colibri_pxa270.h
pxa: colibri_pxa270: integrate latest validated register settings
2015-03-02 10:59:51 +01:00
colibri_t20.h
ARM: tegra: update colibri_t20 configuration
2015-03-30 10:04:44 -07:00
colibri_t30.h
apalis/colibri_t30: add misc cmds increase buf sizes and max args
2015-03-04 10:09:02 -07:00
colibri_vf.h
colibri_vf: Enable USB support for Colibri Vybrid
2015-04-23 14:56:09 -04:00
controlcenterd.h
kconfig: move CONFIG_CMD_BOOTM to Kconfig
2014-09-24 18:30:28 -04:00
corenet_ds.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
corvus.h
arm, at91: corvus: move MACH_TYPE to defconfig
2015-04-01 01:04:28 +02:00
CPCI2DP.h
ppc4xx: switch CPCI2DP to generic board
2015-01-13 09:37:26 -05:00
CPCI4052.h
ppc4xx: cleanup CPCI4052 board
2015-01-13 09:37:26 -05:00
cpu9260.h
at91: remove redundant AT91FAMILY definition in board config file
2014-05-27 00:10:52 +02:00
cpuat91.h
ARM: remove CONFIG_ARM920T defines
2014-11-20 11:28:25 -05:00
crownbay.h
x86: queensbay: Implement PIRQ routing
2015-04-29 18:51:49 -06:00
csb272.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
csb472.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
da830evm.h
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
da850evm.h
da850evm: Use generic board and libfdt, fix size for SPI flash
2015-01-05 15:13:46 -05:00
dalmore.h
ARM: tegra: move common config defines centrally
2015-03-04 10:08:56 -07:00
davinci_dm355evm.h
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
davinci_dm355leopard.h
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
davinci_dm365evm.h
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
davinci_dm6467evm.h
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
davinci_dvevm.h
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
davinci_schmoogie.h
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
davinci_sffsdr.h
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
davinci_sonata.h
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
db-88f6820-gp.h
arm: mvebu: Add Armada A38x DB-88F6820-GP board support
2015-05-05 14:32:05 +02:00
db-mv784mp-gp.h
arm: mvebu: Change network init code to allow a more flexible setup
2015-05-05 14:31:49 +02:00
dbau1x00.h
generic-board: select SYS_GENERIC_BOARD for some architectures
2015-03-28 09:03:08 -04:00
devkit3250.h
sizes.h - consolidate for all architectures
2014-03-04 12:15:01 -05:00
devkit8000.h
ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK
2015-03-04 14:55:04 -05:00
dig297.h
ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
2015-03-13 09:29:24 -04:00
digsy_mtc.h
powerpc: digsy_mtc: convert to generic board
2014-10-27 14:35:54 +01:00
dlvision-10g.h
board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards
2014-07-25 10:55:49 +02:00
dlvision.h
board: dlvision: Reduce memory footprint
2014-11-19 08:48:41 +01:00
dnp5370.h
blackfin: replace bfin_gen_rand_mac() with eth_random_addr()
2014-05-12 15:19:46 -04:00
dns325.h
ARM: kirkwood: dns325: Add generic board support
2015-01-12 09:38:47 -05:00
dockstar.h
kirkwood: dockstar: add CONFIG_SYS_GENERIC_BOARD define
2015-01-25 23:56:16 +01:00
dra7xx_evm.h
ARM: DRA7XX: Enable Fastboot
2015-04-23 13:59:19 -04:00
draco.h
siemens, draco: add new target
2014-05-13 19:43:01 -04:00
dreamplug.h
dreamplug: set CONFIG_BUILD_TARGET to build u-boot.kwb
2015-03-05 22:09:00 +01:00
duovero.h
omap4: duovero: Add Gumstix DuoVero machine.
2014-05-23 19:40:05 -04:00
dxr2.h
siemens: change LED indication in DFU mode
2014-05-13 19:43:00 -04:00
ea20.h
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
eb_cpu5282.h
m68k: mcf52x2: move CPU type to Kconfig and refactor config.mk
2015-03-28 09:03:09 -04:00
eb_cpux9k2.h
arm: atmel: eb_cpux9k2: config clean up
2013-12-01 22:38:53 +01:00
ebony.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
eco5pk.h
Add GPL-2.0+ SPDX-License-Identifier to source files
2013-07-24 09:44:38 -04:00
ecovec.h
configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE
2014-02-19 11:10:05 -05:00
edb93xx.h
ARM: remove CONFIG_ARM920T defines
2014-11-20 11:28:25 -05:00
edminiv2.h
i2c: mvtwsi: Support for up to 4 different controllers
2015-04-15 16:33:17 +02:00
embestmx6boards.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
enbw_cmc.h
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
espt.h
sh: sh4: remove CONFIG_SH4 definition from board config
2014-01-08 14:47:40 +09:00
ethernut5.h
nand: Remove unused CONFIG_MTD_NAND_ECC_JFFS2 option
2015-03-30 23:16:54 -05:00
exynos4-common.h
exynos4-common: remove the unsued CONFIG_CMD_PMIC
2015-05-14 18:49:36 -06:00
exynos5-common.h
exynos5: fix build break by adding CONFIG_POWER
2015-05-14 18:49:36 -06:00
exynos5-dt-common.h
dm: cros_ec: Convert to Kconfig
2015-02-19 06:19:18 -07:00
exynos5250-common.h
sandbox: exynos: Move CONFIG_SOUND_WM8994 to Kconfig
2015-04-18 11:11:39 -06:00
exynos5420-common.h
exynos: cros_ec: Drop unnecessary init
2015-04-18 11:11:15 -06:00
exynos-common.h
exynos: config: enable arch memcpy and arch memset
2015-03-09 11:13:28 -04:00
favr-32-ezkit.h
avr32: use dlmalloc for DMA buffers
2015-02-17 22:52:39 +01:00
flea3.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
fx12mm.h
Add GPL-2.0+ SPDX-License-Identifier to source files
2013-07-24 09:44:38 -04:00
galileo.h
x86: Move CONFIG_ENV_IS_IN_SPI_FLASH to x86-common.h
2015-04-29 18:51:48 -06:00
gdppc440etx.h
board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards
2014-07-25 10:55:49 +02:00
goflexhome.h
kirkwood: goflexhome: add CONFIG_SYS_GENERIC_BOARD define
2015-01-25 23:56:16 +01:00
gose.h
arm: rmobile: gose: Add support SDHI
2015-02-25 13:13:46 +09:00
gplugd.h
arm: gplugd: convert to generic board
2015-03-05 22:08:59 +01:00
gr_cpci_ax2000.h
sparc: consolidate CONFIG_{LEON, LEON2, LEON3} definition
2014-03-21 16:44:10 -04:00
gr_ep2s60.h
sparc: consolidate CONFIG_{LEON, LEON2, LEON3} definition
2014-03-21 16:44:10 -04:00
gr_xc3s_1500.h
sparc: consolidate CONFIG_{LEON, LEON2, LEON3} definition
2014-03-21 16:44:10 -04:00
grasshopper.h
grasshopper: enable generic board
2015-02-17 22:54:39 +01:00
grsim_leon2.h
fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK
2014-05-20 15:23:46 +02:00
grsim.h
fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK
2014-05-20 15:23:46 +02:00
guruplug.h
marvell: kirkwood: guruplug refresh for newer kernel
2015-01-26 00:25:29 +01:00
gw_ventana.h
imx: ventana: config: enable Thermal support
2015-05-15 19:21:25 +02:00
h2200.h
kconfig: move CONFIG_CMD_IMPORTENV to Kconfig
2014-09-24 18:30:29 -04:00
hammerhead.h
avr32: use dlmalloc for DMA buffers
2015-02-17 22:52:39 +01:00
harmony.h
ARM: tegra: move common config defines centrally
2015-03-04 10:08:56 -07:00
highbank.h
ARM: highbank: convert to generic board
2014-05-25 15:18:26 +02:00
hrcon.h
mpc83xx: Add gdsys hrcon board
2014-11-19 08:48:42 +01:00
ib62x0.h
kirkwood: ib62x0: add CONFIG_SYS_GENERIC_BOARD define
2015-01-25 23:56:16 +01:00
ibf-dsp561.h
bfin: make env offset sector aligned for bct-brettl2 and ibf-dsp561 boards
2015-01-16 13:31:35 +08:00
icon.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
iconnect.h
kirkwood: iconnect: add CONFIG_SYS_GENERIC_BOARD define
2015-01-25 23:56:16 +01:00
ids8313.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
ima3-mx53.h
config: remove platform CONFIG_SYS_HZ definition part 2/2
2013-11-04 11:06:16 -05:00
imx6_spl.h
imx:mx6 add mx6sx in imx spl header file
2015-01-22 09:55:47 +01:00
imx27lite-common.h
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
imx27lite.h
Coding Style cleanup: remove trailing white space
2013-10-14 16:06:53 -04:00
imx31_litekit.h
ARM: remove CONFIG_ARM1136 defines
2014-11-20 11:28:25 -05:00
imx31_phycore.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
inka4x0.h
powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition
2014-01-24 16:59:21 -05:00
integrator-common.h
ARM: integrator: abolish CONFIG_INTEGRATOR
2015-04-23 08:52:27 -04:00
integratorap.h
ARM: integrator: move board select into mach-integrator/Kconfig
2015-04-23 08:52:27 -04:00
integratorcp.h
ARM: integrator: move CONFIG_ARCH_CINTEGRATOR to Kconfig
2015-04-23 08:52:27 -04:00
intip.h
board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards
2014-07-25 10:55:49 +02:00
io64.h
board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards
2014-07-25 10:55:49 +02:00
io.h
board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards
2014-07-25 10:55:49 +02:00
iocon.h
board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards
2014-07-25 10:55:49 +02:00
ip04.h
bfin: enlarge the monitor size for ip04 board to avoid oversize link error
2015-01-16 13:31:35 +08:00
ipam390.h
arm, da8xx: convert ipam390 board to generic board support
2015-03-05 10:08:13 -05:00
ipek01.h
powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition
2014-01-24 16:59:21 -05:00
jetson-tk1.h
jetson-tk1: Add PSCI configuration options and reserve secure code
2015-05-13 09:24:16 -07:00
jornada.h
config: remove platform CONFIG_SYS_HZ definition part 2/2
2013-11-04 11:06:16 -05:00
jupiter.h
powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition
2014-01-24 16:59:21 -05:00
k2e_evm.h
keystone2: config: align names of images with MCSDK
2014-11-06 11:04:39 -05:00
k2hk_evm.h
keystone2: config: align names of images with MCSDK
2014-11-06 11:04:39 -05:00
k2l_evm.h
keystone2: config: align names of images with MCSDK
2014-11-06 11:04:39 -05:00
katmai.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
kilauea.h
ppc4xx: Remove 4xx NAND booting support
2014-03-07 10:59:06 -05:00
km82xx.h
82xx/km82xx: read the IVM eeprom earlier
2015-02-16 15:48:35 -05:00
km8360.h
mpc83xx: preempt premature board support removal by setting GENERIC_BOARD
2015-03-17 15:21:15 -04:00
km_kirkwood.h
arm/km: disable subpage write for km_kirkwood_pci and kmsuv31 target
2014-08-30 07:46:41 -04:00
kmp204x.h
kmp204x: add support for the kmcoge4 board
2014-02-03 08:38:50 -08:00
koelsch.h
arm: rmobile: koelsch: Add support SDHI
2015-02-25 13:13:43 +09:00
ks2_evm.h
ARM: remove CONFIG_ARMV7 defines
2014-11-20 11:28:24 -05:00
kwb.h
board/BuR/common: rename "usbupdate" environment to "usbscript"
2015-05-08 17:24:17 -04:00
kzm9g.h
rmobile: kconfig: move board select menu and common settings
2014-08-30 21:19:32 -04:00
lacie_kw.h
kirkwood: kconfig: refactor Kconfig and defconfig
2014-08-30 21:21:21 -04:00
lager.h
arm: rmobile: lager: Add support SDHI
2015-02-25 13:13:49 +09:00
lp8x4x.h
Merge branch 'master' of git://git.denx.de/u-boot-arm
2014-01-10 10:56:00 -05:00
ls1021aqds.h
arm: ls102xa: Adjust the load address of U-Boot for NOR boot
2015-05-20 10:33:52 -07:00
ls1021atwr.h
arm: ls102xa: Adjust the load address of U-Boot for NOR boot
2015-05-20 10:33:52 -07:00
ls2085a_common.h
ls2085a: esdhc: Add esdhc support for ls2085a
2015-04-23 16:46:51 -07:00
ls2085a_emu.h
drivers/fsl-mc: Changed MC firmware loading for new boot architecture
2015-04-23 08:55:57 -07:00
ls2085a_simu.h
drivers/fsl-mc: Changed MC firmware loading for new boot architecture
2015-04-23 08:55:57 -07:00
ls2085aqds.h
ls2085a: esdhc: Add esdhc support for ls2085a
2015-04-23 16:46:51 -07:00
ls2085ardb.h
ls2085a: esdhc: Add esdhc support for ls2085a
2015-04-23 16:46:51 -07:00
lsxl.h
lsxl: switch from bootm to bootz for boot commands
2015-02-12 15:28:02 +01:00
luan.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
lwmon5.h
powerpc: lwmon5: remove redundant CONFIG_SPL_* defines
2014-12-08 09:35:43 -05:00
m28evk.h
kconfig: Move REGEX to Kconfig
2015-05-10 09:59:38 -04:00
m53evk.h
kconfig: Move REGEX to Kconfig
2015-05-10 09:59:38 -04:00
M5208EVBE.h
m68k: add architecture-specific u-boot.lds
2015-04-23 14:56:07 -04:00
M5235EVB.h
m68k: add architecture-specific u-boot.lds
2015-04-23 14:56:07 -04:00
M5249EVB.h
m68k: add architecture-specific u-boot.lds
2015-04-23 14:56:07 -04:00
M5253DEMO.h
m68k: add architecture-specific u-boot.lds
2015-04-23 14:56:07 -04:00
M5253EVBE.h
m68k: add architecture-specific u-boot.lds
2015-04-23 14:56:07 -04:00
M5272C3.h
m68k: add architecture-specific u-boot.lds
2015-04-23 14:56:07 -04:00
M5275EVB.h
m68k: add architecture-specific u-boot.lds
2015-04-23 14:56:07 -04:00
M5282EVB.h
m68k: add architecture-specific u-boot.lds
2015-04-23 14:56:07 -04:00
M5329EVB.h
m68k: add architecture-specific u-boot.lds
2015-04-23 14:56:07 -04:00
M5373EVB.h
m68k: add architecture-specific u-boot.lds
2015-04-23 14:56:07 -04:00
M5475EVB.h
m68k: mcf547x_8x: move CPU type to Kconfig and refactor config.mk
2015-03-28 09:03:09 -04:00
M5485EVB.h
m68k: mcf547x_8x: move CPU type to Kconfig and refactor config.mk
2015-03-28 09:03:09 -04:00
M52277EVB.h
m68k: add architecture-specific u-boot.lds
2015-04-23 14:56:07 -04:00
M53017EVB.h
m68k: add architecture-specific u-boot.lds
2015-04-23 14:56:07 -04:00
M54418TWR.h
nand: yaffs: Remove the "nand write.yaffs" command
2015-03-30 23:24:39 -05:00
M54451EVB.h
m68k: mcf5445x: move CPU type to Kconfig and refactor config.mk
2015-03-28 09:03:09 -04:00
M54455EVB.h
m68k: mcf5445x: move CPU type to Kconfig and refactor config.mk
2015-03-28 09:03:09 -04:00
magnesium.h
Coding Style cleanup: remove trailing white space
2013-10-14 16:06:53 -04:00
makalu.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
malta.h
generic-board: select SYS_GENERIC_BOARD for some architectures
2015-03-28 09:03:08 -04:00
maxbcm.h
arm: mvebu: Change network init code to allow a more flexible setup
2015-05-05 14:31:49 +02:00
mcx.h
mcx: update maintainer and convert to generic board
2015-04-09 16:48:03 -04:00
mecp5123.h
powerpc: mecp5123: convert to generic board
2014-10-27 14:35:54 +01:00
medcom-wide.h
ARM: tegra: move common config defines centrally
2015-03-04 10:08:56 -07:00
meesc.h
spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header
2014-11-17 08:47:16 -05:00
microblaze-generic.h
microblaze: spl: Do not call mem_malloc_init and use early alloc
2015-02-09 15:13:12 +01:00
MigoR.h
sh: sh4: remove CONFIG_SH4 definition from board config
2014-01-08 14:47:40 +09:00
mimc200.h
avr32: use dlmalloc for DMA buffers
2015-02-17 22:52:39 +01:00
minnowmax.h
x86: minnowmax: use the correct NOR in the configuration
2015-04-29 18:51:50 -06:00
MIP405.h
MIP405: convert to generic board
2014-10-10 09:44:44 -04:00
ml507.h
Add GPL-2.0+ SPDX-License-Identifier to source files
2013-07-24 09:44:38 -04:00
motionpro.h
powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition
2014-01-24 16:59:21 -05:00
mpc5121-common.h
Add GPL-2.0+ SPDX-License-Identifier to source files
2013-07-24 09:44:38 -04:00
mpc5121ads.h
powerpc: mpc5121ads: convert to generic board
2014-10-27 14:35:54 +01:00
mpc8308_p1m.h
mpc83xx: preempt premature board support removal by setting GENERIC_BOARD
2015-03-17 15:21:15 -04:00
MPC832XEMDS.h
mpc83xx: preempt premature board support removal by setting GENERIC_BOARD
2015-03-17 15:21:15 -04:00
MPC837XEMDS.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
MPC837XERDB.h
Use generic board architecture for MPC837xERDB
2015-01-20 10:19:46 -05:00
MPC8308RDB.h
mpc83xx: preempt premature board support removal by setting GENERIC_BOARD
2015-03-17 15:21:15 -04:00
MPC8313ERDB.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
MPC8315ERDB.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
MPC8323ERDB.h
mpc83xx: preempt premature board support removal by setting GENERIC_BOARD
2015-03-17 15:21:15 -04:00
MPC8349EMDS.h
mpc83xx: preempt premature board support removal by setting GENERIC_BOARD
2015-03-17 15:21:15 -04:00
MPC8349ITX.h
mpc83xx: preempt premature board support removal by setting GENERIC_BOARD
2015-03-17 15:21:15 -04:00
MPC8536DS.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
MPC8540ADS.h
powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk
2014-01-24 16:59:08 -05:00
MPC8541CDS.h
powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk
2014-01-24 16:59:08 -05:00
MPC8544DS.h
powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk
2014-01-24 16:59:08 -05:00
MPC8548CDS.h
powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk
2014-01-24 16:59:08 -05:00
MPC8555CDS.h
powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk
2014-01-24 16:59:08 -05:00
MPC8560ADS.h
powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk
2014-01-24 16:59:08 -05:00
MPC8568MDS.h
powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk
2014-01-24 16:59:08 -05:00
MPC8569MDS.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
MPC8572DS.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
MPC8610HPCD.h
powerpc: mpc86xx: move CONFIG_MPC86xx definition to CPU config.mk
2014-01-24 16:59:08 -05:00
MPC8641HPCN.h
powerpc/mpc8641hpcn: Move environment to avoid conflict
2015-04-20 10:15:30 -07:00
mpr2.h
sh: sh3: remove CONFIG_SH3 definition from board config
2014-01-08 14:47:40 +09:00
ms7720se.h
sh: sh3: remove CONFIG_SH3 definition from board config
2014-01-08 14:47:40 +09:00
ms7722se.h
sh: sh4: remove CONFIG_SH4 definition from board config
2014-01-08 14:47:40 +09:00
ms7750se.h
sh: sh4: remove CONFIG_SH4 definition from board config
2014-01-08 14:47:40 +09:00
mt_ventoux.h
fpga: Guard the LOADMK functionality with CMD_FPGA_LOADMK
2014-05-20 15:23:46 +02:00
munices.h
powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition
2014-01-24 16:59:21 -05:00
mv88f6281gtw_ge.h
kirkwood: kconfig: refactor Kconfig and defconfig
2014-08-30 21:21:21 -04:00
mv-common.h
arm: mvebu: mv-common.h: Add CONFIG_PREBOOT
2015-05-05 14:32:04 +02:00
mx6_common.h
mx6_common: Do not select esdhc DDR mode for all boards
2015-03-13 13:35:12 +01:00
mx6cuboxi.h
mx6cuboxi: Skip usb initialization when booting without HDMI
2015-05-15 19:20:47 +02:00
mx6qarm2.h
mx6qarm2: Use the default CONFIG_SYS_PBSIZE
2015-03-13 13:13:45 +01:00
mx6qsabreauto.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
mx6sabre_common.h
mx6sabre: Do not enable UMS with SPL
2015-03-13 13:46:51 +01:00
mx6sabresd.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
mx6slevk.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
mx6sxsabresd.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
mx23_olinuxino.h
Coding Style cleanup: remove trailing white space
2013-10-14 16:06:53 -04:00
mx23evk.h
mx23evk: Set default environment to use zImage
2014-02-11 11:04:40 +01:00
mx25pdk.h
mx25pdk: Use the default CONFIG_SYS_PBSIZE
2015-03-13 13:13:48 +01:00
mx28evk.h
mx28evk: Fix warning when CONFIG_ENV_IS_IN_SPI_FLASH is selected
2014-06-17 16:39:09 +02:00
mx31ads.h
mx31ads: Convert to generic board
2015-02-24 17:13:36 -05:00
mx31pdk.h
mx31pdk: Use the default CONFIG_SYS_PBSIZE
2015-03-13 13:13:47 +01:00
mx35pdk.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
mx51_efikamx.h
spi: mxc: fix sf probe when using mxc_spi
2014-09-24 17:25:39 +05:30
mx51evk.h
mx51evk: Use the default CONFIG_SYS_PBSIZE
2015-03-13 13:13:47 +01:00
mx53ard.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
mx53evk.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
mx53loco.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
mx53smd.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
mxs.h
mxs: Use the default CONFIG_SYS_PBSIZE
2015-03-13 13:13:48 +01:00
nas220.h
Add support for Seagate BlackArmor NAS220
2015-01-14 11:37:39 -05:00
neo.h
board: Add CONFIG_SYS_GENERIC_BOARD to all gdsys boards
2014-07-25 10:55:49 +02:00
nhk8815.h
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
nios2-generic.h
nios2: rebase nios2-generic board to 3c120 reference design
2014-08-30 17:48:43 +08:00
nitrogen6x.h
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
2015-04-28 12:15:13 -04:00
nokia_rx51.h
ARM: OMAP3: rx51: Enable workaround for ARM errata 454179, 430973, 621766
2015-03-13 09:29:33 -04:00
novena.h
kconfig: Move REGEX to Kconfig
2015-05-10 09:59:38 -04:00
nyan-big.h
tegra: config: nyan-big: Enable LCD
2015-05-13 09:24:12 -07:00
o2d300.h
Use __stringify() instead of xstr()
2014-10-27 17:54:13 -04:00
o2d.h
Use __stringify() instead of xstr()
2014-10-27 17:54:13 -04:00
o2dnt2.h
Use __stringify() instead of xstr()
2014-10-27 17:54:13 -04:00
o2dnt-common.h
powerpc: o2dnt: convert to generic board
2014-11-07 16:27:05 -05:00
o2i.h
Use __stringify() instead of xstr()
2014-10-27 17:54:13 -04:00
o2mnt.h
Use __stringify() instead of xstr()
2014-10-27 17:54:13 -04:00
o3dnt.h
Use __stringify() instead of xstr()
2014-10-27 17:54:13 -04:00
ocotea.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
odroid_xu3.h
Odroid-XU3: enable the last dram bank and reserve 22MiB
2015-03-04 21:25:35 +09:00
odroid.h
odroid: enable driver model pmic/regulator API and MAX77686 drivers
2015-05-14 19:58:34 -06:00
omap3_beagle.h
omap3_beagle: Add boot script support to omap3 beagle board
2014-09-04 13:05:57 -04:00
omap3_cairo.h
omap3: add support for QUIPOS Cairo board.
2015-03-05 20:13:21 -05:00
omap3_evm_common.h
ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
2015-03-13 09:29:24 -04:00
omap3_evm_quick_mmc.h
ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs
2015-03-13 09:28:57 -04:00
omap3_evm_quick_nand.h
ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs
2015-03-13 09:28:57 -04:00
omap3_evm.h
ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs
2015-03-13 09:28:57 -04:00
omap3_igep00x0.h
OMAP3: igep0032: Fix regression due commit f3b4bc45.
2015-02-24 17:04:00 -05:00
omap3_logic.h
ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
2015-03-13 09:29:24 -04:00
omap3_mvblx.h
ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
2015-03-13 09:29:24 -04:00
omap3_overo.h
omap3: overo: Allow boot with kernel in UBI rootfs
2015-05-10 07:29:39 -04:00
omap3_pandora.h
omap3: pandora: use common configuration
2015-04-09 16:49:37 -04:00
omap3_sdp3430.h
ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
2015-03-13 09:29:24 -04:00
omap3_zoom1.h
ARM: OMAP3: Rename omap3.h to omap.h to be generic as all SoCs
2015-03-13 09:28:57 -04:00
omap4_panda.h
ARM: omap4_panda: enable saveenv command
2015-03-28 12:07:44 -04:00
omap4_sdp4430.h
ARM: OMAP4: Rename to ti_omap4_common.h
2014-01-24 11:38:39 -05:00
omap5_uevm.h
TI: armv7: enable UUID and PART
2015-01-05 15:13:45 -05:00
omapl138_lcdk.h
davinci: add support for omapl138-lcdk board
2015-04-23 13:58:43 -04:00
openrd.h
kirkwood: kconfig: refactor Kconfig and defconfig
2014-08-30 21:21:21 -04:00
openrisc-generic.h
config: remove platform CONFIG_SYS_HZ definition part 2/2
2013-11-04 11:06:16 -05:00
origen.h
ORIGEN: Enhance origen config to be more flexible on boot.
2014-11-25 10:30:25 +09:00
ot1200.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
otc570.h
spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header
2014-11-17 08:47:16 -05:00
p1_p2_rdb_pc.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
p1_twr.h
board/freescale: use generic board architecture for p1025-twr
2014-12-05 08:06:09 -08:00
p3p440.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
P1010RDB.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
P1022DS.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
P1023RDB.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
P2041RDB.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
P3041DS.h
Add GPL-2.0+ SPDX-License-Identifier to source files
2013-07-24 09:44:38 -04:00
P4080DS.h
powerpc/p4080: enable support for PCIe SATA
2013-11-22 12:43:15 -08:00
P5020DS.h
Add GPL-2.0+ SPDX-License-Identifier to source files
2013-07-24 09:44:38 -04:00
P5040DS.h
powerpc/P5040DS: enable SATA support
2014-12-05 08:06:10 -08:00
palmld.h
remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2015-03-02 10:59:50 +01:00
palmtc.h
remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2015-03-02 10:59:50 +01:00
palmtreo680.h
remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2015-03-02 10:59:50 +01:00
PATI.h
PATI: fix broken SPI access
2014-10-10 09:44:44 -04:00
paz00.h
ARM: tegra: move common config defines centrally
2015-03-04 10:08:56 -07:00
pb1x00.h
generic-board: select SYS_GENERIC_BOARD for some architectures
2015-03-28 09:03:08 -04:00
pcm030.h
powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition
2014-01-24 16:59:21 -05:00
pcm051.h
pcm051: Add boot script support to pcm051
2015-01-13 15:26:10 -05:00
pcs440ep.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
pdm360ng.h
powerpc: pdm360ng: convert to generic board
2014-10-27 14:35:54 +01:00
peach-pi.h
config: peach: Correct memory layout environment settings
2015-04-06 14:21:29 +09:00
peach-pit.h
config: peach: Correct memory layout environment settings
2015-04-06 14:21:29 +09:00
pengwyn.h
ARM: omap: move board specific NAND configs out from ti_armv7_common.h
2014-07-25 16:26:12 -04:00
pepper.h
am335x: pepper: Add Gumstix Pepper AM335x-based machine
2014-05-13 19:47:51 -04:00
PIP405.h
PIP405: convert to generic board
2014-10-10 09:44:44 -04:00
platinum_picon.h
arm: mx6: Add Barco platinum-picon and platinum-titanium
2015-01-19 09:07:31 +01:00
platinum_titanium.h
arm: mx6: Add Barco platinum-picon and platinum-titanium
2015-01-19 09:07:31 +01:00
platinum.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
PLU405.h
ppc4xx: switch PLU405 to generic board
2015-01-13 09:37:26 -05:00
plutux.h
ARM: tegra: move common config defines centrally
2015-03-04 10:08:56 -07:00
pm9g45.h
PM9G45 adding generic board support
2015-01-13 09:37:27 -05:00
pm9261.h
PM9261 adding generic board support
2015-01-13 09:37:27 -05:00
pm9263.h
PM9263 adding generic board support
2015-01-13 09:37:27 -05:00
PMC405DE.h
ppc4xx: switch PMC405DE to generic board
2015-01-13 09:37:26 -05:00
PMC440.h
ppc4xx: update PMC440 board support
2014-10-27 17:54:13 -04:00
pogo_e02.h
kirkwood: pogo_e02: add CONFIG_SYS_GENERIC_BOARD define
2015-01-25 23:56:16 +01:00
porter.h
arm: rmobile: Add Porter board support
2015-02-25 14:17:49 +09:00
pr1.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
pxa255_idp.h
kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX
2013-12-13 09:15:32 -05:00
pxa-common.h
kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX
2013-12-13 09:15:32 -05:00
pxm2.h
arm, am335x: siemens boards add FIT support
2014-12-04 21:28:32 -05:00
qemu-mips64.h
generic-board: select SYS_GENERIC_BOARD for some architectures
2015-03-28 09:03:08 -04:00
qemu-mips.h
generic-board: select SYS_GENERIC_BOARD for some architectures
2015-03-28 09:03:08 -04:00
qemu-ppce500.h
qemu-ppce500: Add support for 64bit CCSR map
2015-04-20 10:15:29 -07:00
qong.h
ARM: remove CONFIG_ARM1136 defines
2014-11-20 11:28:25 -05:00
r0p7734.h
configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE
2014-02-19 11:10:05 -05:00
r2dplus.h
sh: sh4: remove CONFIG_SH4 definition from board config
2014-01-08 14:47:40 +09:00
r7780mp.h
sh: sh4: Remove CONFIG_SH4A definition from source code
2014-01-09 12:47:15 +09:00
rcar-gen2-common.h
malloc_f: enable SYS_MALLOC_F by default if DM is on
2015-03-28 09:03:09 -04:00
rd6281a.h
kirkwood: kconfig: refactor Kconfig and defconfig
2014-08-30 21:21:21 -04:00
redwood.h
ppc4xx: Remove 4xx NAND booting support
2014-03-07 10:59:06 -05:00
rpi_2.h
rpi: add support for Raspberry Pi 2 model B
2015-02-21 08:28:16 -05:00
rpi-common.h
rpi: add support for Raspberry Pi 2 model B
2015-02-21 08:28:16 -05:00
rpi.h
rpi: add support for Raspberry Pi 2 model B
2015-02-21 08:28:16 -05:00
rsk7203.h
sh: move CONFIG_{SH2, SH2A, SH3, SH4} to Kconfig
2014-11-13 08:47:58 +09:00
rsk7264.h
sh: move CONFIG_{SH2, SH2A, SH3, SH4} to Kconfig
2014-11-13 08:47:58 +09:00
rsk7269.h
sh: move CONFIG_{SH2, SH2A, SH3, SH4} to Kconfig
2014-11-13 08:47:58 +09:00
rut.h
arm, am335x: siemens boards add FIT support
2014-12-04 21:28:32 -05:00
s5p_goni.h
dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig
2015-02-12 15:17:28 -07:00
s5pc210_universal.h
usb: s3c-otg: Split out PHY control
2014-11-07 16:32:02 +01:00
sama5d3_xplained.h
ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h
2015-04-01 01:04:32 +02:00
sama5d3xek.h
ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h
2015-04-01 01:04:32 +02:00
sama5d4_xplained.h
ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h
2015-04-01 01:04:32 +02:00
sama5d4ek.h
ARM: at91: sama5: move the common part of configurations to at91-sama5_common.h
2015-04-01 01:04:32 +02:00
sandbox.h
sandbox: Don't try distro_bootcmd by default
2015-05-06 12:48:36 -06:00
sansa_fuze_plus.h
usb: mv_udc: Rename to ci_udc
2014-02-06 04:48:15 +01:00
sbc405.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
sbc8349.h
mpc83xx: preempt premature board support removal by setting GENERIC_BOARD
2015-03-17 15:21:15 -04:00
sbc8548.h
sbc8548: enable and test CONFIG_SYS_GENERIC_BOARD
2014-11-14 11:12:13 -08:00
sbc8641d.h
powerpc: mpc86xx: move CONFIG_MPC86xx definition to CPU config.mk
2014-01-24 16:59:08 -05:00
sc_sps_1.h
Coding Style cleanup: remove trailing white space
2013-10-14 16:06:53 -04:00
scb9328.h
ARM: remove CONFIG_ARM920T defines
2014-11-20 11:28:25 -05:00
seaboard.h
tegra: seaboard: Remove unused CONFIG_UART_DISABLE_GPIO
2015-03-30 09:59:58 -07:00
secomx6quq7.h
board/seco: Add mx6q-uq7 basic board support
2015-03-23 13:19:18 +01:00
sequoia.h
ppc4xx: Remove 4xx NAND booting support
2014-03-07 10:59:06 -05:00
sh7752evb.h
sh: Move SH_32BIT to Kconfig
2014-11-17 13:16:20 +09:00
sh7753evb.h
sh: Move SH_32BIT to Kconfig
2014-11-17 13:16:20 +09:00
sh7757lcr.h
sh: Move SH_32BIT to Kconfig
2014-11-17 13:16:20 +09:00
sh7763rdp.h
sh: sh4: remove CONFIG_SH4 definition from board config
2014-01-08 14:47:40 +09:00
sh7785lcr.h
sh: sh4: Remove CONFIG_SH4A definition from source code
2014-01-09 12:47:15 +09:00
sheevaplug.h
kirkwood: sheevaplug: add FDT support
2015-02-06 17:24:34 +01:00
shmin.h
configs: Delete obsolete macro, CONFIG_SYS_GBL_DATA_SIZE
2014-02-19 11:10:05 -05:00
siemens-am33x-common.h
ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK
2015-03-04 14:55:04 -05:00
silk.h
arm: rmobile: silk: Add support SDHI
2015-02-25 14:20:10 +09:00
smdk2410.h
Merge branch 'master' of http://git.denx.de/u-boot-samsung
2014-11-26 11:21:16 -05:00
smdk5250.h
exynos: cros_ec: Drop unnecessary init
2015-04-18 11:11:15 -06:00
smdk5420.h
Exynos: Move down common USB configuration
2014-12-30 17:04:02 +09:00
smdkc100.h
dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig
2015-02-12 15:17:28 -07:00
smdkv310.h
usb: s3c-otg: Split out PHY control
2014-11-07 16:32:02 +01:00
snapper9260.h
dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig
2015-02-12 15:17:28 -07:00
snow.h
dm: usb: exynos: Enable both USB ports on snow
2015-04-18 11:11:29 -06:00
snowball.h
remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2015-03-02 10:59:50 +01:00
socfpga_arria5.h
kconfig: Move REGEX to Kconfig
2015-05-10 09:59:38 -04:00
socfpga_common.h
ARM: socfpga: abolish CONFIG_SOCFPGA
2015-05-07 05:21:17 +02:00
socfpga_cyclone5.h
kconfig: Move REGEX to Kconfig
2015-05-10 09:59:38 -04:00
socrates.h
powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk
2014-01-24 16:59:08 -05:00
spear3xx_evb.h
Add GPL-2.0+ SPDX-License-Identifier to source files
2013-07-24 09:44:38 -04:00
spear6xx_evb.h
net/designware - switch driver to phylib usage
2014-02-07 09:16:46 -05:00
spear-common.h
Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig
2015-04-18 11:11:36 -06:00
stamp9g20.h
at91: enable USB ethernet for taskit stamp9g20
2014-03-12 17:04:34 -04:00
stm32f429-discovery.h
stm32f4: add serial print port
2015-05-10 07:29:38 -04:00
stv0991.h
stv0991: fdt: add stv0991 device tree
2015-05-10 09:59:36 -04:00
stxgp3.h
powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk
2014-01-24 16:59:08 -05:00
stxssa.h
powerpc: mpc85xx: move CONFIG_MPC85xx definition to CPU config.mk
2014-01-24 16:59:08 -05:00
sun4i.h
sunxi: usb: Do not call phy_probe from hcd code
2015-05-04 16:51:55 +02:00
sun5i.h
sunxi: usb: Do not call phy_probe from hcd code
2015-05-04 16:51:55 +02:00
sun6i.h
sunxi: usb: Do not call phy_probe from hcd code
2015-05-04 16:51:55 +02:00
sun7i.h
sunxi: usb: Do not call phy_probe from hcd code
2015-05-04 16:51:55 +02:00
sun8i.h
sunxi: usb: Do not call phy_probe from hcd code
2015-05-04 16:51:55 +02:00
sunxi-common.h
sunxi: Change usb-kbd interrupt polling to use an usb interrupt queue
2015-05-14 18:49:36 -06:00
suvd3.h
Add GPL-2.0+ SPDX-License-Identifier to source files
2013-07-24 09:44:38 -04:00
t3corp.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
t4qds.h
powerpc/freescale: Convert selected boards to generic board architecture
2014-05-13 08:31:22 -07:00
T102xQDS.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
T102xRDB.h
powerpc/t1023rdb: Add T1023 RDB board support
2015-05-04 09:24:31 -07:00
T104xRDB.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
T208xQDS.h
powerpc/t2080qds: enable eSDHC peripheral clock support
2015-05-04 09:25:48 -07:00
T208xRDB.h
board/t2080rdb: enable CONFIG_PHY_AQUANTIA
2015-04-20 10:15:30 -07:00
T1040QDS.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
T4240QDS.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
T4240RDB.h
powerpc/t4rdb: Add SD boot support for T4240RDB board
2015-05-04 09:24:04 -07:00
taihu.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
taishan.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
tam3517-common.h
ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
2015-03-13 09:29:24 -04:00
tao3530.h
ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
2015-03-13 09:29:24 -04:00
taurus.h
arm, at91: taurus remove MACH_TYPE definitions in config file
2015-02-07 23:43:24 +01:00
tb100.h
Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig
2015-04-18 11:11:36 -06:00
tbs2910.h
tbs2910: add CONFIG_SUPPORT_EMMC_BOOT
2015-05-15 19:21:24 +02:00
tcm-bf518.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
tcm-bf537.h
blackfin: convert to use CONFIG_SYS_I2C framework
2014-11-17 08:10:37 +01:00
tec-ng.h
ARM: tegra: move common config defines centrally
2015-03-04 10:08:56 -07:00
tec.h
ARM: tegra: move common config defines centrally
2015-03-04 10:08:56 -07:00
tegra20-common.h
ARM: tegra: CONFIG_{SYS_, }LOAD{_, }ADDR rationalization
2015-05-13 09:24:12 -07:00
tegra30-common.h
ARM: tegra: CONFIG_{SYS_, }LOAD{_, }ADDR rationalization
2015-05-13 09:24:12 -07:00
tegra114-common.h
ARM: tegra: CONFIG_{SYS_, }LOAD{_, }ADDR rationalization
2015-05-13 09:24:12 -07:00
tegra124-common.h
ARM: tegra: CONFIG_{SYS_, }LOAD{_, }ADDR rationalization
2015-05-13 09:24:12 -07:00
tegra-common-post.h
ARM: tegra: CONFIG_{SYS_, }LOAD{_, }ADDR rationalization
2015-05-13 09:24:12 -07:00
tegra-common-usb-gadget.h
ARM: tegra: enable DFU too
2014-08-18 16:57:03 -07:00
tegra-common.h
ARM: tegra: enable STDIO deregistration
2015-05-13 09:24:12 -07:00
ti814x_evm.h
ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK
2015-03-04 14:55:04 -05:00
ti816x_evm.h
ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK
2015-03-04 14:55:04 -05:00
ti_am335x_common.h
dm: Kconfig: Move CONFIG_SYS_MALLOC_F_LEN to Kconfig
2015-02-12 15:17:28 -07:00
ti_armv7_common.h
ti: am335x/am437x/omap5 devices: Unify network environment variables
2015-05-08 17:24:16 -04:00
ti_omap3_common.h
ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
2015-03-13 09:29:24 -04:00
ti_omap4_common.h
TI:OMAP4: enable EXT support in SPL for OMAP4 boards
2014-10-27 17:54:09 -04:00
ti_omap5_common.h
ti: am335x/am437x/omap5 devices: Unify network environment variables
2015-05-08 17:24:16 -04:00
titanium.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
tk71.h
kirkwood: kconfig: refactor Kconfig and defconfig
2014-08-30 21:21:21 -04:00
TQM823L.h
powerpc: tqm8xx*: convert to generic board
2014-10-29 16:18:08 +01:00
TQM823M.h
powerpc: tqm8xx*: convert to generic board
2014-10-29 16:18:08 +01:00
TQM834x.h
mpc83xx: preempt premature board support removal by setting GENERIC_BOARD
2015-03-17 15:21:15 -04:00
TQM850L.h
powerpc: tqm8xx*: convert to generic board
2014-10-29 16:18:08 +01:00
TQM850M.h
powerpc: tqm8xx*: convert to generic board
2014-10-29 16:18:08 +01:00
TQM855L.h
powerpc: tqm8xx*: convert to generic board
2014-10-29 16:18:08 +01:00
TQM855M.h
powerpc: tqm8xx*: convert to generic board
2014-10-29 16:18:08 +01:00
TQM860L.h
powerpc: tqm8xx*: convert to generic board
2014-10-29 16:18:08 +01:00
TQM860M.h
powerpc: tqm8xx*: convert to generic board
2014-10-29 16:18:08 +01:00
TQM862L.h
powerpc: tqm8xx*: convert to generic board
2014-10-29 16:18:08 +01:00
TQM862M.h
powerpc: tqm8xx*: convert to generic board
2014-10-29 16:18:08 +01:00
TQM866M.h
powerpc: tqm8xx*: convert to generic board
2014-10-29 16:18:08 +01:00
TQM885D.h
powerpc: tqm8xx*: convert to generic board
2014-10-29 16:18:08 +01:00
TQM5200.h
powerpc: TQM5200: convert to generic board
2014-10-29 16:18:09 +01:00
tqma6_mba6.h
arm: mx6: tqma6: Extract baseboard configs into separate config file
2015-04-22 16:02:45 +02:00
tqma6.h
arm: mx6: tqma6: Fix USB and add other filesystems
2015-05-15 19:20:47 +02:00
trats2.h
config: exynos: trats2: Enable support for Image.itb at trats2 device
2015-04-06 15:23:59 +09:00
trats.h
config: exynos: trats: Enable support for Image.itb at trats device
2015-04-06 15:23:59 +09:00
tricorder.h
ARM: OMAP3: Enable workaround for ARM errata 454179, 430973, 621766
2015-03-13 09:29:24 -04:00
trimslice.h
ARM: tegra: move common config defines centrally
2015-03-04 10:08:56 -07:00
trizepsiv.h
kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX
2013-12-13 09:15:32 -05:00
tseries.h
board/BuR/common: rename "usbupdate" environment to "usbscript"
2015-05-08 17:24:17 -04:00
tt01.h
ARM: remove CONFIG_ARM1136 defines
2014-11-20 11:28:25 -05:00
tuxx1.h
Add GPL-2.0+ SPDX-License-Identifier to source files
2013-07-24 09:44:38 -04:00
twister.h
ARM: twister: add missing gpio clock init
2014-01-07 16:41:12 -05:00
tx25.h
include: remove CONFIG_SPL/CONFIG_TPL definition in config headers
2014-07-30 14:42:03 -04:00
u8500_href.h
remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2015-03-02 10:59:50 +01:00
UCP1020.h
powerpc/mpc85xx: Add board support for ucp1020
2015-05-04 09:26:26 -07:00
udoo.h
config: remove redundant CONFIG_SYS_PROMPT defines
2014-11-23 06:49:02 -05:00
uniphier.h
ARM: UniPhier: add empty lowlevel_init to U-boot proper
2015-03-24 00:15:48 +09:00
usb_a9263.h
spi, atmel: move CONFIG_SYS_SPI_WRITE_TOUT into common header
2014-11-17 08:47:16 -05:00
usbarmory.h
ARM: mx5: add support for USB armory board
2015-04-09 09:14:12 +02:00
v5fx30teval.h
Add GPL-2.0+ SPDX-License-Identifier to source files
2013-07-24 09:44:38 -04:00
v38b.h
powerpc: mpc5xxx: remove redundant CONFIG_MPC5xxx definition
2014-01-24 16:59:21 -05:00
VCMA9.h
nand: yaffs: Remove the "nand write.yaffs" command
2015-03-30 23:24:39 -05:00
vct.h
generic-board: select SYS_GENERIC_BOARD for some architectures
2015-03-28 09:03:08 -04:00
ve8313.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
venice2.h
ARM: tegra: move common config defines centrally
2015-03-04 10:08:56 -07:00
ventana.h
ARM: tegra: move common config defines centrally
2015-03-04 10:08:56 -07:00
versatile.h
ARM: remove CONFIG_ARM926EJS defines
2014-11-20 11:28:25 -05:00
vexpress_aemv8a.h
vexpress64: use DM for all vexpress64 boards
2015-04-23 08:52:26 -04:00
vexpress_ca5x2.h
Coding Style cleanup: remove trailing white space
2013-10-14 16:06:53 -04:00
vexpress_ca9x4.h
Coding Style cleanup: remove trailing white space
2013-10-14 16:06:53 -04:00
vexpress_ca15_tc2.h
ARM: Add arch/arm/cpu/armv7/Kconfig with non-secure and virt options
2014-11-24 09:09:49 +01:00
vexpress_common.h
remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2015-03-02 10:59:50 +01:00
vf610twr.h
arm: vf610: Remove duplicate MTD defines.
2015-01-14 11:35:44 -05:00
vision2.h
spi: mxc: fix sf probe when using mxc_spi
2014-09-24 17:25:39 +05:30
vl_ma2sc.h
ARM: at91: remove redundant ARM926EJS definition in board config files
2014-05-27 00:10:53 +02:00
vme8349.h
mpc83xx: preempt premature board support removal by setting GENERIC_BOARD
2015-03-17 15:21:15 -04:00
VOM405.h
ppc4xx: switch VOM405 to generic board
2015-01-13 09:37:27 -05:00
vpac270.h
pxa: balloon3/colibri_pxa270: fix environment optionally being nowhere
2015-03-02 10:59:50 +01:00
walnut.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
wandboard.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
warp.h
warp: Select CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
2015-03-13 13:35:35 +01:00
whistler.h
ARM: tegra: move common config defines centrally
2015-03-04 10:08:56 -07:00
wireless_space.h
kirkwood: kconfig: refactor Kconfig and defconfig
2014-08-30 21:21:21 -04:00
woodburn_common.h
driver/i2c/mxc: Enable I2C bus 3 and 4
2015-04-23 08:55:53 -07:00
woodburn_sd.h
include: remove CONFIG_SPL/CONFIG_TPL definition in config headers
2014-07-30 14:42:03 -04:00
woodburn.h
Coding Style cleanup: remove trailing white space
2013-10-14 16:06:53 -04:00
work_92105.h
lpc32xx: add support for board work_92105
2015-04-10 14:23:39 +02:00
x86-chromebook.h
x86: Move common Chromebook config into a separate file
2015-04-16 19:27:40 -06:00
x86-common.h
x86: Write configuration tables in last_stage_init()
2015-04-29 18:51:49 -06:00
x600.h
Kconfig: Move CONFIG_DESIGNWARE_ETH to Kconfig
2015-04-18 11:11:36 -06:00
xaeniax.h
kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX
2013-12-13 09:15:32 -05:00
xfi3.h
usb: mv_udc: Rename to ci_udc
2014-02-06 04:48:15 +01:00
xilinx_zynqmp.h
zynqmp: Enable SDHCI0 options
2015-04-29 11:19:04 +02:00
xilinx-ppc405-generic.h
Add GPL-2.0+ SPDX-License-Identifier to source files
2013-07-24 09:44:38 -04:00
xilinx-ppc405.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
xilinx-ppc440-generic.h
Add GPL-2.0+ SPDX-License-Identifier to source files
2013-07-24 09:44:38 -04:00
xilinx-ppc440.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
xilinx-ppc.h
config: remove platform CONFIG_SYS_HZ definition part 2/2
2013-11-04 11:06:16 -05:00
xpedite517x.h
powerpc: xes: Convert to generic board
2015-01-12 09:38:47 -05:00
xpedite520x.h
powerpc: xes: Convert to generic board
2015-01-12 09:38:47 -05:00
xpedite537x.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
xpedite550x.h
nand: Remove CONFIG_MTD_NAND_VERIFY_WRITE
2015-03-30 23:24:39 -05:00
xpedite1000.h
powerpc: xes: Convert to generic board
2015-01-12 09:38:47 -05:00
yosemite.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
yucca.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
zeus.h
powerpc: ppc4xx: remove redundant CONFIG_4xx definition
2014-01-24 16:59:07 -05:00
zipitz2.h
remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2015-03-02 10:59:50 +01:00
zmx25.h
zmx25: Convert to generic board
2015-02-24 17:13:57 -05:00
zynq_microzed.h
kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig
2014-09-25 09:31:24 -04:00
zynq_picozed.h
zynq: Add Zynq PicoZed board support
2015-04-29 11:19:02 +02:00
zynq_zc70x.h
kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig
2014-09-25 09:31:24 -04:00
zynq_zc770.h
kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig
2014-09-25 09:31:24 -04:00
zynq_zed.h
kconfig: move CONFIG_DEFAULT_DEVICE_TREE to kconfig
2014-09-25 09:31:24 -04:00
zynq_zybo.h
zynq: zybo: Move CONFIG_DEFAULT_DEVICE_TREE to defconfig
2014-11-13 08:38:22 -05:00
zynq-common.h
Merge branch 'u-boot/master' into 'u-boot-arm/master'
2015-05-05 10:09:06 +02:00