Files
u-boot-tk1-som/board
Liu Gang 5870fe44b2 powerpc/b4860qds: Slave module for boot from SRIO and PCIE
When a b4860qds board boots from SRIO or PCIE, it needs to finish these
processes:
	1. Set all the cores in holdoff status.
	2. Set the boot location to one PCIE or SRIO interface by RCW.
	3. Set a specific TLB entry for the boot process.
	4. Set a LAW entry with the TargetID of one PCIE or SRIO for the boot.
	5. Set a specific TLB entry in order to fetch ucode and ENV from
	   master.
	6. Set a LAW entry with the TargetID one of the PCIE ports for
	   ucode and ENV.
	7. Slave's u-boot image should be generated specifically by
	   make xxxx_SRIO_PCIE_BOOT_config.
	   This will set SYS_TEXT_BASE=0xFFF80000 and other configurations.

For more information about the feature of Boot from SRIO/PCIE, please
refer to the document doc/README.srio-pcie-boot-corenet.

Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-06-20 17:08:48 -05:00
..
2011-11-27 19:44:21 +01:00
2013-04-01 16:33:52 -04:00
2010-12-09 10:25:56 +01:00
2013-05-21 11:54:16 +02:00
2013-04-01 16:33:52 -04:00
2013-04-01 16:33:52 -04:00
2012-02-12 15:03:25 -05:00
2011-10-15 22:20:36 +02:00
2013-02-08 22:32:38 -05:00
2010-12-09 10:25:56 +01:00
2010-12-09 10:25:56 +01:00
2013-05-05 17:55:05 +02:00
2013-04-01 16:33:52 -04:00
2011-10-15 22:20:36 +02:00
2013-04-01 16:33:52 -04:00
2013-04-01 16:33:52 -04:00
2013-05-05 23:47:05 +02:00
2013-03-09 08:22:57 +01:00
2012-10-15 11:54:14 -07:00
2011-10-15 22:20:36 +02:00
2011-10-15 22:20:36 +02:00
2012-03-26 23:09:23 +02:00
2013-04-22 09:53:53 +02:00
2013-04-01 16:33:52 -04:00
2011-10-15 22:20:36 +02:00
2010-12-09 10:25:56 +01:00
2010-12-09 10:25:56 +01:00
2010-11-28 21:45:32 +01:00
2012-02-12 15:03:25 -05:00
2013-04-01 16:33:52 -04:00
2013-04-01 16:33:52 -04:00
2013-04-01 16:33:52 -04:00
2012-10-04 16:59:13 +02:00
2013-05-05 17:55:03 +02:00
2011-10-15 22:20:36 +02:00