Matt Porter f485c8a35b phy: add support for ET1011C phys ...

Adds an ET1011C PHY driver which is derived from the
Linux kernel PHY driver (drivers/net/phy/et1011c.c)
from the v3.9-rc2 tag. Note that an errata workaround
config option is implemented to allow for TX_CLK to be
enabled even when gigabit mode is negotiated. This
workaround is used on the PG1.0 TI814X EVM.

Signed-off-by: Matt Porter <mporter@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>

2013-05-10 08:25:54 -04:00

..

atheros.c

net/: sparse fixes

2012-11-04 11:00:36 -07:00

broadcom.c

phylib: Add a bunch of PHY drivers from tsec

2011-04-20 15:09:34 -05:00

davicom.c

phylib: Add a bunch of PHY drivers from tsec

2011-04-20 15:09:34 -05:00

et1011c.c

phy: add support for ET1011C phys

2013-05-10 08:25:54 -04:00

generic_10g.c

phylib: Detect link on 10G devices correctly

2011-07-27 23:21:25 +02:00

lxt.c

phylib: Add a bunch of PHY drivers from tsec

2011-04-20 15:09:34 -05:00

Makefile

phy: add support for ET1011C phys

2013-05-10 08:25:54 -04:00

marvell.c

net: phy: Define Marvell 88e1518 phy

2013-04-30 11:39:13 +02:00

micrel.c

net: phy: micrel: make ksz9021 phy accessible

2012-07-11 13:15:30 -05:00

miiphybb.c

Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC

2010-10-29 21:32:07 +02:00

mv88e61xx.c

mv88e61xx: refactor PHY and SWITCH level-code

2013-01-09 04:12:10 +05:30

mv88e61xx.h

mv88e61xx: refactor PHY and SWITCH level-code

2013-01-09 04:12:10 +05:30

mv88e6352.c

net/phy: support the mv88e6352 switch

2012-09-27 12:21:56 -05:00

natsemi.c

phylib: Add a bunch of PHY drivers from tsec

2011-04-20 15:09:34 -05:00

phy.c

phy: add support for ET1011C phys

2013-05-10 08:25:54 -04:00

realtek.c

phylib: Add a bunch of PHY drivers from tsec

2011-04-20 15:09:34 -05:00

smsc.c

phy: Add support for SMSC LAN87xx PHYs

2011-12-05 23:07:59 +01:00

teranetics.c

powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9)

2011-10-20 16:01:37 -05:00

vitesse.c

drivers/net/: sparse fixes

2012-11-04 11:00:36 -07:00