u-boot-tk1-som/drivers at 4c6a9ca103f953b6e5e6dfcd56fb558e61ca3c05 - u-boot-tk1-som - Gitea

yair/u-boot-tk1-som

Files

History

Chen-Yu Tsai 4c6a9ca103 power: axp818: Fix DCDC5 default voltage

DCDC5 is designed to supply VCC-DRAM, which is normally 1.5V for DDR3,
1.35V for DDR3L, and 1.2V for LPDDR3.

Also remove CONFIG_AXP_DCDC5_VOLT from h8_homlet_v2_defconfig.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

2016-03-31 17:03:56 +02:00

..

sandbox: add ADC driver

2015-11-02 10:38:00 +09:00

dm: pci: Convert bios_emu to use the driver model PCI API

2016-01-24 12:07:19 +08:00

Fix spelling of "transferred".

2016-03-22 12:16:16 -04:00

bootcount: Correct #endif comment to match, other aesthetics

2016-01-08 10:15:43 -05:00

clk: uniphier: add Media I/O clock driver for UniPhier SoCs

2016-02-14 16:36:13 +09:00

syscon: Avoid returning a device on failure

2016-03-17 10:27:24 +08:00

x86: Move MP initialization codes into a common place

2015-07-14 18:03:16 -06:00

crypto/fsl: Make CAAM transactions cacheable

2016-03-29 08:46:22 -07:00

Fix typo choosen in comments and printf logs

2016-03-27 09:12:23 -04:00

drivers: hierarchize drivers Kconfig menu

2015-08-12 20:47:44 -04:00

dm: part: Rename some partition functions

2016-03-14 15:34:50 -06:00

drivers: dma: ti-edma3: convert driver to adopt driver model

2016-02-23 16:14:46 +05:30

fpga: altera: Add StratixV support

2016-03-24 09:47:43 +01:00

sunxi: axp: Generalize register macros for VBUS drive GPIO

2016-03-31 17:03:52 +02:00

mailaddr: Update mail address

2016-01-27 15:32:05 +01:00

omap24xx_i2c: Implement CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW

2016-03-28 09:23:28 +02:00

input: i8042: Make sure the keyboard is enabled

2016-03-17 10:27:24 +08:00

dm: led: Tidy up SPL options for the led and led-gpio

2015-09-02 21:28:22 -06:00

Various Makefiles: Add SPDX-License-Identifier tags

2015-11-10 09:19:52 -05:00

Merge git://git.denx.de/u-boot-dm

2016-03-14 19:21:44 -04:00

mmc: Print send_cmd response only when return value is zero

2016-03-27 09:12:24 -04:00

cfi_flash: return device into read array mode after reading status

2016-03-27 09:13:02 -04:00

net: phy: Optionally force master mode for RTL PHY

2016-03-31 14:29:11 +02:00

x86: pch9: Implement get_io_base op

2016-02-05 12:47:21 +08:00

pci/layerscape: set LUT and msi-map for discovered PCI devices

2016-03-21 12:42:13 -07:00

powerpc: mpc824x: remove MPC824X cpu support

2015-01-05 12:08:55 -05:00

ARM: uniphier: drop PH1- prefix from CONFIG options and file names

2016-03-24 01:42:13 +09:00

power: axp818: Fix DCDC5 default voltage

2016-03-31 17:03:56 +02:00

tegra: video: Move LCD driver to use the DM PWM driver

2016-02-16 09:17:53 -07:00

board: ls1043ardb: Add micro QE support for ls1043ardb

2016-02-24 08:51:14 -08:00

ram: rename CONFIG_SPL_RAM_SUPPORT to CONFIG_SPL_RAM

2015-08-18 13:46:02 -04:00

remoteproc: Add support for TI power processor

2016-03-14 19:18:37 -04:00

rtc: Add MCP79411 support to DS1307 rtc driver

2015-11-04 15:19:12 -08:00

serial: add BCM283x mini UART driver

2016-03-27 09:12:52 -04:00

Use correct spelling of "U-Boot"

2016-02-06 12:00:59 +01:00

of: clean up OF_CONTROL ifdef conditionals

2015-08-18 13:46:05 -04:00

spi: omap3: Fix multiple definition of 'priv'

2016-03-15 14:50:09 -04:00

imx: mx7: fix the temperature checking for Rev1.1

2016-01-07 17:53:11 +01:00

Merge git://git.denx.de/u-boot-dm

2016-03-14 19:21:44 -04:00

tpm: st33zp24: Add tpm st33zp24 spi support

2016-01-28 21:01:22 -07:00

drivers: convert makefiles to Kbuild style

2013-10-31 13:26:01 -04:00

musb: sunxi: Add support for A83T

2016-03-31 17:03:49 +02:00

Revert "pxa_lcd: make driver cache-aware"

2016-03-27 20:58:08 -04:00

imx_watchdog: always set minimal timeout in reset_cpu

2016-01-07 17:54:53 +01:00

Kconfig

dm: pwm: Add a PWM uclass

2016-01-21 20:42:36 -07:00

Makefile

drivers: ddr: Add DDR2 SDRAM controller driver for Microchip PIC32.

2016-02-01 22:14:01 +01:00