yair/u-boot-tk1-som
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
5da71efa18e8b4eac9afd8bfa13e3c7e7ddde1d0
u-boot-tk1-som/include/configs
History
Eric Millbrandt 5da71efa18 Reset i2c slave devices during init on mpc5xxx cpus 
Reset any i2c devices that may have been interrupted during a system reset.
Normally this would be accomplished by clocking the line until SCL and SDA
are released and then sending a start condtiion (From an Atmel datasheet).
There is no direct access to the i2c pins so instead create start commands
through the i2c interface.  Send a start command then delay for the SDA Hold
time, repeat this by disabling/enabling the bus a total of 9 times.

Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
2009-09-06 11:26:04 +02:00
..
A3000.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
acadia.h
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 15:32:10 +02:00
actux1.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
actux2.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
actux3.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
actux4.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
ADCIOP.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
Adder.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
AdderUSB.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ADNPESC1_base_32.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ADNPESC1.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
ADS860.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
aev.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
afeb9260.h
AT91: factor out ROUND() macro
2009-07-22 09:30:31 +02:00
Alaska8220.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
alpr.h
NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
2009-01-23 10:32:51 -06:00
amcc-common.h
ppc4xx: amcc: Move "kernel_addr_r" etc to higher locations (> 16MB)
2009-07-30 07:22:18 +02:00
AmigaOneG3SE.h
stdio/device: rework function naming convention
2009-07-18 00:27:46 +02:00
AMX860.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ap325rxa.h
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
2009-07-22 22:53:44 -07:00
AP1000.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
APC405.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
apollon.h
NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 21:56:15 +02:00
AR405.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
aria.h
Remove last remanants of unused CONFIG_I2C_CMD_TREE
2009-07-20 23:54:57 +02:00
armadillo.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
ASH405.h
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 15:32:10 +02:00
assabet.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
at91cap9adk.h
Update the mtd driver name in bootargs for at91-based boards
2009-08-18 13:51:51 +02:00
at91rm9200dk.h
rm9200 lowevel_init: don't touch reserved/readonly registers
2009-08-03 09:26:26 +02:00
at91rm9200ek.h
rm9200 lowevel_init: don't touch reserved/readonly registers
2009-08-03 09:26:26 +02:00
at91sam9m10g45ek.h
Update the mtd driver name in bootargs for at91-based boards
2009-08-18 13:51:51 +02:00
at91sam9rlek.h
Update the mtd driver name in bootargs for at91-based boards
2009-08-18 13:51:51 +02:00
at91sam9260ek.h
Update the mtd driver name in bootargs for at91-based boards
2009-08-18 13:51:51 +02:00
at91sam9261ek.h
Update the mtd driver name in bootargs for at91-based boards
2009-08-18 13:51:51 +02:00
at91sam9263ek.h
Update the mtd driver name in bootargs for at91-based boards
2009-08-18 13:51:51 +02:00
atc.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
atngw100.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
atstk1002.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
atstk1003.h
Merge branch 'fixes' into cleanups
2008-12-17 16:53:07 +01:00
atstk1004.h
Merge branch 'fixes' into cleanups
2008-12-17 16:53:07 +01:00
atstk1006.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
ATUM8548.h
85xx: Remove unused CONFIG_CLEAR_LAW0 defines
2009-08-28 17:12:37 -05:00
B2.h
arm: remove cpu_init
2009-06-12 20:39:52 +02:00
BAB7xx.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
bamboo.h
NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
2009-01-23 10:32:51 -06:00
barco.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
BC3450.h
mtd: MTD related config header changes (mtdparts command)
2009-06-12 20:45:47 +02:00
bf518f-ezbrd.h
Blackfin: fix SPI flash speed define name
2009-06-15 13:30:21 -04:00
bf526-ezbrd.h
Blackfin: fix SPI flash speed define name
2009-06-15 13:30:21 -04:00
bf527-ezkit.h
Blackfin: fix SPI flash speed define name
2009-06-15 13:30:21 -04:00
bf533-ezkit.h
Blackfin: convert specific pre/post config headers to common method
2009-06-14 20:01:13 -04:00
bf533-stamp.h
Blackfin: bf533-stamp: back down SCLK a bit
2009-07-18 21:16:01 -04:00
bf537-minotaur.h
Blackfin: bf537-{minotaur,srv1}: do not hardcode CONFIG_ETHADDR
2009-07-18 21:16:08 -04:00
bf537-pnav.h
Blackfin: fix SPI flash speed define name
2009-06-15 13:30:21 -04:00
bf537-srv1.h
Blackfin: bf537-{minotaur,srv1}: do not hardcode CONFIG_ETHADDR
2009-07-18 21:16:08 -04:00
bf537-stamp.h
Blackfin: bf537-stamp: comment CF-Flash Card Support better
2009-09-02 05:14:01 -04:00
bf538f-ezkit.h
Blackfin: fix SPI flash speed define name
2009-06-15 13:30:21 -04:00
bf548-ezkit.h
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
2009-07-22 22:53:44 -07:00
bf561-ezkit.h
Blackfin: unify u-boot linker scripts
2009-06-14 20:01:14 -04:00
bfin_adi_common.h
Blackfin: enable 64bit printf for nand
2009-09-02 05:58:39 -04:00
blackstamp.h
Blackfin: blackstamp: update spi flash settings
2009-07-10 02:36:28 -04:00
BMW.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
bubinga.h
i2c: Update references to individual i2c commands
2009-06-12 20:39:46 +02:00
c2mon.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
CANBT.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
canmb.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
canyonlands.h
ppc4xx: Fix "chip_config" command for AMCC Arches
2009-08-18 09:16:33 +02:00
CATcenter.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
CCM.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
cerf250.h
pxa: move serial driver to drivers/serial
2009-06-12 20:39:52 +02:00
cm41xx.h
ks8695: move serial driver to drivers/serial
2009-03-29 23:01:42 +02:00
cm4008.h
ks8695: move serial driver to drivers/serial
2009-03-29 23:01:42 +02:00
cm5200.h
mtd: MTD related config header changes (mtdparts command)
2009-06-12 20:45:47 +02:00
cm-bf527.h
Blackfin: cm-bf527/cm-bf537: increase flash sectors
2009-08-23 17:33:40 -04:00
cm-bf533.h
Blackfin: convert specific pre/post config headers to common method
2009-06-14 20:01:13 -04:00
cm-bf537e.h
Blackfin: cm-bf527/cm-bf537: increase flash sectors
2009-08-23 17:33:40 -04:00
cm-bf537u.h
Blackfin: cm-bf537u: new board port
2009-09-02 05:58:37 -04:00
cm-bf548.h
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
2009-07-22 22:53:44 -07:00
cm-bf561.h
Coding Style cleanup; update CHANGELOG.
2009-07-23 22:23:23 +02:00
cmc_pu2.h
rm9200 lowevel_init: don't touch reserved/readonly registers
2009-08-03 09:26:26 +02:00
cmi_mpc5xx.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
CMS700.h
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 15:32:10 +02:00
cobra5272.h
unify {CONFIG_,}ENV_IS_EMBEDDED
2009-08-25 12:57:54 +02:00
cogent_common.h
* Patch by Shlomo Kut, 29 Mar 2004:
2004-09-29 11:02:56 +00:00
cogent_mpc8xx.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
cogent_mpc8260.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
compactcenter.h
ppc4xx: Add GDsys CompactCenter board support.
2009-07-28 07:20:34 +02:00
CPC45.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
cpci5200.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
CPCI2DP.h
ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
2009-01-26 10:40:42 +01:00
CPCI405.h
ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
2009-01-26 10:40:42 +01:00
CPCI405AB.h
ppc4xx: Abort autoboot only by space key on CPCI405 boards
2009-03-20 22:39:13 +01:00
CPCI405DT.h
ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
2009-01-26 10:40:42 +01:00
CPCI750.h
74xx_7xx: CPCI750: Add CPCI adapter/target support
2009-06-12 20:47:18 +02:00
CPCI4052.h
ppc4xx: Abort autoboot only by space key on CPCI405 boards
2009-03-20 22:39:13 +01:00
CPCIISER4.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
CPU86.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
CPU87.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
cradle.h
pxa: move serial driver to drivers/serial
2009-06-12 20:39:52 +02:00
CRAYL1.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
csb226.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
csb272.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
csb472.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
csb637.h
rm9200 lowevel_init: don't touch reserved/readonly registers
2009-08-03 09:26:26 +02:00
CU824.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
DASA_SIM.h
ppc4xx: Update TEXT_BASE for DASA_SIM boards
2009-03-20 22:39:13 +01:00
davinci_dm355evm.h
dm355/pm9261: add missing CONFIG_NET_MULTI
2009-07-06 21:52:33 +02:00
davinci_dvevm.h
Switched davinci_emac Ethernet driver to use newer API
2009-06-15 00:13:54 -07:00
davinci_schmoogie.h
NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 21:56:15 +02:00
davinci_sffsdr.h
NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 21:56:15 +02:00
davinci_sonata.h
Switched davinci_emac Ethernet driver to use newer API
2009-06-15 00:13:54 -07:00
DB64360.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
DB64460.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
dbau1x00.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
debris.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
delta.h
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
2009-07-19 00:38:23 +02:00
digsy_mtc.h
digsy_mtc: Update default environment
2009-08-09 23:01:41 +02:00
DK1C20_safe_32.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
DK1C20_standard_32.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
DK1C20.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
DK1S10_mtx_ldk_20.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
DK1S10_safe_32.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
DK1S10_standard_32.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
DK1S10.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
dlvision.h
ppc4xx: Add DL-Vision 405EP board support
2009-07-24 06:42:31 +02:00
dnp1110.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
DP405.h
4xx: Remove binary cpld bitstream from DP405 board
2009-06-12 20:39:47 +02:00
DU405.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
DU440.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
EB+MCF-EV123.h
update the EB+MCF-EV123 board support
2009-07-26 13:19:23 +02:00
ebony.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ELPPC.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
ELPT860.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
eNET.h
Add PCI support to eNET board
2009-09-04 21:57:50 +02:00
ep82xxm.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ep7312.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
ep8248.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ep8260.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
EP1C20.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
EP1S10.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
EP1S40.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
EP88x.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ERIC.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
espt.h
sh: Add support ESPT-GIGA borad
2009-07-11 09:02:21 +09:00
ESTEEM192E.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ETX094.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
evb4510.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
EVB64260.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
eXalion.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
EXBITGEN.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
FADS823.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
FADS850SAR.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
FADS860T.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
favr-32-ezkit.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
FLAGADM.h
8xx, icache: enabling ICache not before running from RAM
2009-03-18 20:48:29 +01:00
FPS850L.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
FPS860L.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
fx12mm.h
mtd: MTD related config header changes (mtdparts command)
2009-06-12 20:45:47 +02:00
G2000.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
galaxy5200.h
Reset i2c slave devices during init on mpc5xxx cpus
2009-09-06 11:26:04 +02:00
gcplus.h
arm: cleanup remaining CONFIG_INIT_CRITICAL
2009-06-12 20:39:48 +02:00
gdppc440etx.h
ppc4xx: Add GDsys PowerPC 440 ETX board support.
2009-01-26 10:13:30 +01:00
GEN860T.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
GENIETV.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
gr_cpci_ax2000.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
gr_ep2s60.h
stdio/device: rework function naming convention
2009-07-18 00:27:46 +02:00
gr_xc3s_1500.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
grsim_leon2.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
grsim.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
gth2.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
GTH.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
gw8260.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
h2_p2_dbg_board.h
* Code cleanup (ARM mostly)
2004-07-01 16:30:44 +00:00
hammerhead.h
Merge branch 'fixes' into cleanups
2008-12-17 16:53:07 +01:00
hcu4.h
ppc4xx: Update configs for Netstal boards
2008-10-21 17:34:57 +02:00
hcu5.h
ppc4xx: Update configs for Netstal boards
2008-10-21 17:34:57 +02:00
hermes.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
HH405.h
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 15:32:10 +02:00
HIDDEN_DRAGON.h
remove _IO_BASE and KSEG1ADDR from board configuration files
2009-07-11 00:19:16 +02:00
hmi1001.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
HMI10.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
HUB405.h
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 15:32:10 +02:00
hymod.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
IAD210.h
boards: move board_get_enetaddr() into board-specific init
2009-03-20 22:39:12 +01:00
ibf-dsp561.h
Blackfin: unify u-boot linker scripts
2009-06-14 20:01:14 -04:00
IceCube.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
ICU862.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
idmr.h
mtd: MTD related config header changes (mtdparts command)
2009-06-12 20:45:47 +02:00
IDS8247.h
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 15:32:10 +02:00
impa7.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
imx31_litekit.h
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
2009-07-22 22:53:44 -07:00
imx31_phycore.h
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
2009-07-22 22:53:44 -07:00
incaip.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
inka4x0.h
powerpc/inka4x0: Remove left-over ide reset code.
2009-05-15 21:31:24 +02:00
innokom.h
pxa: move serial driver to drivers/serial
2009-06-12 20:39:52 +02:00
integratorap.h
integratorap/cp: use cfi driver
2009-06-23 00:10:04 +02:00
integratorcp.h
integratorap/cp: use cfi driver
2009-06-23 00:10:04 +02:00
IP860.h
8xx, icache: enabling ICache not before running from RAM
2009-03-18 20:48:29 +01:00
IPHASE4539.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ISPAN.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
IVML24.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
IVMS8.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ixdp425.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
ixdpg425.h
arm: timer and interrupt init rework
2009-06-12 20:39:48 +02:00
JSE.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
jupiter.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
KAREF.h
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
2008-11-09 21:38:04 -08:00
katmai.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
kb9202.h
at91rm9200: move serial driver to drivers/serial
2009-04-04 20:42:20 +02:00
keymile-common.h
powerpc: updates for the keymile boards
2009-07-21 00:06:11 +02:00
kilauea.h
ppc4xx: Kilauea: Fix SDRAM init in NAND booting version
2009-07-28 07:23:54 +02:00
km8xx.h
powerpc: updates for the keymile boards
2009-07-21 00:06:11 +02:00
kmeter1.h
83xx, kmeter1: added NAND support
2009-08-26 15:37:02 -05:00
kmsupx4.h
8xx: add support for new keymile kmsupx4 board.
2009-03-18 20:50:05 +01:00
korat.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
KUP4K.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
KUP4X.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
kvme080.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
LANTEC.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
lart.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
linkstation.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
logodl.h
pxa: move serial driver to drivers/serial
2009-06-12 20:39:52 +02:00
lpc2292sodimm.h
arm: cleanup remaining CONFIG_INIT_CRITICAL
2009-06-12 20:39:48 +02:00
lpd7a400-10.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
lpd7a400.h
lh7a40x: move serial driver to drivers/serial
2009-06-12 20:39:53 +02:00
lpd7a404-10.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
lpd7a404.h
lh7a40x: move serial driver to drivers/serial
2009-06-12 20:39:53 +02:00
luan.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
lubbock.h
pxa: move serial driver to drivers/serial
2009-06-12 20:39:52 +02:00
lwmon5.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
lwmon.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
m501sk.h
rm9200 lowevel_init: don't touch reserved/readonly registers
2009-08-03 09:26:26 +02:00
M5208EVBE.h
ColdFire: Add M5208EVB and MCF520x CPU support
2009-07-14 09:27:17 -05:00
M5235EVB.h
unify {CONFIG_,}ENV_IS_EMBEDDED
2009-08-25 12:57:54 +02:00
M5249EVB.h
ColdFire: Modules header files cleanup
2008-11-03 09:45:58 -07:00
M5253DEMO.h
remove _IO_BASE and KSEG1ADDR from board configuration files
2009-07-11 00:19:16 +02:00
M5253EVBE.h
remove _IO_BASE and KSEG1ADDR from board configuration files
2009-07-11 00:19:16 +02:00
M5271EVB.h
Coldfire: M5271EVB: Board header update (dependencies)
2009-02-06 14:54:47 -07:00
M5272C3.h
unify {CONFIG_,}ENV_IS_EMBEDDED
2009-08-25 12:57:54 +02:00
M5275EVB.h
unify {CONFIG_,}ENV_IS_EMBEDDED
2009-08-25 12:57:54 +02:00
M5282EVB.h
ColdFire: Modules header files cleanup
2008-11-03 09:45:58 -07:00
M5329EVB.h
unify {CONFIG_,}ENV_IS_EMBEDDED
2009-08-25 12:57:54 +02:00
M5373EVB.h
unify {CONFIG_,}ENV_IS_EMBEDDED
2009-08-25 12:57:54 +02:00
M5475EVB.h
unify {CONFIG_,}ENV_IS_EMBEDDED
2009-08-25 12:57:54 +02:00
M5485EVB.h
unify {CONFIG_,}ENV_IS_EMBEDDED
2009-08-25 12:57:54 +02:00
M52277EVB.h
unify {CONFIG_,}ENV_IS_EMBEDDED
2009-08-25 12:57:54 +02:00
M53017EVB.h
ColdFire: Update bootargs
2009-07-14 09:46:42 -05:00
M54451EVB.h
unify {CONFIG_,}ENV_IS_EMBEDDED
2009-08-25 12:57:54 +02:00
M54455EVB.h
unify {CONFIG_,}ENV_IS_EMBEDDED
2009-08-25 12:57:54 +02:00
makalu.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
MBX860T.h
ppc: cleanup compiler errors/warnings
2009-03-27 20:23:32 +01:00
MBX.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
mcc200.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
mcu25.h
ppc4xx: Update configs for Netstal boards
2008-10-21 17:34:57 +02:00
mecp5123.h
Remove last remanants of unused CONFIG_I2C_CMD_TREE
2009-07-20 23:54:57 +02:00
mecp5200.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
meesc.h
NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 21:56:15 +02:00
METROBOX.h
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
2008-11-09 21:38:04 -08:00
mgcoge.h
powerpc: updates for the keymile boards
2009-07-21 00:06:11 +02:00
mgsuvd.h
8xx, mgsuvd: rename board to a more generic name
2009-03-18 20:50:04 +01:00
MHPC.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
microblaze-generic.h
mtd: MTD related config header changes (mtdparts command)
2009-06-12 20:45:47 +02:00
MigoR.h
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
2009-07-08 11:43:16 +09:00
mimc200.h
Add LCD support to MIMC200 board
2009-07-26 13:14:33 +02:00
MIP405.h
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
2009-07-19 00:38:23 +02:00
ml300.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ml507.h
ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
2008-10-31 10:31:02 +01:00
ML2.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
modnet50.h
netarm: move serial driver to drivers/serial
2009-03-29 23:01:41 +02:00
motionpro.h
mtd: MTD related config header changes (mtdparts command)
2009-06-12 20:45:47 +02:00
MOUSSE.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
mp2usb.h
rm9200 lowevel_init: don't touch reserved/readonly registers
2009-08-03 09:26:26 +02:00
mpc5121ads.h
mpc5121ads: add JFFS2 and MTDPARTS support; adjust flash map
2009-07-14 00:02:49 +02:00
mpc7448hpc2.h
remove _IO_BASE and KSEG1ADDR from board configuration files
2009-07-11 00:19:16 +02:00
MPC86xADS.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
MPC832XEMDS.h
mpc83xx: accommodate larger kernel sizes by default
2009-08-21 17:11:44 -05:00
MPC837XEMDS.h
mpc83xx: accommodate larger kernel sizes by default
2009-08-21 17:11:44 -05:00
MPC837XERDB.h
mpc83xx: accommodate larger kernel sizes by default
2009-08-21 17:11:44 -05:00
MPC885ADS.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
MPC8260ADS.h
MPC8260ADS: Add nfsboot/ramboot to default environment.
2009-04-04 23:29:40 +02:00
MPC8266ADS.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
MPC8313ERDB.h
mpc83xx: accommodate larger kernel sizes by default
2009-08-21 17:11:44 -05:00
MPC8315ERDB.h
mpc83xx: accommodate larger kernel sizes by default
2009-08-21 17:11:44 -05:00
MPC8323ERDB.h
mpc83xx: accommodate larger kernel sizes by default
2009-08-21 17:11:44 -05:00
MPC8349EMDS.h
mpc83xx: match dtb filename references to their dts equivalents in the linux kernel
2009-08-26 21:28:55 -05:00
MPC8349ITX.h
mpc83xx: mpc8349itx - accommodate larger kernel sizes & unzero the bootdelay
2009-08-26 21:28:55 -05:00
MPC8360EMDS.h
mpc83xx: accommodate larger kernel sizes by default
2009-08-21 17:11:44 -05:00
MPC8360ERDK.h
mpc83xx: match dtb filename references to their dts equivalents in the linux kernel
2009-08-26 21:28:55 -05:00
MPC8536DS.h
85xx: Fix memory test range on MPC8536DS
2009-08-28 17:12:40 -05:00
MPC8540ADS.h
85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
2009-07-21 09:02:40 -05:00
MPC8540EVAL.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
MPC8541CDS.h
85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
2009-07-21 09:02:40 -05:00
MPC8544DS.h
85xx: Removed BEDBUG support from FSL 85xx boards
2009-08-10 16:40:55 -05:00
MPC8548CDS.h
85xx: Remove unused CONFIG_CLEAR_LAW0 defines
2009-08-28 17:12:37 -05:00
MPC8555CDS.h
85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
2009-07-21 09:02:40 -05:00
MPC8560ADS.h
85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
2009-07-21 09:02:40 -05:00
MPC8568MDS.h
85xx: Bump up the BOOTMAP to 16M on FSL 85xx boards
2009-07-21 09:02:40 -05:00
MPC8569MDS.h
Update Freescale copyrights to remove "All Rights Reserved"
2009-07-29 09:59:22 +02:00
MPC8572DS.h
8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
2009-08-28 17:12:38 -05:00
MPC8610HPCD.h
8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
2009-08-28 17:12:38 -05:00
MPC8641HPCN.h
8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
2009-08-28 17:12:38 -05:00
mpr2.h
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
2009-07-08 11:43:16 +09:00
ms7720se.h
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
2009-07-08 11:43:16 +09:00
ms7722se.h
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
2009-07-08 11:43:16 +09:00
ms7750se.h
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
2009-07-08 11:43:16 +09:00
muas3001.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
mucmc52.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
munices.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
MUSENKI.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
mv88f6281gtw_ge.h
Marvell MV88F6281GTW_GE Board support
2009-07-18 20:41:42 +02:00
MVBC_P.h
Use common code for Matrix Vision boards
2009-08-28 00:31:23 +02:00
MVBLM7.h
Use common code for Matrix Vision boards
2009-08-28 00:31:23 +02:00
MVBLUE.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
MVS1.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
mx1ads.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
mx1fs2.h
mtd: MTD related config header changes (mtdparts command)
2009-06-12 20:45:47 +02:00
mx31ads.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
mx31pdk.h
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
2009-07-22 22:53:44 -07:00
NC650.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
neo.h
ppc4xx: Add GDSys neo 405EP board support
2008-10-21 17:35:02 +02:00
NETPHONE.h
Fix boards broken after removal of legacy NAND and DoC support
2009-07-19 19:37:24 +02:00
netstal-common.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
netstar.h
NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 21:56:15 +02:00
NETTA2.h
Fix boards broken after removal of legacy NAND and DoC support
2009-07-19 19:37:24 +02:00
NETTA.h
Fix boards broken after removal of legacy NAND and DoC support
2009-07-19 19:37:24 +02:00
NETVIA.h
Fix boards broken after removal of legacy NAND and DoC support
2009-07-19 19:37:24 +02:00
nhk8815.h
arm nomadik: activate defrag choose 4k transfer block size
2009-08-25 13:35:54 -07:00
ns9750dev.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
NSCU.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
NX823.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
o2dnt.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
ocotea.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
OCRTC.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
omap3_beagle.h
omap3: remove typedefs for configuration structs
2009-08-08 11:33:23 +02:00
omap3_evm.h
omap3: remove typedefs for configuration structs
2009-08-08 11:33:23 +02:00
omap3_overo.h
omap3: remove typedefs for configuration structs
2009-08-08 11:33:23 +02:00
omap3_pandora.h
omap3: remove typedefs for configuration structs
2009-08-08 11:33:23 +02:00
omap3_zoom1.h
omap3: remove typedefs for configuration structs
2009-08-08 11:33:23 +02:00
omap3_zoom2.h
omap3: remove typedefs for configuration structs
2009-08-08 11:33:23 +02:00
omap730.h
ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
2008-09-12 02:20:40 +02:00
omap730p2.h
OMAP: rename timer divisor
2009-03-30 18:58:41 +02:00
omap1510.h
ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
2008-09-12 02:20:40 +02:00
omap1510inn.h
arm925t: Fix CONFIG_SYS_HZ to 1000
2009-04-29 21:39:46 +02:00
omap1610h2.h
OMAP: rename timer divisor
2009-03-30 18:58:41 +02:00
omap1610inn.h
OMAP: rename timer divisor
2009-03-30 18:58:41 +02:00
omap2420h4.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
omap5912osk.h
OMAP: rename timer divisor
2009-03-30 18:58:41 +02:00
ORSG.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
OXC.h
unify {CONFIG_,}ENV_IS_EMBEDDED
2009-08-25 12:57:54 +02:00
p3mx.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
p3p440.h
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
2008-11-09 21:38:04 -08:00
P1_P2_RDB.h
85xx: Added PCIe support for P1 P2 RDB
2009-08-28 17:12:46 -05:00
P3G4.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
P2020DS.h
8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
2009-08-28 17:12:38 -05:00
PATI.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
pb1x00.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
PCI405.h
ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
2009-01-26 10:40:42 +01:00
PCI5441.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
PCIPPC2.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
PCIPPC6.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
pcm030.h
board support patch for phyCORE-MPC5200B-tiny
2009-07-10 23:21:32 +02:00
pcs440ep.h
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
2008-11-09 21:38:04 -08:00
pcu_e.h
unify {CONFIG_,}ENV_IS_EMBEDDED
2009-08-25 12:57:54 +02:00
pdnb3.h
NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 21:56:15 +02:00
pf5200.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
PIP405.h
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
2009-07-19 00:38:23 +02:00
PK1C20.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
pleb2.h
pxa: move serial driver to drivers/serial
2009-06-12 20:39:52 +02:00
PLU405.h
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 15:32:10 +02:00
pm9261.h
Update the mtd driver name in bootargs for at91-based boards
2009-08-18 13:51:51 +02:00
pm9263.h
Update the mtd driver name in bootargs for at91-based boards
2009-08-18 13:51:51 +02:00
PM520.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
PM826.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
PM828.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
PM854.h
8xxx: Break out DMA code to a common file
2009-07-01 23:01:51 -05:00
PM856.h
8xxx: Break out DMA code to a common file
2009-07-01 23:01:51 -05:00
PMC405.h
4xx: Remove binary cpld bitstream from PMC405 board
2009-06-12 20:39:46 +02:00
PMC405DE.h
ppc4xx: Add 405EP based PMC405DE board
2009-07-24 06:47:40 +02:00
PMC440.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
PN62.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
PPChameleonEVB.h
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
2009-07-19 00:38:23 +02:00
ppmc7xx.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
ppmc8260.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
purple.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
pxa255_idp.h
pxa: move serial driver to drivers/serial
2009-06-12 20:39:52 +02:00
qemu-mips.h
Refresh LZMA-lib to v4.65
2009-07-22 09:43:27 +02:00
qong.h
serial_mx31: allow it to work with mx27 too and rename to serial_mxc
2009-06-21 16:18:13 +02:00
QS823.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
QS850.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
QS860T.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
quad100hd.h
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 15:32:10 +02:00
quantum.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
r2dplus.h
Merge branch 'master' of /home/wd/git/u-boot/custodians
2009-07-13 23:37:59 +02:00
r7780mp.h
sh: Update pci config for Renesas r7780mp board
2009-07-11 09:03:41 +09:00
R360MPI.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
Rattler.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
RBC823.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
rd6281a.h
arm: rd6281a: Fixed NAND specific warning
2009-08-21 23:26:09 +02:00
redwood.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
rmu.h
rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared
2009-06-10 00:15:11 +02:00
RPXClassic.h
boards: move board_get_enetaddr() into board-specific init
2009-03-20 22:39:12 +01:00
RPXlite_DW.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
RPXlite.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
RPXsuper.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
RRvision.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
rsdproto.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
rsk7203.h
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
2009-07-22 22:53:44 -07:00
sacsng.h
i2c: Update references to individual i2c commands
2009-06-12 20:39:46 +02:00
Sandpoint8240.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
Sandpoint8245.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
sbc405.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
sbc2410x.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
sbc8240.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
sbc8260.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
sbc8349.h
mpc83xx: accommodate larger kernel sizes by default
2009-08-21 17:11:44 -05:00
sbc8548.h
85xx: Remove unused CONFIG_CLEAR_LAW0 defines
2009-08-28 17:12:37 -05:00
sbc8560.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
sbc8641d.h
8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
2009-08-28 17:12:38 -05:00
SBC8540.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
sc3.h
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 15:32:10 +02:00
sc520_cdp.h
Misc sc520 cdp fixups
2009-09-04 21:55:57 +02:00
sc520_spunk_rel.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
sc520_spunk.h
Fixup sc520_spunk board
2009-09-04 21:55:17 +02:00
scb9328.h
Convert DM9000 driver for CONFIG_NET_MULTI
2009-06-15 00:13:55 -07:00
SCM.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
sequoia.h
ppc4xx: Add Sequoia RAM-booting target
2009-06-12 20:39:47 +02:00
sh7763rdp.h
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
2009-07-08 11:43:16 +09:00
sh7785lcr.h
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
2009-07-08 11:43:16 +09:00
shannon.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
sheevaplug.h
arm: Sheevaplug: Fixed NAND specific warning
2009-08-09 23:44:52 +02:00
SIMPC8313.h
mpc83xx: CONFIG_83XX_GENERIC_PCI is now synonymous with CONFIG_PCI; remove the former
2009-07-27 10:17:54 -05:00
SL8245.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
SM850.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
smdk2400.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
smdk2410.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
smdk6400.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
smmaco4.h
mtd: MTD related config header changes (mtdparts command)
2009-06-12 20:45:47 +02:00
SMN42.h
arm: cleanup remaining CONFIG_INIT_CRITICAL
2009-06-12 20:39:48 +02:00
socrates.h
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 15:32:10 +02:00
sorcery.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
spc1920.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
SPD823TS.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
spieval.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
stxgp3.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
stxssa.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
stxxtc.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
suzaku.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
svm_sc8xx.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
SX1.h
arm925t: Fix CONFIG_SYS_HZ to 1000
2009-04-29 21:39:46 +02:00
SXNI855T.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
taihu.h
i2c: Update references to individual i2c commands
2009-06-12 20:39:46 +02:00
taishan.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
TASREG.h
ColdFire: Modules header files cleanup
2008-11-03 09:45:58 -07:00
tb0229.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
TB5200.h
mtd: MTD related config header changes (mtdparts command)
2009-06-12 20:45:47 +02:00
tcm-bf537.h
Blackfin: unify u-boot linker scripts
2009-06-14 20:01:14 -04:00
TK885D.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
TOP860.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
TOP5200.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
Total5200.h
mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c
2009-03-18 20:54:56 +01:00
TQM85xx.h
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
2009-07-19 00:38:23 +02:00
TQM823L.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
TQM823M.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
TQM834x.h
mpc83xx: tqm8349 - remove pci & flash window conflict
2009-08-21 17:11:44 -05:00
TQM850L.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
TQM850M.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
TQM855L.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
TQM855M.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
TQM860L.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
TQM860M.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
TQM862L.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
TQM862M.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
TQM866M.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
TQM885D.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
TQM5200.h
mtd: MTD related config header changes (mtdparts command)
2009-06-12 20:45:47 +02:00
TQM8260.h
TQM8260: fix locations of kernel and ramdisk images in flash
2009-02-17 10:26:38 +01:00
TQM8272.h
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 15:32:10 +02:00
trab.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
trizepsiv.h
xscale: add support for the polaris board
2009-07-06 21:52:58 +02:00
uc100.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
uc101.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
utx8245.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
v5fx30teval.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
v37.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
v38b.h
boards: move board_get_enetaddr() into board-specific init
2009-03-20 22:39:12 +01:00
VCMA9.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
vct.h
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
2009-07-22 22:53:44 -07:00
versatile.h
versatile: update config and merge to cfi flash driver
2009-07-12 21:59:52 +02:00
virtlab2.h
TQM8xx* boards: set larger SMC Rx buffer len
2009-07-28 22:39:04 +02:00
vme8349.h
mpc83xx: accommodate larger kernel sizes by default
2009-08-21 17:11:44 -05:00
VOH405.h
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 15:32:10 +02:00
voiceblue.h
mtd: MTD related config header changes (mtdparts command)
2009-06-12 20:45:47 +02:00
VOM405.h
4xx: Remove binary cpld bitstream from VOM405 board
2009-06-12 20:39:46 +02:00
VoVPN-GW.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
W7OLMC.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
W7OLMG.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
walnut.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
wepep250.h
pxa: move serial driver to drivers/serial
2009-06-12 20:39:52 +02:00
WUH405.h
NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...
2009-07-18 15:32:10 +02:00
xaeniax.h
pxa: move serial driver to drivers/serial
2009-06-12 20:39:52 +02:00
xilinx-ppc405-generic.h
ppc4xx: Generic architecture for xilinx ppc405(v3)
2008-10-24 17:26:09 +02:00
xilinx-ppc405.h
ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
2008-10-31 10:31:02 +01:00
xilinx-ppc440-generic.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
xilinx-ppc440.h
ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
2008-10-31 10:31:02 +01:00
xilinx-ppc.h
mtd: MTD related config header changes (mtdparts command)
2009-06-12 20:45:47 +02:00
xm250.h
pxa: move serial driver to drivers/serial
2009-06-12 20:39:52 +02:00
XPEDITE1000.h
xpedite1k: Move to X-ES vendor directory
2009-07-24 06:42:32 +02:00
XPEDITE5170.h
8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
2009-08-28 17:12:38 -05:00
XPEDITE5200.h
xes: Increase CONFIG_SYS_BOOTM_LEN to 16MB
2009-07-22 10:14:46 -05:00
XPEDITE5370.h
8xxx: Removed CONFIG_NUM_CPUS from 85xx/86xx
2009-08-28 17:12:38 -05:00
xsengine.h
pxa: move serial driver to drivers/serial
2009-06-12 20:39:52 +02:00
yosemite.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
yucca.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
Yukon8220.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
zeus.h
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
2008-11-09 21:38:04 -08:00
ZPC1900.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ZUMA.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
zylonite.h
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
2009-07-19 00:38:23 +02:00