yair/u-boot-tk1-som
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
6cc7ba9ed43106946aa9aa868302aa2faf1d17be
u-boot-tk1-som/include/configs
History
David Brownell 28b00324be dm355 evm support 
Initial U-Boot support for the DaVinci DM355 EVM.  This is a board
from Spectrum Digital.  Board docs include schematic and firmware
for its microcontroller:

  http://c6000.spectrumdigital.com/evmdm355/revd/

Most of the DM355 chip is fully documented by TI, the most notable
exception being the MPEG/JPEG coprocessor (programmable using codecs
available at no cost from TI), which is omitted from its DM335 sibling:

  http://focus.ti.com/docs/prod/folders/print/tms320dm355.html

This version can boot from the on-board DM9000 Ethernet chip, after
being loaded (from NAND, MMC/SD, or UART).  In the near future, NAND
and USB support could be added ... NAND support is being held back
until the support for the 4-bit ECC hardware is ready.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-06-12 20:39:51 +02:00
..
A3000.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
acadia.h
NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
2009-01-23 10:32:51 -06:00
actux1.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
actux2.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
actux3.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
actux4.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
ADCIOP.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
Adder.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
AdderUSB.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ADNPESC1_base_32.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ADNPESC1.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
ads5121.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
ADS860.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
aev.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
afeb9260.h
at91sam9/at91cap: fix CONFIG_SYS_HZ to 1000
2009-04-16 21:30:48 +02:00
Alaska8220.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
alpr.h
NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
2009-01-23 10:32:51 -06:00
amcc-common.h
ppc4xx: Add Sequoia RAM-booting target
2009-06-12 20:39:47 +02:00
AmigaOneG3SE.h
AmigaOneG3SE: Fix CONFIG_CMD_CONSOLE definition
2009-04-28 01:02:35 +02:00
AMX860.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ap325rxa.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
AP1000.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
APC405.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
apollon.h
Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN
2009-05-15 21:43:05 +02:00
AR405.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
armadillo.h
arm: cleanup remaining CONFIG_INIT_CRITICAL
2009-06-12 20:39:48 +02:00
ASH405.h
ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
2009-01-26 10:40:42 +01:00
assabet.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
at91cap9adk.h
at91sam9/at91cap: fix CONFIG_SYS_HZ to 1000
2009-04-16 21:30:48 +02:00
at91rm9200dk.h
at91rm9200: move serial driver to drivers/serial
2009-04-04 20:42:20 +02:00
at91rm9200ek.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
at91sam9rlek.h
at91sam9/at91cap: fix CONFIG_SYS_HZ to 1000
2009-04-16 21:30:48 +02:00
at91sam9260ek.h
at91sam9/at91cap: fix CONFIG_SYS_HZ to 1000
2009-04-16 21:30:48 +02:00
at91sam9261ek.h
Add config option for disabling DM9000-SROM support.
2009-06-08 22:57:21 -07:00
at91sam9263ek.h
at91sam9/at91cap: fix CONFIG_SYS_HZ to 1000
2009-04-16 21:30:48 +02:00
atc.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
atngw100.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
atstk1002.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
atstk1003.h
Merge branch 'fixes' into cleanups
2008-12-17 16:53:07 +01:00
atstk1004.h
Merge branch 'fixes' into cleanups
2008-12-17 16:53:07 +01:00
atstk1006.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
ATUM8548.h
Remove unused CONFIG_ADDR_STREAMING defines
2008-12-14 12:42:42 +01:00
B2.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
BAB7xx.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
bamboo.h
NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
2009-01-23 10:32:51 -06:00
barco.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
BC3450.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
bf518f-ezbrd.h
Blackfin: bf518f-ezbrd: setup portmux for async flash
2009-05-25 22:38:42 -04:00
bf526-ezbrd.h
Blackfin: bf526-ezbrd: new board port
2009-04-02 06:41:42 -04:00
bf527-ezkit.h
Blackfin: bf527-ezkit: fix SPI flash env params
2009-05-06 08:47:31 -04:00
bf533-ezkit.h
Blackfin: unify common ADI board settings
2009-03-24 20:36:22 -04:00
bf533-stamp.h
Blackfin: bf533-stamp: bump up default clocks
2009-03-24 20:36:29 -04:00
bf537-stamp.h
Blackfin: bf537-stamp: increase monitor size
2009-03-24 20:36:30 -04:00
bf538f-ezkit.h
Blackfin: bf538f-ezkit: new board port
2009-04-02 06:41:38 -04:00
bf548-ezkit.h
Blackfin: bf548-ezkit: new board port
2009-04-02 06:41:29 -04:00
bf561-ezkit.h
Blackfin: unify common ADI board settings
2009-03-24 20:36:22 -04:00
bfin_adi_common.h
Blackfin: add clkin_hz= to default kernel command line for ADI boards
2009-03-24 20:36:29 -04:00
BMW.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
bubinga.h
i2c: Update references to individual i2c commands
2009-06-12 20:39:46 +02:00
c2mon.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
CANBT.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
canmb.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
canyonlands.h
NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
2009-01-23 10:32:51 -06:00
CATcenter.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
CCM.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
cerf250.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
cm41xx.h
ks8695: move serial driver to drivers/serial
2009-03-29 23:01:42 +02:00
cm4008.h
ks8695: move serial driver to drivers/serial
2009-03-29 23:01:42 +02:00
cm5200.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
cmc_pu2.h
at91rm9200: move serial driver to drivers/serial
2009-04-04 20:42:20 +02:00
cmi_mpc5xx.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
CMS700.h
4xx: Remove binary cpld bitstream from CMS700 board
2009-06-12 20:39:46 +02:00
cobra5272.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
cogent_common.h
* Patch by Shlomo Kut, 29 Mar 2004:
2004-09-29 11:02:56 +00:00
cogent_mpc8xx.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
cogent_mpc8260.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
CPC45.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
cpci5200.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
CPCI2DP.h
ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
2009-01-26 10:40:42 +01:00
CPCI405.h
ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
2009-01-26 10:40:42 +01:00
CPCI405AB.h
ppc4xx: Abort autoboot only by space key on CPCI405 boards
2009-03-20 22:39:13 +01:00
CPCI405DT.h
ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
2009-01-26 10:40:42 +01:00
CPCI750.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
CPCI4052.h
ppc4xx: Abort autoboot only by space key on CPCI405 boards
2009-03-20 22:39:13 +01:00
CPCIISER4.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
CPU86.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
CPU87.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
cradle.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
CRAYL1.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
csb226.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
csb272.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
csb472.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
csb637.h
at91rm9200: move serial driver to drivers/serial
2009-04-04 20:42:20 +02:00
CU824.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
DASA_SIM.h
ppc4xx: Update TEXT_BASE for DASA_SIM boards
2009-03-20 22:39:13 +01:00
davinci_dm355evm.h
dm355 evm support
2009-06-12 20:39:51 +02:00
davinci_dvevm.h
davinci dm6446evm NAND update
2009-06-12 20:39:49 +02:00
davinci_schmoogie.h
davinci: display correct clock info
2009-06-12 20:39:49 +02:00
davinci_sffsdr.h
davinci: display correct clock info
2009-06-12 20:39:49 +02:00
davinci_sonata.h
davinci: display correct clock info
2009-06-12 20:39:49 +02:00
DB64360.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
DB64460.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
dbau1x00.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
debris.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
delta.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
digsy_mtc.h
Update CHANGELOG, coding style cleanup.
2009-04-05 00:27:57 +02:00
DK1C20_safe_32.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
DK1C20_standard_32.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
DK1C20.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
DK1S10_mtx_ldk_20.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
DK1S10_safe_32.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
DK1S10_standard_32.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
DK1S10.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
dnp1110.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
DP405.h
4xx: Remove binary cpld bitstream from DP405 board
2009-06-12 20:39:47 +02:00
DU405.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
DU440.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
EB+MCF-EV123.h
ColdFire: Modules header files cleanup
2008-11-03 09:45:58 -07:00
ebony.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ELPPC.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
ELPT860.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
eNET.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
ep82xxm.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ep7312.h
arm720t/clps7111: move serial driver to drivers/serial
2009-03-29 23:01:42 +02:00
ep8248.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ep8260.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
EP1C20.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
EP1S10.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
EP1S40.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
EP88x.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ERIC.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
ESTEEM192E.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ETX094.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
evb4510.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
EVB64260.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
eXalion.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
EXBITGEN.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
FADS823.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
FADS850SAR.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
FADS860T.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
favr-32-ezkit.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
FLAGADM.h
8xx, icache: enabling ICache not before running from RAM
2009-03-18 20:48:29 +01:00
FPS850L.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
FPS860L.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
fx12mm.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
G2000.h
ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
2009-01-26 10:40:42 +01:00
gcplus.h
arm: cleanup remaining CONFIG_INIT_CRITICAL
2009-06-12 20:39:48 +02:00
gdppc440etx.h
ppc4xx: Add GDsys PowerPC 440 ETX board support.
2009-01-26 10:13:30 +01:00
GEN860T.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
GENIETV.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
gr_cpci_ax2000.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
gr_ep2s60.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
gr_xc3s_1500.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
grsim_leon2.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
grsim.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
gth2.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
GTH.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
gw8260.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
h2_p2_dbg_board.h
* Code cleanup (ARM mostly)
2004-07-01 16:30:44 +00:00
hammerhead.h
Merge branch 'fixes' into cleanups
2008-12-17 16:53:07 +01:00
hcu4.h
ppc4xx: Update configs for Netstal boards
2008-10-21 17:34:57 +02:00
hcu5.h
ppc4xx: Update configs for Netstal boards
2008-10-21 17:34:57 +02:00
hermes.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
HH405.h
ppc4xx: Use correct io accessors for esd 405/440 boards
2009-03-20 22:39:14 +01:00
HIDDEN_DRAGON.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
hmi1001.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
HMI10.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
HUB405.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
hymod.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
IAD210.h
boards: move board_get_enetaddr() into board-specific init
2009-03-20 22:39:12 +01:00
IceCube.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
ICU862.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
idmr.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
IDS8247.h
ids8247: Remove legacy NAND defines
2009-04-28 01:22:59 +02:00
impa7.h
arm720t/clps7111: move serial driver to drivers/serial
2009-03-29 23:01:42 +02:00
imx31_litekit.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
imx31_phycore.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
incaip.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
inka4x0.h
powerpc/inka4x0: Remove left-over ide reset code.
2009-05-15 21:31:24 +02:00
innokom.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
integratorap.h
arm: cleanup remaining CONFIG_INIT_CRITICAL
2009-06-12 20:39:48 +02:00
integratorcp.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
IP860.h
8xx, icache: enabling ICache not before running from RAM
2009-03-18 20:48:29 +01:00
IPHASE4539.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ISPAN.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
IVML24.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
IVMS8.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ixdp425.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
ixdpg425.h
arm: timer and interrupt init rework
2009-06-12 20:39:48 +02:00
JSE.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
jupiter.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
KAREF.h
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
2008-11-09 21:38:04 -08:00
katmai.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
kb9202.h
at91rm9200: move serial driver to drivers/serial
2009-04-04 20:42:20 +02:00
keymile-common.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
kilauea.h
ppc4xx: Disable POST memory test on NAND-booting Kilauea
2009-04-16 09:12:08 +02:00
km8xx.h
8xx: add support for new keymile kmsupx4 board.
2009-03-18 20:50:05 +01:00
kmeter1.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
kmsupx4.h
8xx: add support for new keymile kmsupx4 board.
2009-03-18 20:50:05 +01:00
korat.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
KUP4K.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
KUP4X.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
kvme080.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
LANTEC.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
lart.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
linkstation.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
logodl.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
lpc2292sodimm.h
arm: cleanup remaining CONFIG_INIT_CRITICAL
2009-06-12 20:39:48 +02:00
lpd7a400-10.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
lpd7a400.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
lpd7a404-10.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
lpd7a404.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
luan.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
lubbock.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
lwmon5.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
lwmon.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
m501sk.h
at91rm9200: move serial driver to drivers/serial
2009-04-04 20:42:20 +02:00
M5235EVB.h
ColdFire: Provide gzip image size V2 & V3 platforms
2009-03-17 15:58:37 -06:00
M5249EVB.h
ColdFire: Modules header files cleanup
2008-11-03 09:45:58 -07:00
M5253DEMO.h
ColdFire: Provide gzip image size V2 & V3 platforms
2009-03-17 15:58:37 -06:00
M5253EVBE.h
ColdFire: Provide gzip image size V2 & V3 platforms
2009-03-17 15:58:37 -06:00
M5271EVB.h
Coldfire: M5271EVB: Board header update (dependencies)
2009-02-06 14:54:47 -07:00
M5272C3.h
ColdFire: Use CFI driver for M5272C3
2008-11-03 09:45:58 -07:00
M5275EVB.h
ColdFire: Provide gzip image size V2 & V3 platforms
2009-03-17 15:58:37 -06:00
M5282EVB.h
ColdFire: Modules header files cleanup
2008-11-03 09:45:58 -07:00
M5329EVB.h
ColdFire: Provide gzip image size V2 & V3 platforms
2009-03-17 15:58:37 -06:00
M5373EVB.h
ColdFire: Provide gzip image size V2 & V3 platforms
2009-03-17 15:58:37 -06:00
M5475EVB.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
M5485EVB.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
M52277EVB.h
ColdFire: Provide gzip image size V2 & V3 platforms
2009-03-17 15:58:37 -06:00
M53017EVB.h
ColdFire: Provide gzip image size V2 & V3 platforms
2009-03-17 15:58:37 -06:00
M54451EVB.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
M54455EVB.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
makalu.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
MBX860T.h
ppc: cleanup compiler errors/warnings
2009-03-27 20:23:32 +01:00
MBX.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
mcc200.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
mcu25.h
ppc4xx: Update configs for Netstal boards
2008-10-21 17:34:57 +02:00
mecp5200.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
METROBOX.h
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
2008-11-09 21:38:04 -08:00
mgcoge.h
powerpc: common updates for keymile boards
2009-03-18 20:49:04 +01:00
mgsuvd.h
8xx, mgsuvd: rename board to a more generic name
2009-03-18 20:50:04 +01:00
MHPC.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
microblaze-generic.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
MigoR.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
mimc200.h
Merge branch 'mimc200' into next
2009-02-23 10:34:39 +01:00
MIP405.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
ml300.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ml507.h
ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
2008-10-31 10:31:02 +01:00
ML2.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
modnet50.h
netarm: move serial driver to drivers/serial
2009-03-29 23:01:41 +02:00
motionpro.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
MOUSSE.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
mp2usb.h
at91rm9200: move serial driver to drivers/serial
2009-04-04 20:42:20 +02:00
mpc7448hpc2.h
mpc7448hpc2: Add CONFIG_SYS_I2C_SPEED define
2009-06-12 20:39:45 +02:00
MPC86xADS.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
MPC832XEMDS.h
83xx: Use common LSDMR defines from asm/fsl_lbc.h
2009-03-30 13:33:49 -05:00
MPC837XEMDS.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
MPC837XERDB.h
mpc83xx: MPC837XERDB: Add PCIe support
2009-02-23 15:52:35 -06:00
MPC885ADS.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
MPC8260ADS.h
MPC8260ADS: Add nfsboot/ramboot to default environment.
2009-04-04 23:29:40 +02:00
MPC8266ADS.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
MPC8313ERDB.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
MPC8315ERDB.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
MPC8323ERDB.h
83xx: Use common LSDMR defines from asm/fsl_lbc.h
2009-03-30 13:33:49 -05:00
MPC8349EMDS.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
MPC8349ITX.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
MPC8360EMDS.h
83xx: Use common LSDMR defines from asm/fsl_lbc.h
2009-03-30 13:33:49 -05:00
MPC8360ERDK.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
MPC8536DS.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
MPC8540ADS.h
85xx: Use common LSDMR defines from asm/fsl_lbc.h
2009-03-30 13:33:49 -05:00
MPC8540EVAL.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
MPC8541CDS.h
85xx: Use common LSDMR defines from asm/fsl_lbc.h
2009-03-30 13:33:49 -05:00
MPC8544DS.h
85xx: Introduce CONFIG_SYS_PCI*_IO_VIRT for FSL boards
2009-01-23 17:03:13 -06:00
MPC8548CDS.h
85xx: Use common LSDMR defines from asm/fsl_lbc.h
2009-03-30 13:33:49 -05:00
MPC8555CDS.h
85xx: Use common LSDMR defines from asm/fsl_lbc.h
2009-03-30 13:33:49 -05:00
MPC8560ADS.h
85xx: Use common LSDMR defines from asm/fsl_lbc.h
2009-03-30 13:33:49 -05:00
MPC8568MDS.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
MPC8569MDS.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
MPC8572DS.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
MPC8610HPCD.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
MPC8641HPCN.h
86xx: Cleanup MP support
2009-04-01 15:29:44 -05:00
mpr2.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
ms7720se.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
ms7722se.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
ms7750se.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
muas3001.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
mucmc52.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
munices.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
MUSENKI.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
MVBC_P.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
MVBLM7.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
MVBLUE.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
MVS1.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
mx1ads.h
imx: move serial driver to drivers/serial
2009-03-30 18:58:38 +02:00
mx1fs2.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
mx31ads.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
NC650.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
neo.h
ppc4xx: Add GDSys neo 405EP board support
2008-10-21 17:35:02 +02:00
NETPHONE.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
netstal-common.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
netstar.h
arm925t: Fix CONFIG_SYS_HZ to 1000
2009-04-29 21:39:46 +02:00
NETTA2.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
NETTA.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
NETVIA.h
NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
2009-01-23 10:32:51 -06:00
nmdk8815.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
ns9750dev.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
NSCU.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
NX823.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
o2dnt.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
ocotea.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
OCRTC.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
omap3_beagle.h
OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000
2009-04-30 23:56:01 +02:00
omap3_evm.h
OMAP3EVM: Set default bootfile
2009-06-12 20:39:51 +02:00
omap3_overo.h
OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000
2009-04-30 23:56:01 +02:00
omap3_pandora.h
OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000
2009-04-30 23:56:01 +02:00
omap3_zoom1.h
ZOOM1 Remove more legacy NAND defines.
2009-06-12 20:39:49 +02:00
omap3_zoom2.h
ZOOM2 Add initial support for Zoom2
2009-06-12 20:39:50 +02:00
omap730.h
ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
2008-09-12 02:20:40 +02:00
omap730p2.h
OMAP: rename timer divisor
2009-03-30 18:58:41 +02:00
omap1510.h
ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
2008-09-12 02:20:40 +02:00
omap1510inn.h
arm925t: Fix CONFIG_SYS_HZ to 1000
2009-04-29 21:39:46 +02:00
omap1610h2.h
OMAP: rename timer divisor
2009-03-30 18:58:41 +02:00
omap1610inn.h
OMAP: rename timer divisor
2009-03-30 18:58:41 +02:00
omap2420h4.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
omap5912osk.h
OMAP: rename timer divisor
2009-03-30 18:58:41 +02:00
ORSG.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
OXC.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
p3mx.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
p3p440.h
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
2008-11-09 21:38:04 -08:00
P3G4.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
PATI.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
pb1x00.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
PCI405.h
ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
2009-01-26 10:40:42 +01:00
PCI5441.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
PCIPPC2.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
PCIPPC6.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
pcs440ep.h
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
2008-11-09 21:38:04 -08:00
pcu_e.h
8xx, icache: enabling ICache not before running from RAM
2009-03-18 20:48:29 +01:00
pdnb3.h
arm: timer and interrupt init rework
2009-06-12 20:39:48 +02:00
pf5200.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
PIP405.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
PK1C20.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
pleb2.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
PLU405.h
ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
2009-01-26 10:40:42 +01:00
pm9263.h
at91sam9/at91cap: fix CONFIG_SYS_HZ to 1000
2009-04-16 21:30:48 +02:00
PM520.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
PM826.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
PM828.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
PM854.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
PM856.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
PMC405.h
4xx: Remove binary cpld bitstream from PMC405 board
2009-06-12 20:39:46 +02:00
PMC440.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
PN62.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
PPChameleonEVB.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
ppmc7xx.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
ppmc8260.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
purple.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
pxa255_idp.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
qemu-mips.h
MIPS: qemu_mips: move env storage just after u-boot
2008-12-17 22:27:27 +09:00
qong.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
QS823.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
QS850.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
QS860T.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
quad100hd.h
NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
2009-01-23 10:32:51 -06:00
quantum.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
r2dplus.h
sh: Fix cannot work rtl8139 on r2dplus
2009-03-12 23:58:30 +09:00
r7780mp.h
sh: Add some register value configurable to PCI of SH7780
2009-03-12 23:58:30 +09:00
R360MPI.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
Rattler.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
RBC823.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
redwood.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
rmu.h
rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared
2009-06-10 00:15:11 +02:00
RPXClassic.h
boards: move board_get_enetaddr() into board-specific init
2009-03-20 22:39:12 +01:00
RPXlite_DW.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
RPXlite.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
RPXsuper.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
RRvision.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
rsdproto.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
rsk7203.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
sacsng.h
i2c: Update references to individual i2c commands
2009-06-12 20:39:46 +02:00
Sandpoint8240.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
Sandpoint8245.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
sbc405.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
sbc2410x.h
Fix e-mail address of Gary Jennejohn.
2009-05-15 22:11:59 +02:00
sbc8240.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
sbc8260.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
sbc8349.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
sbc8548.h
85xx: Use common LSDMR defines from asm/fsl_lbc.h
2009-03-30 13:33:49 -05:00
sbc8560.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
sbc8641d.h
86xx: Cleanup MP support
2009-04-01 15:29:44 -05:00
SBC8540.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
sc3.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
sc520_cdp.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
sc520_spunk_rel.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
sc520_spunk.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
scb9328.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
SCM.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
sequoia.h
ppc4xx: Add Sequoia RAM-booting target
2009-06-12 20:39:47 +02:00
sh7763rdp.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
sh7785lcr.h
sh: Add support 32-Bit Extended Address Mode to sh7785lcr
2009-03-12 23:58:30 +09:00
shannon.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
SIMPC8313.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
SL8245.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
SM850.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
smdk2400.h
Fix e-mail address of Gary Jennejohn.
2009-05-15 22:11:59 +02:00
smdk2410.h
Fix e-mail address of Gary Jennejohn.
2009-05-15 22:11:59 +02:00
smdk6400.h
Fix e-mail address of Gary Jennejohn.
2009-05-15 22:11:59 +02:00
smmaco4.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
SMN42.h
arm: cleanup remaining CONFIG_INIT_CRITICAL
2009-06-12 20:39:48 +02:00
socrates.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
sorcery.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
spc1920.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
SPD823TS.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
spieval.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
stxgp3.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
stxssa.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
stxxtc.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
suzaku.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
svm_sc8xx.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
SX1.h
arm925t: Fix CONFIG_SYS_HZ to 1000
2009-04-29 21:39:46 +02:00
SXNI855T.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
taihu.h
i2c: Update references to individual i2c commands
2009-06-12 20:39:46 +02:00
taishan.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
TASREG.h
ColdFire: Modules header files cleanup
2008-11-03 09:45:58 -07:00
tb0229.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
TB5200.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
TK885D.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
TOP860.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
TOP5200.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
Total5200.h
mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c
2009-03-18 20:54:56 +01:00
TQM85xx.h
TQM85xx: minor config file cleanup
2009-06-09 23:05:44 +02:00
TQM823L.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
TQM823M.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
TQM834x.h
mpc83xx: don't set SICRH_TSOBI1 to RMII/RTBI operation
2009-06-08 10:45:09 -05:00
TQM850L.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
TQM850M.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
TQM855L.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
TQM855M.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
TQM860L.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
TQM860M.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
TQM862L.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
TQM862M.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
TQM866M.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
TQM885D.h
Enable ext2 support for TQM8xxL/M based boards
2009-02-21 21:51:21 +01:00
TQM5200.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
TQM8260.h
TQM8260: fix locations of kernel and ramdisk images in flash
2009-02-17 10:26:38 +01:00
TQM8272.h
NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
2009-01-23 10:32:51 -06:00
trab.h
Fix e-mail address of Gary Jennejohn.
2009-05-15 22:11:59 +02:00
trizepsiv.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
uc100.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
uc101.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
utx8245.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
v5fx30teval.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
v37.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
v38b.h
boards: move board_get_enetaddr() into board-specific init
2009-03-20 22:39:12 +01:00
VCMA9.h
Fix e-mail address of Gary Jennejohn.
2009-05-15 22:11:59 +02:00
vct.h
mips/vcth: Use generic 16550 uart driver
2009-04-28 01:10:24 +02:00
versatile.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
virtlab2.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
VOH405.h
ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files
2009-01-26 10:40:42 +01:00
voiceblue.h
arm925t: Fix CONFIG_SYS_HZ to 1000
2009-04-29 21:39:46 +02:00
VOM405.h
4xx: Remove binary cpld bitstream from VOM405 board
2009-06-12 20:39:46 +02:00
VoVPN-GW.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
W7OLMC.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
W7OLMG.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
walnut.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
wepep250.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
WUH405.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
xaeniax.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
xilinx-ppc405-generic.h
ppc4xx: Generic architecture for xilinx ppc405(v3)
2008-10-24 17:26:09 +02:00
xilinx-ppc405.h
ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
2008-10-31 10:31:02 +01:00
xilinx-ppc440-generic.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
xilinx-ppc440.h
ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
2008-10-31 10:31:02 +01:00
xilinx-ppc.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
xm250.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
XPEDITE1K.h
boards: move board_get_enetaddr() into board-specific init
2009-03-20 22:39:12 +01:00
XPEDITE5200.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
XPEDITE5370.h
i2c: Remove deprecated individual i2c commands
2009-06-12 20:39:46 +02:00
xsengine.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
yosemite.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
yucca.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
Yukon8220.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
zeus.h
Changed PPC4xx EMAC driver to require CONFIG_PPC4xx_EMAC
2008-11-09 21:38:04 -08:00
ZPC1900.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ZUMA.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
zylonite.h
arm: clean cache management
2009-04-05 13:06:31 +02:00