Files
u-boot-tk1-som/include
Peng Fan a511a3e0e8 imx:mx6sxsabresd add board level support for usb
Add pinmux settings, implement board_ehci_hcd_init, board_usb_phy_mode

There are two usb port on mx6sxsabresd board:
1. otg port
2. host port
The following are the connection between usb controller and board usb
interface, host port has not ID pin set:
otg1 core <---> board otg port
otg2 core <---> board host port
In order to make host port work, board_usb_phy_mode return USB_INIT_HOST
to make host port work in HOST mode.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Ye Li <B37916@freescale.com>
2014-11-14 20:58:19 +01:00
..
2014-10-27 14:35:55 +01:00
2014-07-30 08:48:03 -04:00
2014-07-18 19:42:16 +01:00
2014-07-18 19:42:10 +01:00
2014-11-13 14:49:01 +01:00
2014-02-04 16:32:20 +01:00
2014-10-27 14:35:55 +01:00
2014-02-21 08:42:47 -05:00
2014-05-27 10:21:32 -04:00
2014-06-21 10:06:58 -06:00
2014-10-06 17:34:40 +02:00
2014-10-25 15:27:36 -04:00
2014-08-09 11:16:57 -04:00
2014-08-09 11:16:57 -04:00
2014-10-23 06:54:03 -04:00
2014-08-09 11:16:57 -04:00
2014-07-07 19:47:18 -04:00
2014-06-19 11:18:55 -04:00
2014-02-20 06:48:23 +01:00
2013-09-24 09:10:33 -04:00
2014-10-25 15:27:37 -04:00
2014-05-28 10:58:19 +09:00
2014-06-20 11:54:29 -06:00
2014-10-22 16:56:41 -06:00
2013-09-20 10:30:54 -04:00
2014-10-25 15:27:37 -04:00
2014-05-30 14:03:24 -04:00
2013-11-09 17:21:01 +01:00
2014-08-01 18:44:56 +03:00
2014-03-17 20:05:49 -06:00
2014-10-27 14:35:55 +01:00
2014-10-22 10:36:50 -06:00
2014-10-22 10:36:46 -06:00
2014-10-27 17:54:03 -04:00
2014-10-27 14:35:55 +01:00
2014-06-11 16:27:06 -04:00
2013-12-04 08:11:28 -05:00