Matthias Fuchs 632e9b671e ppc4xx: Set default PCI device ID for 405EP boards ...

Current code only sets the PCI vendor id to 0x1014 and
leaved device id to 0x0000.

Ths patch ....
a) uses the correct PCI_VENDOR_ID_IBM macro for this
b) sets the default device ID as stated in the UM to 0x0156
   by using PCI_DEVICE_ID_IBM_405GP for this.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>

2009-07-10 08:26:11 +02:00

..

4xx_ibm_ddr2_autocalib.c

ppc4xx: Autocalibration can set RDCC to over aggressive value.

2009-02-12 06:08:07 +01:00

4xx_pci.c

ppc4xx: Set default PCI device ID for 405EP boards

2009-07-10 08:26:11 +02:00

4xx_pcie.c

ppc4xx: PCIe: Change 16GB inbound memory to 4GB

2009-02-18 15:59:20 +01:00

4xx_uart.c

rename CFG_ macros to CONFIG_SYS

2008-10-18 21:54:03 +02:00

40x_spd_sdram.c

i2c.h: Provide a default CONFIG_SYS_I2C_SLAVE value

2009-06-12 20:39:45 +02:00

44x_spd_ddr2.c

4xx: Fix compilation warnings and MQ registers dump in SPD DDR2 code

2009-07-08 10:59:07 +02:00

44x_spd_ddr.c

i2c.h: Provide a default CONFIG_SYS_I2C_SLAVE value

2009-06-12 20:39:45 +02:00

bedbug_405.c

Standardize command usage messages with cmd_usage()

2009-01-28 08:43:45 +01:00

cache.S

rename CFG_ macros to CONFIG_SYS

2008-10-18 21:54:03 +02:00

commproc.c

rename CFG_ macros to CONFIG_SYS

2008-10-18 21:54:03 +02:00

config.mk

cpu/ppc4xx/config.mk: Make a needlessly deffered expansion immediate.

2008-02-23 09:44:54 +01:00

cpu_init.c

ppc4xx: Move 405EP pci code from cpu_init_f() to __pci_pre_init()

2009-07-10 08:26:03 +02:00

cpu.c

ppc4xx: Remove compilation warning "pci_async_enabled defined but not used"

2009-07-08 10:59:07 +02:00

dcr.S

cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.

2007-07-10 10:27:39 -05:00

denali_data_eye.c

rename CFG_ macros to CONFIG_SYS

2008-10-18 21:54:03 +02:00

denali_spd_ddr2.c

rename CFG_ macros to CONFIG_SYS

2008-10-18 21:54:03 +02:00

ecc.c

rename CFG_ macros to CONFIG_SYS

2008-10-18 21:54:03 +02:00

ecc.h

rename CFG_ macros to CONFIG_SYS

2008-10-18 21:54:03 +02:00

fdt.c

ppc4xx: Only fixup opb attached UARTs

2009-02-06 10:53:15 +01:00

gpio.c

rename CFG_ macros to CONFIG_SYS

2008-10-18 21:54:03 +02:00

i2c.c

i2c: Create common default i2c_[set|get]_bus_speed() functions

2009-06-12 20:39:45 +02:00

interrupts.c

ppc4xx: Minor coding style cleanup of Xilinx Virtex5 ml507 support

2008-07-18 12:31:25 +02:00

iop480_uart.c

ppc4xx: Consolidate PPC4xx UIC defines

2008-07-11 13:18:13 +02:00

kgdb.S

Big white-space cleanup.

2008-05-21 00:14:08 +02:00

Makefile

Moved PPC4xx EMAC driver to drivers/net

2008-11-09 21:38:04 -08:00

miiphy.c

Cleanup: fix "MHz" spelling

2008-10-21 11:25:39 +02:00

ndfc.c

ppc4xx: Fix problem with ECC ordering for PPC4xx NDFC platforms

2009-05-23 12:51:39 +02:00

resetvec.S

* Code cleanup:

2003-06-27 21:31:46 +00:00

sdram.c

ppc4xx: Improve DDR autodetect

2009-01-26 10:13:11 +01:00

sdram.h

rename CFG_ macros to CONFIG_SYS

2008-10-18 21:54:03 +02:00

speed.c

Cleanup: fix "MHz" spelling

2008-10-21 11:25:39 +02:00

start.S

ppc4xx: Make pll_write global

2009-07-08 10:59:07 +02:00

tlb.c

ppc4xx: Fix printf format warnings now visible with the updated format check

2008-07-10 09:58:06 +02:00

traps.c

ppc4xx: Fix printf format warnings now visible with the updated format check

2008-07-10 09:58:06 +02:00

uic.c

ppc4xx: Fixed PPC4xx debug compilation error in uic.c

2009-07-08 10:59:07 +02:00

usb_ohci.c

Fix e-mail address of Gary Jennejohn.

2009-05-15 22:11:59 +02:00

usb_ohci.h

Replace __attribute references with __attribute__

2009-04-28 01:01:39 +02:00

usb.c

rename CFG_ macros to CONFIG_SYS

2008-10-18 21:54:03 +02:00

usbdev.c

ppc4xx: Consolidate PPC4xx UIC defines

2008-07-11 13:18:14 +02:00

usbdev.h

rename CFG_ macros to CONFIG_SYS

2008-10-18 21:54:03 +02:00

xilinx_irq.c

ppc4xx: CPU PPC440x5 on Virtex5 FX

2008-07-18 12:30:50 +02:00