yair/u-boot-tk1-som
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
ba9a11e4ea27d43bfc3d9f1787117fe4826b3ce7
u-boot-tk1-som/include/configs
History
Steve Sakoman 5af3246034 ARMV7: OMAP: Add mpurate boot arg for Overo and Beagle 
Allows one to set the processor clock rate via "setenv mpurate 720" for example

Default is set to a "safe" 500 Mhz.

Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-09-08 14:50:33 -04:00
..
manroland
configs: remove unused CONFIG_COMMAND_HISTORY
2010-05-04 23:38:50 +02:00
a320evb.h
arm: A320: Add support for Faraday A320 evaluation board
2009-11-27 16:26:17 -06:00
A3000.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
acadia.h
common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
2009-12-08 22:14:07 +01:00
actux1.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
actux2.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
actux3.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
actux4.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
ADCIOP.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
Adder.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
AdderUSB.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ADS860.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
aev.h
mpc5xxx: Remove all references to MGT5100
2010-03-21 22:44:42 +01:00
afeb9260.h
ARM change name of defines for AT91 arm926ejs
2010-03-07 12:36:35 -06:00
Alaska8220.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
alpr.h
ppc4xx: alpr: Remove some not needed commands to make image fit again
2010-04-14 10:26:28 +02:00
am3517_evm.h
AM3517EVM: musb: add usb config
2010-08-12 16:40:00 +02:00
amcc-common.h
ppc4xx: cleanup default environment for AMCC boards
2010-08-09 16:02:05 +02:00
AMX860.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ap325rxa.h
ide: add configuration
2010-08-08 05:17:05 +05:30
AP1000.h
configs: remove unused CONFIG_COMMAND_HISTORY
2010-05-04 23:38:50 +02:00
APC405.h
ppc4xx: Fix APC405 board support
2010-09-03 11:14:13 +02:00
apollon.h
Remove superfluous uses of V_PROMPT macro.
2010-01-04 08:48:16 -06:00
AR405.h
ppc4xx: Fix building of AR405 board
2010-08-09 16:04:59 +02:00
aria.h
mpc5121: determine RAM size using get_ram_size()
2010-04-24 22:56:35 +02:00
armadillo.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
ASH405.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
assabet.h
LAN91C96: Enable NET_MULTI LAN driver
2009-12-13 21:31:26 -08:00
astro_mcf5373l.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
at91cap9adk.h
ARM change name of defines for AT91 arm926ejs
2010-03-07 12:36:35 -06:00
at91rm9200dk.h
add new CONFIG_AT91_LEGACY
2010-02-12 12:31:54 -06:00
at91rm9200ek.h
add new CONFIG_AT91_LEGACY
2010-02-12 12:31:54 -06:00
at91sam9m10g45ek.h
ARM change name of defines for AT91 arm926ejs
2010-03-07 12:36:35 -06:00
at91sam9rlek.h
ARM change name of defines for AT91 arm926ejs
2010-03-07 12:36:35 -06:00
at91sam9260ek.h
ARM change name of defines for AT91 arm926ejs
2010-03-07 12:36:35 -06:00
at91sam9261ek.h
ARM change name of defines for AT91 arm926ejs
2010-03-07 12:36:35 -06:00
at91sam9263ek.h
ARM change name of defines for AT91 arm926ejs
2010-03-07 12:36:35 -06:00
atc.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
atngw100.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
atstk1002.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
atstk1003.h
Merge branch 'fixes' into cleanups
2008-12-17 16:53:07 +01:00
atstk1004.h
Merge branch 'fixes' into cleanups
2008-12-17 16:53:07 +01:00
atstk1006.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
ATUM8548.h
powerpc/85xx: Move PCI/PCIe address defines into common immap_85xx.h
2010-07-20 04:37:11 -05:00
B2.h
Move lib_$ARCH directories to arch/$ARCH/lib
2010-04-13 09:13:03 +02:00
BAB7xx.h
Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions
2010-06-23 23:24:11 +02:00
bamboo.h
NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS
2009-01-23 10:32:51 -06:00
barco.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
BC3450.h
mpc5xxx: Remove all references to MGT5100
2010-03-21 22:44:42 +01:00
bf518f-ezbrd.h
Blackfin: unify default I2C settings for ADI boards
2010-07-13 17:50:52 -04:00
bf526-ezbrd.h
Blackfin: unify default I2C settings for ADI boards
2010-07-13 17:50:52 -04:00
bf527-ad7160-eval.h
Blackfin: bf527-ad7160-eval: new board support
2010-07-13 17:50:52 -04:00
bf527-ezkit.h
Blackfin: unify default I2C settings for ADI boards
2010-07-13 17:50:52 -04:00
bf533-ezkit.h
Blackfin: bf533/bf561 boards: convert to new soft gpio i2c code
2010-07-25 15:16:21 -04:00
bf533-stamp.h
Blackfin: bf533/bf561 boards: convert to new soft gpio i2c code
2010-07-25 15:16:21 -04:00
bf537-minotaur.h
Blackfin: tweak embedded LDR env config option
2010-01-17 09:17:26 -05:00
bf537-pnav.h
Merge branch 'master' of git://git.denx.de/u-boot-blackfin
2010-07-14 21:54:45 +02:00
bf537-srv1.h
Blackfin: tweak embedded LDR env config option
2010-01-17 09:17:26 -05:00
bf537-stamp.h
Merge branch 'master' of git://git.denx.de/u-boot-blackfin
2010-07-14 21:54:45 +02:00
bf538f-ezkit.h
Blackfin: unify default I2C settings for ADI boards
2010-07-13 17:50:52 -04:00
bf548-ezkit.h
Blackfin: unify default I2C settings for ADI boards
2010-07-13 17:50:52 -04:00
bf561-acvilon.h
Merge branch 'master' of git://git.denx.de/u-boot-blackfin
2010-07-14 21:54:45 +02:00
bf561-ezkit.h
Blackfin: bf533/bf561 boards: convert to new soft gpio i2c code
2010-07-25 15:16:21 -04:00
bfin_adi_common.h
Blackfin: bf533/bf561 boards: convert to new soft gpio i2c code
2010-07-25 15:16:21 -04:00
blackstamp.h
Blackfin: bf533/bf561 boards: convert to new soft gpio i2c code
2010-07-25 15:16:21 -04:00
BMW.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
bubinga.h
i2c: Update references to individual i2c commands
2009-06-12 20:39:46 +02:00
c2mon.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
CANBT.h
ppc4xx: Fix building of CANBT board
2010-08-09 16:05:03 +02:00
canmb.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
canyonlands.h
ppc4xx/Canyonlands added USB board callbacks
2010-07-23 09:53:20 +02:00
CATcenter.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
CCM.h
ppc: Clean up calling of phy_reset() during init
2009-09-22 23:05:29 +02:00
cerf250.h
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
2009-10-04 22:37:03 -07:00
cm41xx.h
ks8695: move serial driver to drivers/serial
2009-03-29 23:01:42 +02:00
cm4008.h
ks8695: move serial driver to drivers/serial
2009-03-29 23:01:42 +02:00
cm5200.h
mtd: MTD related config header changes (mtdparts command)
2009-06-12 20:45:47 +02:00
cm-bf527.h
Blackfin: unify default I2C settings for ADI boards
2010-07-13 17:50:52 -04:00
cm-bf533.h
Blackfin: update tiny board settings (voltage/default env)
2010-01-17 09:17:26 -05:00
cm-bf537e.h
Blackfin: unify default I2C settings for ADI boards
2010-07-13 17:50:52 -04:00
cm-bf537u.h
Blackfin: unify default I2C settings for ADI boards
2010-07-13 17:50:52 -04:00
cm-bf548.h
Blackfin: cm-bf548: increase monitor len
2010-08-11 11:29:14 -04:00
cm-bf561.h
Blackfin: cm-bf561: update network/env settings
2010-04-07 01:10:34 -04:00
cmc_pu2.h
add new CONFIG_AT91_LEGACY
2010-02-12 12:31:54 -06:00
cmi_mpc5xx.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
CMS700.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
cobra5272.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
cogent_common.h
* Patch by Shlomo Kut, 29 Mar 2004:
2004-09-29 11:02:56 +00:00
cogent_mpc8xx.h
ppc: Clean up calling of misc_init_r() during init
2009-09-22 23:04:44 +02:00
cogent_mpc8260.h
ppc: Clean up calling of misc_init_r() during init
2009-09-22 23:04:44 +02:00
colibri_pxa270.h
PXA: Toradex Colibri PXA270 support
2010-07-14 23:27:48 +02:00
corenet_ds.h
powerpc/8xxx: Fix quad-rank DIMMs support on corenet_ds board.
2010-08-19 02:06:14 -05:00
CPC45.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
cpci5200.h
mpc5xxx: Remove all references to MGT5100
2010-03-21 22:44:42 +01:00
CPCI2DP.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
CPCI405.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
CPCI405AB.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
CPCI405DT.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
CPCI750.h
Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions
2010-06-23 23:24:11 +02:00
CPCI4052.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
CPCIISER4.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
cpu9260.h
ARM change name of defines for AT91 arm926ejs
2010-03-07 12:36:35 -06:00
CPU86.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
CPU87.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
cpuat91.h
cpuat91: unbreak ethernet
2010-07-12 00:14:29 -07:00
cradle.h
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
2009-10-04 22:37:03 -07:00
CRAYL1.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
csb226.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
csb272.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
csb472.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
csb637.h
add new CONFIG_AT91_LEGACY
2010-02-12 12:31:54 -06:00
CU824.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
da830evm.h
DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files
2010-06-22 10:24:43 -04:00
da850evm.h
TI: DaVinci: Add board specific code for da850 EVM
2010-06-10 12:04:42 -04:00
DASA_SIM.h
ppc4xx: Update TEXT_BASE for DASA_SIM boards
2009-03-20 22:39:13 +01:00
davinci_dm355evm.h
Davinci: Configurable NAND chip selects
2010-01-04 08:48:17 -06:00
davinci_dm355leopard.h
Davinci: Configurable NAND chip selects
2010-01-04 08:48:17 -06:00
davinci_dm365evm.h
DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files
2010-06-22 10:24:43 -04:00
davinci_dm6467evm.h
Davinci: Configurable NAND chip selects
2010-01-04 08:48:17 -06:00
davinci_dvevm.h
DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files
2010-06-22 10:24:43 -04:00
davinci_schmoogie.h
DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files
2010-06-22 10:24:43 -04:00
davinci_sffsdr.h
DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files
2010-06-22 10:24:43 -04:00
davinci_sonata.h
DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config files
2010-06-22 10:24:43 -04:00
DB64360.h
Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions
2010-06-23 23:24:11 +02:00
DB64460.h
Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions
2010-06-23 23:24:11 +02:00
dbau1x00.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
debris.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
delta.h
common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
2009-12-08 22:14:07 +01:00
devkit8000.h
ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7
2010-07-05 19:59:55 -04:00
digsy_mtc.h
digsy_mtc: Add TCR register value for RTC (DS1339)
2009-09-24 00:21:06 +02:00
dlvision.h
ppc4xx: Add DL-Vision 405EP board support
2009-07-24 06:42:31 +02:00
dnp1110.h
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
2009-10-04 22:37:03 -07:00
DP405.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
DU405.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
DU440.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
eb_cpux9k2.h
new board (eb_cpux9k2)
2010-02-12 12:36:04 -06:00
EB+MCF-EV123.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
ebony.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
edb93xx.h
Add support for EDB93xx boards
2010-02-12 12:31:54 -06:00
edminiv2.h
edminiv2: add I2C support using mvtwsi driver
2010-08-30 14:10:45 +02:00
ELPPC.h
Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions
2010-06-23 23:24:11 +02:00
ELPT860.h
ppc: Clean up calling of phy_reset() during init
2009-09-22 23:05:29 +02:00
eNET.h
eNET: Implement eNET Watchdog
2010-05-06 00:20:04 +02:00
ep82xxm.h
net ppc: fix ethernet device names with spaces
2010-08-09 11:52:28 -07:00
ep7312.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
ep8248.h
Update all board to support new bbmiiphy driver (with multibus support)
2009-10-10 23:16:55 -07:00
ep8260.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
EP88x.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ERIC.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
espt.h
sh: Add support ESPT-GIGA borad
2009-07-11 09:02:21 +09:00
ESTEEM192E.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ETX094.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
evb4510.h
arm: clean cache management
2009-04-05 13:06:31 +02:00
EVB64260.h
Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions
2010-06-23 23:24:11 +02:00
eXalion.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
EXBITGEN.h
Enable CONFIG_NET_MULTI on all remaining PPC4xx boards
2009-06-12 20:39:47 +02:00
FADS823.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
FADS850SAR.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
FADS860T.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
favr-32-ezkit.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
FLAGADM.h
8xx, icache: enabling ICache not before running from RAM
2009-03-18 20:48:29 +01:00
FPS850L.h
TQM8xx: enable device tree support on all TQM8xx based boards.
2010-03-12 00:06:07 +01:00
FPS860L.h
TQM8xx: enable device tree support on all TQM8xx based boards.
2010-03-12 00:06:07 +01:00
fx12mm.h
mtd: MTD related config header changes (mtdparts command)
2009-06-12 20:45:47 +02:00
G2000.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
galaxy5200.h
Move arch/ppc to arch/powerpc
2010-04-21 23:42:38 +02:00
gcplus.h
LAN91C96: Enable NET_MULTI LAN driver
2009-12-13 21:31:26 -08:00
gdppc440etx.h
ppc4xx: Add GDsys PowerPC 440 ETX board support.
2009-01-26 10:13:30 +01:00
GEN860T.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
GENIETV.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
gr_cpci_ax2000.h
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
2009-10-04 22:37:03 -07:00
gr_ep2s60.h
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
2009-10-04 22:37:03 -07:00
gr_xc3s_1500.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
grsim_leon2.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
grsim.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
gth2.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
guruplug.h
mvgbe: support SoCs other than kirkwood
2010-07-12 23:40:31 -07:00
gw8260.h
Update all board to support new bbmiiphy driver (with multibus support)
2009-10-10 23:16:55 -07:00
h2_p2_dbg_board.h
* Code cleanup (ARM mostly)
2004-07-01 16:30:44 +00:00
hammerhead.h
Merge branch 'fixes' into cleanups
2008-12-17 16:53:07 +01:00
hcu4.h
ppc4xx: Update configs for Netstal boards
2008-10-21 17:34:57 +02:00
hcu5.h
ppc4xx: Update configs for Netstal boards
2008-10-21 17:34:57 +02:00
hermes.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
HH405.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
HIDDEN_DRAGON.h
remove _IO_BASE and KSEG1ADDR from board configuration files
2009-07-11 00:19:16 +02:00
hmi1001.h
mpc5xxx: Remove all references to MGT5100
2010-03-21 22:44:42 +01:00
HMI10.h
TQM8xx: enable device tree support on all TQM8xx based boards.
2010-03-12 00:06:07 +01:00
HUB405.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
hymod.h
Update all board to support new bbmiiphy driver (with multibus support)
2009-10-10 23:16:55 -07:00
IAD210.h
boards: move board_get_enetaddr() into board-specific init
2009-03-20 22:39:12 +01:00
ibf-dsp561.h
Blackfin: bf533/bf561 boards: convert to new soft gpio i2c code
2010-07-25 15:16:21 -04:00
IceCube.h
mpc5xxx: Remove all references to MGT5100
2010-03-21 22:44:42 +01:00
icon.h
ppc4xx: icon: add support for SM502 chip
2010-06-17 23:12:15 +02:00
ICU862.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
idmr.h
net ppc: fix ethernet device names with spaces
2010-08-09 11:52:28 -07:00
IDS8247.h
common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
2009-12-08 22:14:07 +01:00
impa7.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
imx27lite-common.h
arm, i.mx27: add support for magnesium board from projectiondesign
2010-04-30 05:23:23 -05:00
imx27lite.h
arm, i.mx27: add support for magnesium board from projectiondesign
2010-04-30 05:23:23 -05:00
imx31_litekit.h
MX: RTC13783 uses general function to access PMIC
2010-05-05 09:48:41 +02:00
imx31_phycore.h
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
2009-07-22 22:53:44 -07:00
incaip.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
inka4x0.h
mpc5xxx: Remove all references to MGT5100
2010-03-21 22:44:42 +01:00
innokom.h
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
2009-10-04 22:37:03 -07:00
integratorap.h
integratorap/cp: use cfi driver
2009-06-23 00:10:04 +02:00
integratorcp.h
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
2009-10-04 22:37:03 -07:00
intip.h
ppc4xx: Make DDR2 timing for intip more robust
2009-09-23 15:46:02 +02:00
ip04.h
Blackfin: convert plat-nand code to GPIO framework
2010-07-08 16:52:13 -05:00
IP860.h
ppc: Clean up calling of phy_reset() during init
2009-09-22 23:05:29 +02:00
ipek01.h
mpc5xxx: Remove all references to MGT5100
2010-03-21 22:44:42 +01:00
IPHASE4539.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
ISPAN.h
Update all board to support new bbmiiphy driver (with multibus support)
2009-10-10 23:16:55 -07:00
IVML24.h
ppc: Clean up calling of phy_reset() during init
2009-09-22 23:05:29 +02:00
IVMS8.h
ppc: Clean up calling of phy_reset() during init
2009-09-22 23:05:29 +02:00
ixdp425.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
ixdpg425.h
arm: timer and interrupt init rework
2009-06-12 20:39:48 +02:00
JSE.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
jupiter.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
KAREF.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
katmai.h
ppc4xx: Fix/Update katmai board header
2010-08-09 16:05:37 +02:00
kb9202.h
add new CONFIG_AT91_LEGACY
2010-02-12 12:31:54 -06:00
keymile-common.h
net ppc: fix ethernet device names with spaces
2010-08-09 11:52:28 -07:00
kilauea.h
Move arch/ppc to arch/powerpc
2010-04-21 23:42:38 +02:00
km8xx.h
net ppc: fix ethernet device names with spaces
2010-08-09 11:52:28 -07:00
km_arm.h
suen3: remove CONFIG_HARD_I2C and related defines
2010-08-30 14:10:11 +02:00
kmeter1.h
net: rename "FSL UECx" net interfaces "UECx"
2010-08-09 11:52:29 -07:00
kmsupx4.h
8xx: add support for new keymile kmsupx4 board.
2009-03-18 20:50:05 +01:00
korat.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
KUP4K.h
8xx, kup4k/kup4x: add FDT support
2010-08-09 00:12:00 +02:00
KUP4X.h
8xx, kup4k/kup4x: configuration changes, code cleanup
2010-08-09 00:09:20 +02:00
kvme080.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
LANTEC.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
lart.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
linkstation.h
Move arch/ppc to arch/powerpc
2010-04-21 23:42:38 +02:00
logodl.h
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
2009-10-04 22:37:03 -07:00
lpc2292sodimm.h
arm: cleanup remaining CONFIG_INIT_CRITICAL
2009-06-12 20:39:48 +02:00
lpd7a400-10.h
Fix SMC91111 regression: lpd7a40x build failures
2009-11-09 21:56:18 -08:00
lpd7a400.h
lh7a40x: move serial driver to drivers/serial
2009-06-12 20:39:53 +02:00
lpd7a404-10.h
Fix SMC91111 regression: lpd7a40x build failures
2009-11-09 21:56:18 -08:00
lpd7a404.h
Fix SMC91111 regression: lpd7a40x build failures
2009-11-09 21:56:18 -08:00
luan.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
lubbock.h
LAN91C96: Enable NET_MULTI LAN driver
2009-12-13 21:31:26 -08:00
lwmon5.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
lwmon.h
ppc: Clean up calling of misc_init_r() during init
2009-09-22 23:04:44 +02:00
m501sk.h
add new CONFIG_AT91_LEGACY
2010-02-12 12:31:54 -06:00
M5208EVBE.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
M5235EVB.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
M5249EVB.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
M5253DEMO.h
ColdFire: Fix incorrect M5253DEMO default environment
2010-03-24 11:09:39 -05:00
M5253EVBE.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
M5271EVB.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
M5272C3.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
M5275EVB.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
M5282EVB.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
M5329EVB.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
M5373EVB.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
M5475EVB.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
M5485EVB.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
M52277EVB.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
M53017EVB.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
M54451EVB.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
M54455EVB.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
magnesium.h
arm, i.mx27: add support for magnesium board from projectiondesign
2010-04-30 05:23:23 -05:00
makalu.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
MBX860T.h
ppc: cleanup compiler errors/warnings
2009-03-27 20:23:32 +01:00
MBX.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
mcc200.h
mcc200: fix build error
2009-10-19 09:18:57 +02:00
mcu25.h
ppc4xx: Update configs for Netstal boards
2008-10-21 17:34:57 +02:00
mecp5123.h
mpc5121: determine RAM size using get_ram_size()
2010-04-24 22:56:35 +02:00
mecp5200.h
mpc5xxx: Remove all references to MGT5100
2010-03-21 22:44:42 +01:00
meesc.h
at91: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT
2010-04-03 15:24:27 -05:00
METROBOX.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
mgcoge.h
FDT: remove obsolete OF_CPU and OF_SOC macros.
2009-09-22 22:59:27 +02:00
mgsuvd.h
8xx, mgsuvd: rename board to a more generic name
2009-03-18 20:50:04 +01:00
MHPC.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
microblaze-generic.h
microblaze: Stop stack clobbering in microblaze-generic.
2009-12-08 08:51:42 +01:00
MigoR.h
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
2009-10-04 22:37:03 -07:00
mimc200.h
MIMC200: set default fbmem value
2009-11-22 22:07:17 +01:00
MIP405.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
ml507.h
ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
2008-10-31 10:31:02 +01:00
ML2.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
modnet50.h
netarm: move serial driver to drivers/serial
2009-03-29 23:01:41 +02:00
motionpro.h
mtd: MTD related config header changes (mtdparts command)
2009-06-12 20:45:47 +02:00
MOUSSE.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
mp2usb.h
add new CONFIG_AT91_LEGACY
2010-02-12 12:31:54 -06:00
mpc5121-common.h
mpc5121: add support for PDM360NG board
2010-04-24 22:56:37 +02:00
mpc5121ads.h
mpc5121: determine RAM size using get_ram_size()
2010-04-24 22:56:35 +02:00
mpc7448hpc2.h
Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions
2010-06-23 23:24:11 +02:00
MPC86xADS.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
MPC832XEMDS.h
net: rename "FSL UECx" net interfaces "UECx"
2010-08-09 11:52:29 -07:00
MPC837XEMDS.h
powerpc: Update configs to properly set FSL_ELBC
2010-07-16 10:55:08 -05:00
MPC837XERDB.h
powerpc: Update configs to properly set FSL_ELBC
2010-07-16 10:55:08 -05:00
MPC885ADS.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
MPC8260ADS.h
Update all board to support new bbmiiphy driver (with multibus support)
2009-10-10 23:16:55 -07:00
MPC8266ADS.h
Update all board to support new bbmiiphy driver (with multibus support)
2009-10-10 23:16:55 -07:00
MPC8308RDB.h
MPC8308RDB: minimal support for devboard from Freescale
2010-07-09 16:10:36 -05:00
MPC8313ERDB.h
powerpc: Update configs to properly set FSL_ELBC
2010-07-16 10:55:08 -05:00
MPC8315ERDB.h
powerpc: Update configs to properly set FSL_ELBC
2010-07-16 10:55:08 -05:00
MPC8323ERDB.h
net: rename "FSL UECx" net interfaces "UECx"
2010-08-09 11:52:29 -07:00
MPC8349EMDS.h
mpc83xx: turn on icache in core initialization to improve u-boot boot time
2010-04-22 18:44:56 -05:00
MPC8349ITX.h
mpc83xx: turn on icache in core initialization to improve u-boot boot time
2010-04-22 18:44:56 -05:00
MPC8360EMDS.h
net: rename "FSL UECx" net interfaces "UECx"
2010-08-09 11:52:29 -07:00
MPC8360ERDK.h
net: rename "FSL UECx" net interfaces "UECx"
2010-08-09 11:52:29 -07:00
MPC8536DS.h
powerpc/85xx: configure autocompletion support
2010-08-01 11:18:44 -05:00
MPC8540ADS.h
powerpc/85xx: configure autocompletion support
2010-08-01 11:18:44 -05:00
MPC8540EVAL.h
mpc85xx: Add reginfo command
2010-07-16 10:55:09 -05:00
MPC8541CDS.h
powerpc/85xx: configure autocompletion support
2010-08-01 11:18:44 -05:00
MPC8544DS.h
powerpc/85xx: configure autocompletion support
2010-08-01 11:18:44 -05:00
MPC8548CDS.h
powerpc/85xx: configure autocompletion support
2010-08-01 11:18:44 -05:00
MPC8555CDS.h
powerpc/85xx: configure autocompletion support
2010-08-01 11:18:44 -05:00
MPC8560ADS.h
powerpc/85xx: configure autocompletion support
2010-08-01 11:18:44 -05:00
MPC8568MDS.h
net: rename "FSL UECx" net interfaces "UECx"
2010-08-09 11:52:29 -07:00
MPC8569MDS.h
net: rename "FSL UECx" net interfaces "UECx"
2010-08-09 11:52:29 -07:00
MPC8572DS.h
powerpc/85xx: configure autocompletion support
2010-08-01 11:18:44 -05:00
MPC8610HPCD.h
powerpc/86xx: Move PCI/PCIe address defines into common immap_86xx.h
2010-07-20 04:37:11 -05:00
MPC8641HPCN.h
powerpc/8xxx: Fix bug in memctrl interleaving & bank interleaving on cs0~cs4
2010-07-26 13:16:09 -05:00
mpr2.h
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
2009-07-08 11:43:16 +09:00
ms7720se.h
ide: add configuration
2010-08-08 05:17:05 +05:30
ms7722se.h
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
2009-10-04 22:37:03 -07:00
ms7750se.h
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
2009-07-08 11:43:16 +09:00
muas3001.h
Update all board to support new bbmiiphy driver (with multibus support)
2009-10-10 23:16:55 -07:00
mucmc52.h
mpc5200, mucmc52, uc101: config cleanup
2009-09-25 01:19:17 +02:00
munices.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
MUSENKI.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
mv88f6281gtw_ge.h
mvgbe: support SoCs other than kirkwood
2010-07-12 23:40:31 -07:00
MVBC_P.h
Remove deprecated 'autoscr' command/variables
2009-09-22 23:03:24 +02:00
MVBLM7.h
mpc83xx/mvBLM7: add usb commands and cleanup.
2010-05-07 12:20:15 -05:00
MVBLUE.h
MVBLUE: Remove CONFIG_CMD_IRQ
2009-12-14 21:31:17 +01:00
MVS1.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
MVSMR.h
Add initial support for Matrix Vision mvSMR board based on MPC5200B.
2010-04-10 00:06:05 +02:00
mx1ads.h
Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API
2009-08-25 13:35:54 -07:00
mx1fs2.h
mtd: MTD related config header changes (mtdparts command)
2009-06-12 20:45:47 +02:00
mx31ads.h
MX: RTC13783 uses general function to access PMIC
2010-05-05 09:48:41 +02:00
mx31pdk.h
MX: RTC13783 uses general function to access PMIC
2010-05-05 09:48:41 +02:00
mx51evk.h
Add SPI support to mx51evk board
2010-05-05 09:48:41 +02:00
NC650.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
neo.h
ppc4xx: Add GDSys neo 405EP board support
2008-10-21 17:35:02 +02:00
NETPHONE.h
Fix boards broken after removal of legacy NAND and DoC support
2009-07-19 19:37:24 +02:00
netstal-common.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
netstar.h
netstar.h: do not exceed 80 columns
2010-03-07 12:36:35 -06:00
NETTA2.h
Fix boards broken after removal of legacy NAND and DoC support
2009-07-19 19:37:24 +02:00
NETTA.h
Fix boards broken after removal of legacy NAND and DoC support
2009-07-19 19:37:24 +02:00
NETVIA.h
Fix boards broken after removal of legacy NAND and DoC support
2009-07-19 19:37:24 +02:00
nhk8815.h
common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
2009-12-08 22:14:07 +01:00
nios2-generic.h
nios2: add gpio support to nios2-generic board
2010-05-28 10:56:03 -04:00
ns9750dev.h
Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
2009-03-29 16:04:51 +02:00
NSCU.h
net ppc: fix ethernet device names with spaces
2010-08-09 11:52:28 -07:00
NX823.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
o2dnt.h
mpc5xxx: Remove all references to MGT5100
2010-03-21 22:44:42 +01:00
ocotea.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
OCRTC.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
omap3_beagle.h
ARMV7: OMAP: Add mpurate boot arg for Overo and Beagle
2010-09-08 14:50:33 -04:00
omap3_evm.h
ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7
2010-07-05 19:59:55 -04:00
omap3_overo.h
ARMV7: OMAP: Add mpurate boot arg for Overo and Beagle
2010-09-08 14:50:33 -04:00
omap3_pandora.h
ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7
2010-07-05 19:59:55 -04:00
omap3_sdp3430.h
ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7
2010-07-05 19:59:55 -04:00
omap3_zoom1.h
ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7
2010-07-05 19:59:55 -04:00
omap3_zoom2.h
ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7
2010-07-05 19:59:55 -04:00
omap4_panda.h
ARMV7: Update default environment for OMAP4 boards
2010-08-05 10:11:50 -04:00
omap4_sdp4430.h
ARMV7: Update default environment for OMAP4 boards
2010-08-05 10:11:50 -04:00
omap730.h
ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
2008-09-12 02:20:40 +02:00
omap730p2.h
LAN91C96: Enable NET_MULTI LAN driver
2009-12-13 21:31:26 -08:00
omap1510.h
ARM OMAP : Correct Invalid Timer Register Field Declaration in omap1510.h & omap730.h
2008-09-12 02:20:40 +02:00
omap1510inn.h
LAN91C96: Enable NET_MULTI LAN driver
2009-12-13 21:31:26 -08:00
omap1610h2.h
LAN91C96: Enable NET_MULTI LAN driver
2009-12-13 21:31:26 -08:00
omap1610inn.h
LAN91C96: Enable NET_MULTI LAN driver
2009-12-13 21:31:26 -08:00
omap2420h4.h
Remove superfluous uses of V_PROMPT macro.
2010-01-04 08:48:16 -06:00
omap5912osk.h
LAN91C96: Enable NET_MULTI LAN driver
2009-12-13 21:31:26 -08:00
openrd_base.h
Kirkwood: openrd_base: Added SATA support
2010-08-08 05:17:55 +05:30
ORSG.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
otc570.h
at91: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT
2010-04-03 15:24:27 -05:00
OXC.h
unify {CONFIG_,}ENV_IS_EMBEDDED
2009-08-25 12:57:54 +02:00
p3mx.h
Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions
2010-06-23 23:24:11 +02:00
p3p440.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
P1_P2_RDB.h
powerpc/85xx: configure autocompletion support
2010-08-01 11:18:44 -05:00
P3G4.h
Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions
2010-06-23 23:24:11 +02:00
P1022DS.h
powerpc/85xx: configure autocompletion support
2010-08-01 11:18:44 -05:00
P2020DS.h
powerpc/85xx: configure autocompletion support
2010-08-01 11:18:44 -05:00
P4080DS.h
powerpc/p4080: Add support for the P4080DS board
2010-08-01 11:18:40 -05:00
PATI.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
pb1x00.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
PCI405.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
PCI5441.h
nios2: Set CONFIG_SYS_HZ to 1000 all nios2 boards.
2010-04-02 12:28:41 -04:00
PCIPPC2.h
Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions
2010-06-23 23:24:11 +02:00
PCIPPC6.h
Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions
2010-06-23 23:24:11 +02:00
pcm030.h
board support patch for phyCORE-MPC5200B-tiny
2009-07-10 23:21:32 +02:00
pcs440ep.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
pcu_e.h
ppc: Clean up calling of phy_reset() during init
2009-09-22 23:05:29 +02:00
pdm360ng.h
mpc5121: pdm360ng: add coprocessor POST
2010-04-24 22:56:41 +02:00
pdnb3.h
common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
2009-12-08 22:14:07 +01:00
pf5200.h
mpc5xxx: Remove all references to MGT5100
2010-03-21 22:44:42 +01:00
PIP405.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
PK1C20.h
nios2: Set CONFIG_SYS_HZ to 1000 all nios2 boards.
2010-04-02 12:28:41 -04:00
pleb2.h
LAN91C96: Enable NET_MULTI LAN driver
2009-12-13 21:31:26 -08:00
PLU405.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
pm9g45.h
add new board pm9g45
2010-06-06 08:36:28 -05:00
pm9261.h
pm9261: remove CONFIG_CMD_AUTOSCRIPT
2010-04-30 05:23:22 -05:00
pm9263.h
pm9263 converted to at91 soc access
2010-04-30 05:23:26 -05:00
PM520.h
mpc5xxx: Remove all references to MGT5100
2010-03-21 22:44:42 +01:00
PM826.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
PM828.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
PM854.h
mpc85xx: Add reginfo command
2010-07-16 10:55:09 -05:00
PM856.h
mpc85xx: Add reginfo command
2010-07-16 10:55:09 -05:00
PMC405.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
PMC405DE.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
PMC440.h
ppc4xx: Fix building of PMC440 board
2010-08-09 16:05:07 +02:00
PN62.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
PPChameleonEVB.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
ppmc7xx.h
Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions
2010-06-23 23:24:11 +02:00
ppmc8260.h
Update all board to support new bbmiiphy driver (with multibus support)
2009-10-10 23:16:55 -07:00
purple.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
pxa255_idp.h
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
2009-10-04 22:37:03 -07:00
qemu-mips.h
Refresh LZMA-lib to v4.65
2009-07-22 09:43:27 +02:00
qong.h
MX31: Added support for the Casio COM57H5M10XRC to QONG
2010-05-19 09:15:50 +02:00
QS823.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
QS850.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
QS860T.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
quad100hd.h
Move arch/ppc to arch/powerpc
2010-04-21 23:42:38 +02:00
quantum.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
r2dplus.h
ide: add configuration
2010-08-08 05:17:05 +05:30
r7780mp.h
ide: add configuration
2010-08-08 05:17:05 +05:30
R360MPI.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
Rattler.h
Update all board to support new bbmiiphy driver (with multibus support)
2009-10-10 23:16:55 -07:00
RBC823.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
rd6281a.h
mvgbe: support SoCs other than kirkwood
2010-07-12 23:40:31 -07:00
redwood.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
rmu.h
rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared
2009-06-10 00:15:11 +02:00
RPXClassic.h
boards: move board_get_enetaddr() into board-specific init
2009-03-20 22:39:12 +01:00
RPXlite_DW.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
RPXlite.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
RPXsuper.h
ppc: Clean up calling of phy_reset() during init
2009-09-22 23:05:29 +02:00
RRvision.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
rsdproto.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
rsk7203.h
Convert SMC911X Ethernet driver to CONFIG_NET_MULTI API
2009-07-22 22:53:44 -07:00
s5p_goni.h
Merge branch 'master' of git://git.denx.de/u-boot-samsung
2010-08-04 00:35:10 +02:00
sacsng.h
Update all board to support new bbmiiphy driver (with multibus support)
2009-10-10 23:16:55 -07:00
Sandpoint8240.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
Sandpoint8245.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
sbc35_a9g20.h
ARM change name of defines for AT91 arm926ejs
2010-03-07 12:36:35 -06:00
sbc405.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
sbc2410x.h
Add a unified s3c24x0 header file
2009-11-27 16:26:13 -06:00
sbc8240.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
sbc8260.h
Update all board to support new bbmiiphy driver (with multibus support)
2009-10-10 23:16:55 -07:00
sbc8349.h
mpc83xx: turn on icache in core initialization to improve u-boot boot time
2010-04-22 18:44:56 -05:00
sbc8548.h
powerpc/85xx: configure autocompletion support
2010-08-01 11:18:44 -05:00
sbc8560.h
mpc85xx: Add reginfo command
2010-07-16 10:55:09 -05:00
sbc8641d.h
powerpc/86xx: Rename PCI1/2 to PCIE1/2 on MPC8641HPCN & SBC8641
2010-07-20 04:37:11 -05:00
SBC8540.h
mpc85xx: Add reginfo command
2010-07-16 10:55:09 -05:00
sc3.h
ppc4xx: Fix building of sc3 board
2010-08-09 16:05:18 +02:00
sc520_cdp.h
i386: Fix malloc initialization
2009-12-05 01:02:10 +01:00
sc520_spunk_rel.h
* Code cleanup:
2003-06-27 21:31:46 +00:00
sc520_spunk.h
i386: Fix malloc initialization
2009-12-05 01:02:10 +01:00
scb9328.h
Convert DM9000 driver for CONFIG_NET_MULTI
2009-06-15 00:13:55 -07:00
SCM.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
sequoia.h
Adds EHCI definitions to sequoia board configuration file.
2010-01-09 10:27:21 +01:00
sh7763rdp.h
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
2009-07-08 11:43:16 +09:00
sh7785lcr.h
sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV
2009-07-08 11:43:16 +09:00
shannon.h
shannon/INFERNO: fix special handling of environment configuration
2010-07-04 23:48:55 +02:00
sheevaplug.h
mvgbe: support SoCs other than kirkwood
2010-07-12 23:40:31 -07:00
SIMPC8313.h
powerpc: Update configs to properly set FSL_ELBC
2010-07-16 10:55:08 -05:00
SM850.h
TQM8xx: enable device tree support on all TQM8xx based boards.
2010-03-12 00:06:07 +01:00
smdk2400.h
Add a unified s3c24x0 header file
2009-11-27 16:26:13 -06:00
smdk2410.h
Add a unified s3c24x0 header file
2009-11-27 16:26:13 -06:00
smdk6400.h
ARM1176: Coexist with other ARM1176 platforms
2010-06-08 10:07:17 -05:00
smdkc100.h
ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7
2010-07-05 19:59:55 -04:00
smmaco4.h
mpc5xxx: Remove all references to MGT5100
2010-03-21 22:44:42 +01:00
SMN42.h
arm: cleanup remaining CONFIG_INIT_CRITICAL
2009-06-12 20:39:48 +02:00
socrates.h
powerpc/85xx: configure autocompletion support
2010-08-01 11:18:44 -05:00
sorcery.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
spc1920.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
SPD823TS.h
ppc: Clean up calling of phy_reset() during init
2009-09-22 23:05:29 +02:00
spear3xx.h
mod change 755 => 644 for multiple files
2010-03-21 22:22:53 +01:00
spear6xx.h
mod change 755 => 644 for multiple files
2010-03-21 22:22:53 +01:00
spear-common.h
SPEAr : Support added for SPEAr600 board
2010-01-23 08:15:49 -06:00
spieval.h
mpc5xxx: Remove all references to MGT5100
2010-03-21 22:44:42 +01:00
stxgp3.h
mpc85xx: Add reginfo command
2010-07-16 10:55:09 -05:00
stxssa.h
powerpc/85xx: configure autocompletion support
2010-08-01 11:18:44 -05:00
stxxtc.h
FDT: remove obsolete OF_CPU and OF_SOC macros.
2009-09-22 22:59:27 +02:00
suen3.h
arm: add support for the suen3 board from keymile
2010-03-07 12:36:36 -06:00
svm_sc8xx.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
SX1.h
arm925t: Fix CONFIG_SYS_HZ to 1000
2009-04-29 21:39:46 +02:00
SXNI855T.h
Remove legacy NAND and disk on chip references from boards.
2009-07-17 15:03:28 -05:00
t3corp.h
ppc4xx: Enable "ecctest" command on t3corp
2010-07-23 09:55:18 +02:00
taihu.h
i2c: Update references to individual i2c commands
2009-06-12 20:39:46 +02:00
taishan.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
TASREG.h
ColdFire: Cache update for all platforms
2010-03-24 11:09:37 -05:00
tb0229.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
TB5200.h
mpc5xxx: Remove all references to MGT5100
2010-03-21 22:44:42 +01:00
tcm-bf518.h
Blackfin: unify default I2C settings for ADI boards
2010-07-13 17:50:52 -04:00
tcm-bf537.h
Blackfin: unify default I2C settings for ADI boards
2010-07-13 17:50:52 -04:00
TK885D.h
net ppc: fix ethernet device names with spaces
2010-08-09 11:52:28 -07:00
tnetv107x_evm.h
TI: TNETV107X EVM initial support
2010-06-08 10:07:17 -05:00
tny_a9260.h
ARM change name of defines for AT91 arm926ejs
2010-03-07 12:36:35 -06:00
TOP860.h
Add "source" command; prepare removal of "autoscr" command
2009-04-03 22:01:42 +02:00
TOP5200.h
net: removed board-specific CONFIGs from MPC5xxx FEC driver
2009-02-09 23:01:40 -08:00
Total5200.h
mpc5xxx: Remove all references to MGT5100
2010-03-21 22:44:42 +01:00
TQM85xx.h
powerpc/85xx: configure autocompletion support
2010-08-01 11:18:44 -05:00
TQM823L.h
TQM8xx: enable device tree support on all TQM8xx based boards.
2010-03-12 00:06:07 +01:00
TQM823M.h
TQM8xx: enable device tree support on all TQM8xx based boards.
2010-03-12 00:06:07 +01:00
TQM834x.h
mpc83xx: turn on icache in core initialization to improve u-boot boot time
2010-04-22 18:44:56 -05:00
TQM850L.h
TQM8xx: enable device tree support on all TQM8xx based boards.
2010-03-12 00:06:07 +01:00
TQM850M.h
TQM8xx: enable device tree support on all TQM8xx based boards.
2010-03-12 00:06:07 +01:00
TQM855L.h
net ppc: fix ethernet device names with spaces
2010-08-09 11:52:28 -07:00
TQM855M.h
net ppc: fix ethernet device names with spaces
2010-08-09 11:52:28 -07:00
TQM860L.h
net ppc: fix ethernet device names with spaces
2010-08-09 11:52:28 -07:00
TQM860M.h
net ppc: fix ethernet device names with spaces
2010-08-09 11:52:28 -07:00
TQM862L.h
net ppc: fix ethernet device names with spaces
2010-08-09 11:52:28 -07:00
TQM862M.h
net ppc: fix ethernet device names with spaces
2010-08-09 11:52:28 -07:00
TQM866M.h
net ppc: fix ethernet device names with spaces
2010-08-09 11:52:28 -07:00
TQM885D.h
net ppc: fix ethernet device names with spaces
2010-08-09 11:52:28 -07:00
TQM5200.h
mpc5xxx: Remove all references to MGT5100
2010-03-21 22:44:42 +01:00
TQM8260.h
TQM8260: fix locations of kernel and ramdisk images in flash
2009-02-17 10:26:38 +01:00
TQM8272.h
common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
2009-12-08 22:14:07 +01:00
trab.h
Add a unified s3c24x0 header file
2009-11-27 16:26:13 -06:00
trizepsiv.h
xscale: add support for the polaris board
2009-07-06 21:52:58 +02:00
tx25.h
Add support for KARO TX25 board
2010-03-07 12:36:36 -06:00
uc100.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
uc101.h
mpc5200, mucmc52, uc101: config cleanup
2009-09-25 01:19:17 +02:00
utx8245.h
rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV
2009-02-18 00:47:43 +01:00
v5fx30teval.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
v37.h
Separate mtdparts command from jffs2
2009-03-20 22:39:14 +01:00
v38b.h
net ppc: fix ethernet device names with spaces
2010-08-09 11:52:28 -07:00
VCMA9.h
Add a unified s3c24x0 header file
2009-11-27 16:26:13 -06:00
vct.h
common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
2009-12-08 22:14:07 +01:00
ve8313.h
powerpc/83xx: Fix build issue with ve8313 board due to lbus changes
2010-08-19 13:24:00 -05:00
versatile.h
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
2009-10-04 22:37:03 -07:00
virtlab2.h
TQM8xx: enable device tree support on all TQM8xx based boards.
2010-03-12 00:06:07 +01:00
vme8349.h
mpc83xx: turn on icache in core initialization to improve u-boot boot time
2010-04-22 18:44:56 -05:00
VOH405.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
voiceblue.h
VoiceBlue: limit line lenght to 80 characters
2010-03-07 12:36:35 -06:00
VOM405.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
VoVPN-GW.h
Update all board to support new bbmiiphy driver (with multibus support)
2009-10-10 23:16:55 -07:00
vpac270.h
PXA: Declare __io for vpac270 IDE
2010-08-09 01:15:22 +02:00
W7OLMC.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
W7OLMG.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
walnut.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
wepep250.h
pxa: move serial driver to drivers/serial
2009-06-12 20:39:52 +02:00
WUH405.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
xaeniax.h
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
2009-10-04 22:37:03 -07:00
xilinx-ppc405-generic.h
ppc4xx: Generic architecture for xilinx ppc405(v3)
2008-10-24 17:26:09 +02:00
xilinx-ppc405.h
ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
2008-10-31 10:31:02 +01:00
xilinx-ppc440-generic.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
xilinx-ppc440.h
ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg
2008-10-31 10:31:02 +01:00
xilinx-ppc.h
mtd: MTD related config header changes (mtdparts command)
2009-06-12 20:45:47 +02:00
xm250.h
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
2009-10-04 22:37:03 -07:00
XPEDITE1000.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
XPEDITE5170.h
powerpc/86xx: Move PCI/PCIe address defines into common immap_86xx.h
2010-07-20 04:37:11 -05:00
XPEDITE5200.h
powerpc/85xx: configure autocompletion support
2010-08-01 11:18:44 -05:00
XPEDITE5370.h
powerpc/85xx: configure autocompletion support
2010-08-01 11:18:44 -05:00
xsengine.h
Convert SMC91111 Ethernet driver to CONFIG_NET_MULTI API
2009-10-04 22:37:03 -07:00
yosemite.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
yucca.h
ppc4xx: Add option for PPC440SPe ports without old Rev. A support
2010-04-14 10:27:39 +02:00
Yukon8220.h
rename CFG_ macros to CONFIG_SYS
2008-10-18 21:54:03 +02:00
zeus.h
i2c: Move PPC4xx I2C driver into drivers/i2c directory
2010-04-06 08:10:41 +02:00
zipitz2.h
PXA: ZipitZ2 support
2010-07-14 23:27:49 +02:00
ZPC1900.h
Update all board to support new bbmiiphy driver (with multibus support)
2009-10-10 23:16:55 -07:00
ZUMA.h
Get rid of bogus CONFIG_SYS_BUS_HZ and CONFIG_SYS_CONFIG_BUS_CLK definitions
2010-06-23 23:24:11 +02:00
zylonite.h
common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
2009-12-08 22:14:07 +01:00