Dinh Nguyen c624d07f3f arm: socfpga: reset: correct dma, qspi, and sdmmc reset bit defines ...

The DMA, QSPI, and SD/MMC reset bits are located in the permodrst register,
not the mpumodrst. So the bank for these reset bits should be 1, not 0.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>

2015-11-03 17:32:16 +01:00

..

cpu

arm: ls1021a: Add sata support on qds and twr board

2015-10-29 10:34:02 -07:00

dts

dts: zed: Enable zynq qspi controller node

2015-10-25 20:17:02 +05:30

imx-common

vf610: refactor DDRMC code

2015-10-02 10:42:31 +02:00

include

arm: ls1021a: Add sata support on qds and twr board

2015-10-29 10:34:02 -07:00

lib

arm: Switch 32-bit ARM to using generic global_data setup

2015-10-24 13:50:36 -04:00

mach-at91

at91: simplify spl board_init_f function

2015-11-01 22:02:14 +01:00

mach-bcm283x

ARM: rpi: add another revision of Raspberry Pi A+

2015-10-19 08:12:25 +02:00

mach-davinci

arm: Remove da830evm board

2015-09-28 10:48:23 -04:00

mach-exynos

mach-exynos: clock: restore calling dead exynos4_get_mmc_clk()

2015-10-03 14:39:19 +01:00

mach-highbank

ARM: highbank: move SoC sources to mach-highbank

2015-02-21 08:23:51 -05:00

mach-integrator

integrator: switch to DM serial port

2015-08-12 20:47:49 -04:00

mach-keystone

ARM: k2g: add SD card and eMMC support

2015-10-22 14:22:25 -04:00

mach-kirkwood

arm: Remove wireless_space board

2015-09-28 10:48:24 -04:00

mach-mvebu

arm: mvebu: Add DM (driver model) support

2015-10-21 02:25:01 +02:00

mach-orion5x

arch: Make board selection choices optional

2015-05-12 18:10:02 -04:00

mach-rockchip

rockchip: Reconfigure the malloc based to point to system memory

2015-10-03 10:24:33 -06:00

mach-socfpga

arm: socfpga: reset: correct dma, qspi, and sdmmc reset bit defines

2015-11-03 17:32:16 +01:00

mach-tegra

ARM: tegra114: Clear IDDQ when enabling PLLC

2015-09-16 16:11:31 -07:00

mach-uniphier

ARM: uniphier: fix init page table for ProXstream2/PH1-LD6b USB boot

2015-09-25 00:59:33 +09:00

mach-versatile

arm: Remove versatileab board

2015-09-11 15:01:25 -04:00

mach-zynq

zynq: Move SPL console init out of board_init_f()

2015-10-24 13:50:37 -04:00

mvebu-common

arm: mvebu: Move mvebu-common into mach-mvebu

2015-05-05 14:28:29 +02:00

config.mk

arm: Include the .got section in the binary

2015-05-14 18:49:34 -06:00

Kconfig

armv8/ls1043a: Enable secondary cores

2015-10-29 10:34:02 -07:00

Kconfig.debug

arm: debug: add Kconfig entries for lowlevel debug

2014-10-26 22:23:12 +01:00

Makefile

arm: Remove unused reference to nomadik

2015-09-15 15:05:22 -04:00