yair/u-boot-tk1-som
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Files
cd7255fdc2f032a67369869a7aa26d3f9ad38b21
u-boot-tk1-som/include/configs
History
Valentin Longchamp 22554ba1c9 powerpc/km8360: fix the ODT parameters for CS0 
The ODT parameters for km8360 set the ODT_WR_ACS bit in u-boot KM-2011.09
that is used in the release bootpackage for kmcoge5ne. During the
transition from the kmeter1 to km8360 this was changed to
ODT_RD_ONLY_CURRENT, which is uncorrect and causes faulty RAM accesses at
low temperatures.

This is now changed to ODT_WR_ONLY_CURRENT which is the equivalent of
ODT_WR_ACS.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
2015-11-18 15:28:56 -05:00
..
km
powerpc/km8309: define CONFIG_SYS_DDRCDR
2015-11-18 15:28:56 -05:00
manroland
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
3c120_devboard.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
10m50_devboard.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
a3m071.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
a4m072.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
ac14xx.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
acadia.h
…
adp-ag101p.h
NDS32: Generic Board Support and Unsupport
2015-08-28 11:46:35 -04:00
alt.h
defconfig: Move CONFIG_SPI_FLASH_BAR from configs
2015-07-01 21:39:06 +05:30
am43xx_evm.h
am43xx_evm: Add DFU support for qspi flash
2015-11-12 18:13:21 -05:00
am57xx_evm.h
board: ti: beagle_x15: Rename to indicate support for TI am57xx evms
2015-11-18 08:47:03 -05:00
am335x_evm.h
board/ti/am335x: add support for BeagleBone Green
2015-11-18 14:50:07 -05:00
am335x_igep0033.h
…
am335x_sl50.h
board: Add Toby-Churchill SL50 board support.
2015-09-11 17:15:27 -04:00
am3517_crane.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
am3517_evm.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
amcc-common.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
amcore.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
ap325rxa.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
ap_sh4a_4a.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
apalis_t30.h
net: Move CONFIG_E1000 options to Kconfig
2015-08-21 16:40:23 -05:00
apf27.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
apx4devkit.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
arcangel4.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
aria.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
aristainetos2.h
arm, imx6: add aristainetos 2b board version
2015-09-02 15:38:16 +02:00
aristainetos2b.h
arm, imx6: add aristainetos 2b board version
2015-09-02 15:38:16 +02:00
aristainetos-common.h
I2C: mxc_i2c: make I2C1 and I2C2 optional
2015-10-02 10:42:31 +02:00
aristainetos.h
arm, imx6: add aristainetos 2b board version
2015-09-02 15:38:16 +02:00
armadillo-800eva.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
arndale.h
arndale: Apply Cortex-A15 errata #773022 and #774769
2015-10-11 17:12:11 -04:00
aspenite.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
astro_mcf5373l.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
at91-sama5_common.h
ARM: at91: sama5: change the environment address to 0x6000
2015-11-01 22:02:16 +01:00
at91rm9200ek.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
at91sam9m10g45ek.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
at91sam9n12ek.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
at91sam9rlek.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
at91sam9x5ek.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
at91sam9260ek.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
at91sam9261ek.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
at91sam9263ek.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
atngw100.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
atngw100mkii.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
atstk1002.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
axs101.h
board: axs10x switch serial port and Ethernet to driver model
2015-11-18 00:39:22 +03:00
B4860QDS.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
baltos.h
usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB
2015-08-05 17:20:34 +02:00
bamboo.h
…
bav335x.h
usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB
2015-08-05 17:20:34 +02:00
bayleybay.h
x86: Remove CONFIG_SYS_EARLY_PCI_INIT
2015-11-13 06:46:26 -08:00
bcm28155_ap.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
bcm_ep_board.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
bct-brettl2.h
net: Fix NET_RANDOM_ETHADDR dependencies
2015-06-01 13:15:11 -05:00
beaver.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
bf506f-ezkit.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
bf518f-ezbrd.h
Move default y configs out of arch/board Kconfig
2015-06-25 22:17:55 -04:00
bf525-ucr2.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
bf526-ezbrd.h
usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB
2015-08-05 17:20:34 +02:00
bf527-ad7160-eval.h
Move default y configs out of arch/board Kconfig
2015-06-25 22:17:55 -04:00
bf527-ezkit.h
usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB
2015-08-05 17:20:34 +02:00
bf527-sdp.h
Move default y configs out of arch/board Kconfig
2015-06-25 22:17:55 -04:00
bf533-ezkit.h
net: Remove all references to CONFIG_ETHADDR and friends
2015-05-19 13:33:21 -05:00
bf533-stamp.h
Move default y configs out of arch/board Kconfig
2015-06-25 22:17:55 -04:00
bf537-minotaur.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
bf537-pnav.h
Move default y configs out of arch/board Kconfig
2015-06-25 22:17:55 -04:00
bf537-srv1.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
bf537-stamp.h
Move default y configs out of arch/board Kconfig
2015-06-25 22:17:55 -04:00
bf538f-ezkit.h
Move default y configs out of arch/board Kconfig
2015-06-25 22:17:55 -04:00
bf548-ezkit.h
usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB
2015-08-05 17:20:34 +02:00
bf561-acvilon.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
bf561-ezkit.h
net: Remove all references to CONFIG_ETHADDR and friends
2015-05-19 13:33:21 -05:00
bf609-ezkit.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
bfin_adi_common.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
bg0900.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
blackstamp.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
blackvme.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
br4.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
BSC9131RDB.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
BSC9132QDS.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
bubinga.h
…
bur_am335x_common.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
C29XPCIE.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
calimain.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
canmb.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
canyonlands.h
powerpc: ppc4xx: convert AMCC boards to generic board
2015-03-28 12:09:46 -04:00
cardhu.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
cgtqmx6eval.h
I2C: mxc_i2c: make I2C1 and I2C2 optional
2015-10-02 10:42:31 +02:00
charon.h
…
chromebook_jerry.h
rockchip: Add basic support for jerry
2015-09-02 21:28:24 -06:00
chromebook_link.h
x86: Move CONFIG_ENV_IS_IN_SPI_FLASH to x86-common.h
2015-04-29 18:51:48 -06:00
chromebox_panther.h
x86: panther: Add PCI and video configuration
2015-09-09 07:48:03 -06:00
cm5200.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
cm_fx6.h
arm: mx6: cm-fx6: define fallback boot devices for spl
2015-11-18 14:50:05 -05:00
cm_t35.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
cm_t43.h
arm: am437x: Introduce new board cm-t43
2015-08-12 20:48:05 -04:00
cm_t54.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
cm_t335.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
cm_t3517.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
cm-bf527.h
net: Fix NET_RANDOM_ETHADDR dependencies
2015-06-01 13:15:11 -05:00
cm-bf533.h
net: Remove all references to CONFIG_ETHADDR and friends
2015-05-19 13:33:21 -05:00
cm-bf537e.h
net: Fix NET_RANDOM_ETHADDR dependencies
2015-06-01 13:15:11 -05:00
cm-bf537u.h
net: Fix NET_RANDOM_ETHADDR dependencies
2015-06-01 13:15:11 -05:00
cm-bf548.h
net: Remove all references to CONFIG_ETHADDR and friends
2015-05-19 13:33:21 -05:00
cm-bf561.h
net: Remove all references to CONFIG_ETHADDR and friends
2015-05-19 13:33:21 -05:00
cobra5272.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
colibri_pxa270.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
colibri_t20.h
apalis/colibri_t20/30: clean-up
2015-08-13 13:06:03 -07:00
colibri_t30.h
apalis/colibri_t20/30: clean-up
2015-08-13 13:06:03 -07:00
colibri_vf.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
controlcenterd.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
corenet_ds.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
corvus.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
CPCI2DP.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
CPCI4052.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
crownbay.h
x86: Remove CONFIG_SYS_EARLY_PCI_INIT
2015-11-13 06:46:26 -08:00
cyrus.h
mpc85xx: Add support for the Varisys Cyrus board
2015-11-04 15:19:34 -08:00
da850evm.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
dalmore.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
db-88f6820-gp.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
db-mv784mp-gp.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
dbau1x00.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
devkit3250.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
devkit8000.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
digsy_mtc.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
dlvision-10g.h
dlvision-10g: Support displayport
2015-11-12 15:59:04 -05:00
dlvision.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
dnp5370.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
dns325.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
dockstar.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
dra7xx_evm.h
ARM: dra7xx_evm: Add DFU support for qspi flash
2015-11-03 17:29:33 +01:00
draco.h
arm, am33xx: update for siemens am335x based boards
2015-06-19 16:46:47 -04:00
dreamplug.h
arm: kirkwood: Move common definitions into common file
2015-11-17 23:41:41 +01:00
duovero.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
e2220-1170.h
e2220-1170: Remove hard-coded counter frequency
2015-09-16 16:10:23 -07:00
ea20.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
eb_cpu5282.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
eco5pk.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
ecovec.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
edb93xx.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
edminiv2.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
efi-x86.h
tpm: Convert board config TPM options to Kconfig
2015-08-31 07:57:27 -06:00
embestmx6boards.h
I2C: mxc_i2c: make I2C1 and I2C2 optional
2015-10-02 10:42:31 +02:00
espt.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
ethernut5.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
exynos4-common.h
usb: USB download gadget and functions config options coherent naming
2015-07-22 08:57:53 +02:00
exynos5-common.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
exynos5-dt-common.h
exynos: Drop old exynos5250-specific board code
2015-08-05 21:06:16 -06:00
exynos5250-common.h
exynos: config: Move common options to the common headers and tidy up
2015-08-05 21:06:16 -06:00
exynos5420-common.h
exynos: Drop old exynos5420-specific board code
2015-08-05 21:06:16 -06:00
exynos-common.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
firefly-rk3288.h
rockchip: Add basic support for firefly-rk3288
2015-09-02 21:28:24 -06:00
flea3.h
imx35, flea3: add FIT image support
2015-10-30 15:11:52 +01:00
fx12mm.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
galileo.h
x86: Remove CONFIG_SYS_EARLY_PCI_INIT
2015-11-13 06:46:26 -08:00
gdppc440etx.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
goflexhome.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
gose.h
defconfig: Move CONFIG_SPI_FLASH_BAR from configs
2015-07-01 21:39:06 +05:30
gplugd.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
gr_cpci_ax2000.h
sparc: leon3: Added memory controller initialization using new AMBA PnP routines.
2015-11-13 10:23:33 +02:00
gr_ep2s60.h
sparc: leon3: Added memory controller initialization using new AMBA PnP routines.
2015-11-13 10:23:33 +02:00
gr_xc3s_1500.h
sparc: leon3: Added memory controller initialization using new AMBA PnP routines.
2015-11-13 10:23:33 +02:00
grasshopper.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
grsim_leon2.h
sparc: Update LEON serial drivers to use readl/writel macros
2015-11-13 10:23:32 +02:00
grsim.h
sparc: leon3: Added memory controller initialization using new AMBA PnP routines.
2015-11-13 10:23:33 +02:00
guruplug.h
arm: kirkwood: Move common definitions into common file
2015-11-17 23:41:41 +01:00
gw_ventana.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
h2200.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
harmony.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
highbank.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
hikey.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
hrcon.h
hrcon: Add fan controllers
2015-11-12 18:04:10 -05:00
ib62x0.h
arm: kirkwood: ib62x0: drop duplicate defines from CONFIG_SYS_MVFS
2015-11-17 23:41:41 +01:00
ibf-dsp561.h
net: Remove all references to CONFIG_ETHADDR and friends
2015-05-19 13:33:21 -05:00
icon.h
…
iconnect.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
ids8313.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
imx6_spl.h
imx: mx6slevk: add SPL support
2015-09-02 15:34:13 +02:00
imx27lite-common.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
imx31_phycore.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
inka4x0.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
integrator-common.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
integratorap.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
integratorcp.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
intip.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
io64.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
io.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
iocon.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
ip04.h
Move default y configs out of arch/board Kconfig
2015-06-25 22:17:55 -04:00
ipam390.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
ipek01.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
jetson-tk1.h
ARM: tegra: simplify GPU setup
2015-11-12 09:21:07 -07:00
jupiter.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
k2e_evm.h
configs: k2*_evm: rename skernel binary names to generated file names
2015-07-27 15:03:12 -04:00
k2g_evm.h
ARM: k2g: Add config file
2015-10-22 14:22:27 -04:00
k2hk_evm.h
configs: k2*_evm: rename skernel binary names to generated file names
2015-07-27 15:03:12 -04:00
k2l_evm.h
configs: k2*_evm: rename skernel binary names to generated file names
2015-07-27 15:03:12 -04:00
katmai.h
…
kilauea.h
…
km82xx.h
km/powerpc: move open firmware defines to km-powerpc.h
2015-11-18 15:28:54 -05:00
km8360.h
powerpc/km8360: fix the ODT parameters for CS0
2015-11-18 15:28:56 -05:00
km_kirkwood.h
arm/km_kirkwood: remove KM_ENV_BUS and use CONFIG_I2C_ENV_EEPROM_BUS
2015-11-18 14:50:07 -05:00
kmp204x.h
…
koelsch.h
defconfig: Move CONFIG_SPI_FLASH_BAR from configs
2015-07-01 21:39:06 +05:30
kwb.h
board/BuR/kwb: use bootvx(...) (with bootline feature) instead go(...)
2015-11-12 13:17:27 -05:00
kzm9g.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
lacie_kw.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
lager.h
defconfig: Move CONFIG_SPI_FLASH_BAR from configs
2015-07-01 21:39:06 +05:30
ls1021aqds.h
ls102xa: Adjust some macros for SD boot on LS1021A QDS board
2015-10-30 09:19:48 -07:00
ls1021atwr.h
configs: ls1021atwr: Enable ID EEPROM for SD boot
2015-10-30 09:19:48 -07:00
ls1043a_common.h
armv8/ls1043a: Enable secondary cores
2015-10-29 10:34:02 -07:00
ls1043ardb.h
armv8/ls1043ardb: Add sd boot support
2015-10-29 10:34:02 -07:00
ls2085a_common.h
armv8/fsl_lsch3: Change arch to fsl-layerscape
2015-10-29 10:34:00 -07:00
ls2085a_emu.h
drivers/fsl-mc: Changed MC firmware loading for new boot architecture
2015-04-23 08:55:57 -07:00
ls2085a_simu.h
armv8/ls2085a_simu: enable eSDHC
2015-09-01 21:37:56 -05:00
ls2085aqds.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
ls2085ardb.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
lsxl.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
luan.h
…
lwmon5.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
m28evk.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
m53evk.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
M5208EVBE.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
M5235EVB.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
M5249EVB.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
M5253DEMO.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
M5253EVBE.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
M5272C3.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
M5275EVB.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
M5282EVB.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
M5329EVB.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
M5373EVB.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
M5475EVB.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
M5485EVB.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
M52277EVB.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
M53017EVB.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
M54418TWR.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
M54451EVB.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
M54455EVB.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
makalu.h
…
malta.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
maxbcm.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
mcx.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
mecp5123.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
medcom-wide.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
meesc.h
arm: at91: reworked meesc board support
2015-11-03 14:21:32 +01:00
microblaze-generic.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
MigoR.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
minnowmax.h
x86: Remove CONFIG_SYS_EARLY_PCI_INIT
2015-11-13 06:46:26 -08:00
MIP405.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
ml507.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
motionpro.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
mpc5121-common.h
…
mpc5121ads.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
mpc8308_p1m.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
MPC832XEMDS.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
MPC837XEMDS.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
MPC837XERDB.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
MPC8308RDB.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
MPC8313ERDB.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
MPC8315ERDB.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
MPC8323ERDB.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
MPC8349EMDS.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
MPC8349ITX.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
MPC8536DS.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
MPC8540ADS.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
MPC8541CDS.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
MPC8544DS.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
MPC8548CDS.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
MPC8555CDS.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
MPC8560ADS.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
MPC8568MDS.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
MPC8569MDS.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
MPC8572DS.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
MPC8610HPCD.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
MPC8641HPCN.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
mpr2.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
ms7720se.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
ms7722se.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
ms7750se.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
mt_ventoux.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
munices.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
mv-common.h
arm: mvebu: Enable DM_SERIAL on AXP / A38x boards
2015-10-21 02:25:01 +02:00
mv-plug-common.h
arm: kirkwood: Move common definitions into common file
2015-11-17 23:41:41 +01:00
mx6_common.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
mx6cuboxi.h
imx6: fix warnings due to switch to distro environment
2015-11-13 10:49:01 +01:00
mx6qarm2.h
net: Move the CMD_NET config to defconfigs
2015-06-01 09:40:15 -05:00
mx6qsabreauto.h
I2C: mxc_i2c: make I2C1 and I2C2 optional
2015-10-02 10:42:31 +02:00
mx6sabre_common.h
imx: mx6sabresd: add i.MX6DQP Sabresd support
2015-10-30 15:15:36 +01:00
mx6sabresd.h
imx: mx6sabresd discard PHYS_SDRAM_SIZE
2015-10-30 15:13:06 +01:00
mx6slevk.h
I2C: mxc_i2c: make I2C1 and I2C2 optional
2015-10-02 10:42:31 +02:00
mx6sxsabresd.h
I2C: mxc_i2c: make I2C1 and I2C2 optional
2015-10-02 10:42:31 +02:00
mx6ul_14x14_evk.h
imx: mx6ul_14x14_evk: support lcdif display
2015-11-12 17:40:53 +01:00
mx7_common.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
mx7dsabresd.h
imx: mx7dsabresd: support lcdif
2015-11-12 17:41:20 +01:00
mx23_olinuxino.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
mx23evk.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
mx25pdk.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
mx28evk.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
mx31ads.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
mx31pdk.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
mx35pdk.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
mx51evk.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
mx53ard.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
mx53evk.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
mx53loco.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
mx53smd.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
mxs.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
nas220.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
neo.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
nitrogen6x.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
nokia_rx51.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
novena.h
arm: novena: Fix kernel_addr_r env variable
2015-11-12 17:34:15 +01:00
nyan-big.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
o2d300.h
…
o2d.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
o2dnt2.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
o2dnt-common.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
o2i.h
…
o2mnt.h
…
o3dnt.h
…
odroid_xu3.h
exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4.
2015-11-02 10:38:00 +09:00
odroid.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
omap3_beagle.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
omap3_cairo.h
configs: remove remnants of CONFIG_SYS_NAND_QUIET_TEST
2015-09-28 10:15:46 -04:00
omap3_evm_common.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
omap3_evm_quick_mmc.h
net: Move the CMD_NET config to defconfigs
2015-06-01 09:40:15 -05:00
omap3_evm_quick_nand.h
net: Move the CMD_NET config to defconfigs
2015-06-01 09:40:15 -05:00
omap3_evm.h
usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB
2015-08-05 17:20:34 +02:00
omap3_igep00x0.h
igep00x0: Use BCH8 ECC
2015-10-19 17:06:16 -04:00
omap3_logic.h
configs: Use config_distro_defaults.h in ti_armv7_common.h
2015-11-12 18:12:56 -05:00
omap3_overo.h
configs: remove remnants of CONFIG_SYS_NAND_QUIET_TEST
2015-09-28 10:15:46 -04:00
omap3_pandora.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
omap3_zoom1.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
omap4_panda.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
omap4_sdp4430.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
omap5_uevm.h
include: configs: Enable DWC3 and DFU in OMAP5 uEVM
2015-09-11 17:15:20 -04:00
omapl138_lcdk.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
openrd.h
Revive OpenRD targets
2015-11-10 15:04:21 +01:00
openrisc-generic.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
origen.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
ot1200.h
I2C: mxc_i2c: make I2C1 and I2C2 optional
2015-10-02 10:42:31 +02:00
p1_p2_rdb_pc.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
p1_twr.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
p2371-0000.h
p2371: Remove hard-coded counter frequency
2015-09-16 16:10:23 -07:00
p2371-2180.h
ARM: tegra: enable PCI support of p2371-2180
2015-11-12 09:21:06 -07:00
p2571.h
ARM: tegra: simplify GPU setup
2015-11-12 09:21:07 -07:00
P1010RDB.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
P1022DS.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
P1023RDB.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
P2041RDB.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
P3041DS.h
…
P4080DS.h
…
P5020DS.h
…
P5040DS.h
…
PATI.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
paz00.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
pb1x00.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
pcm030.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
pcm051.h
usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB
2015-08-05 17:20:34 +02:00
pcm052.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
pdm360ng.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
peach-pi.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
peach-pit.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
pengwyn.h
pengwyn: nand and ethernet fixes
2015-11-12 18:13:19 -05:00
pepper.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
picosam9g45.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
PIP405.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
platinum_picon.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
platinum_titanium.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
platinum.h
I2C: mxc_i2c: make I2C1 and I2C2 optional
2015-10-02 10:42:31 +02:00
PLU405.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
plutux.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
pm9g45.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
pm9261.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
pm9263.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
PMC405DE.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
PMC440.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
pogo_e02.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
porter.h
defconfig: Move CONFIG_SPI_FLASH_BAR from configs
2015-07-01 21:39:06 +05:30
pr1.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
pxa-common.h
…
pxm2.h
arm, am33xx: update for siemens am335x based boards
2015-06-19 16:46:47 -04:00
qemu-mips64.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
qemu-mips.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
qemu-ppce500.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
qemu-x86.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
r0p7734.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
r2dplus.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
r7780mp.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
rastaban.h
siemens,am33x,rastaban: add rastaban config
2015-06-19 16:46:50 -04:00
rcar-gen2-common.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
redwood.h
…
rk3288_common.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
rpi_2.h
arm/rpi: Enable dcache
2015-08-12 20:47:43 -04:00
rpi-common.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
rpi.h
ARM: bcm283x: Define CONFIG_SYS_CACHELINE_SIZE
2015-08-12 20:47:41 -04:00
rsk7203.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
rsk7264.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
rsk7269.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
rut.h
arm, am33xx: update for siemens am335x based boards
2015-06-19 16:46:47 -04:00
s5p_goni.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
s5pc210_universal.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
sama5d3_xplained.h
ARM: at91: sama5: move the nandflash env config to at91-sama5_common.h
2015-08-21 15:47:05 +02:00
sama5d3xek.h
ARM: at91: sama5: update the spi flash mapping
2015-08-21 15:47:05 +02:00
sama5d4_xplained.h
ARM: at91: sama5: update the spi flash mapping
2015-08-21 15:47:05 +02:00
sama5d4ek.h
ARM: at91: sama5: update the spi flash mapping
2015-08-21 15:47:05 +02:00
sandbox.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
sansa_fuze_plus.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
sbc8349.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
sbc8548.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
sbc8641d.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
sc_sps_1.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
seaboard.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
secomx6quq7.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
sequoia.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
sh7752evb.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
sh7753evb.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
sh7757lcr.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
sh7763rdp.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
sh7785lcr.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
sheevaplug.h
arm: kirkwood: Move common definitions into common file
2015-11-17 23:41:41 +01:00
shmin.h
Move defaults from config_cmd_default.h to Kconfig
2015-06-25 22:18:34 -04:00
siemens-am33x-common.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
silk.h
defconfig: Move CONFIG_SPI_FLASH_BAR from configs
2015-07-01 21:39:06 +05:30
smartweb.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
smdk2410.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
smdk5250.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
smdk5420.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
smdkc100.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
smdkv310.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
snapper9260.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
sniper.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
snow.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
socfpga_arria5_socdk.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
socfpga_common.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
socfpga_cyclone5_socdk.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
socfpga_de0_nano_soc.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
socfpga_mcvevk.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
socfpga_sockit.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
socrates.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
som-6896.h
x86: Remove CONFIG_SYS_EARLY_PCI_INIT
2015-11-13 06:46:26 -08:00
spear3xx_evb.h
…
spear6xx_evb.h
…
spear-common.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
spring.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
stm32f429-discovery.h
stm32f429-discovery: add CONFIG_SYS_THUMB_BUILD
2015-11-10 15:03:34 +01:00
stout.h
arm: rmobile: Add Stout board support
2015-08-31 17:32:59 +09:00
strider.h
mpc83xx: Add strider board
2015-11-12 18:03:48 -05:00
stv0991.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
sun4i.h
Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory"
2015-06-28 11:46:31 -04:00
sun5i.h
Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory"
2015-06-28 11:46:31 -04:00
sun6i.h
Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory"
2015-06-28 11:46:31 -04:00
sun7i.h
Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory"
2015-06-28 11:46:31 -04:00
sun8i.h
Revert "sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memory"
2015-06-28 11:46:31 -04:00
sun9i.h
sun9i: Basic sun9i (A80) support
2015-05-29 13:46:36 +02:00
sunxi-common.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
suvd3.h
…
t3corp.h
…
t4qds.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
T102xQDS.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
T102xRDB.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
T104xRDB.h
T104xD4RDB: Fix PHY address for PHY connected to FM1@DTSEC3
2015-11-02 08:51:10 -08:00
T208xQDS.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
T208xRDB.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
T1040QDS.h
powerpc/t1040qds: enable peripheral clock for eSDHC
2015-11-02 08:50:15 -08:00
T4240QDS.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
T4240RDB.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
tam3517-common.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
tao3530.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
taurus.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
tb100.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
tbs2910.h
I2C: mxc_i2c: make I2C1 and I2C2 optional
2015-10-02 10:42:31 +02:00
tcm-bf518.h
net: Fix NET_RANDOM_ETHADDR dependencies
2015-06-01 13:15:11 -05:00
tcm-bf537.h
net: Fix NET_RANDOM_ETHADDR dependencies
2015-06-01 13:15:11 -05:00
tec-ng.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
tec.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
tegra20-common.h
ARM: tegra: expand all SPL sizes to be consistent
2015-10-02 11:05:30 -07:00
tegra30-common.h
ARM: tegra: expand all SPL sizes to be consistent
2015-10-02 11:05:30 -07:00
tegra114-common.h
ARM: tegra: expand all SPL sizes to be consistent
2015-10-02 11:05:30 -07:00
tegra124-common.h
ARM: tegra: move VPR configuration to a later stage
2015-08-06 10:50:03 -07:00
tegra210-common.h
ARM: tegra: expand all SPL sizes to be consistent
2015-10-02 11:05:30 -07:00
tegra-common-post.h
ARM: tegra: enable CONFIG_SYS_NONCACHED_MEMORY everywhere
2015-11-10 18:04:30 +01:00
tegra-common-usb-gadget.h
ARM: tegra: enable DFU for RAM
2015-09-11 17:15:26 -04:00
tegra-common.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
thuban.h
siemens,am33x,thuban: rename dxr2 to thuban
2015-06-19 16:46:50 -04:00
ti814x_evm.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
ti816x_evm.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
ti_am335x_common.h
configs: split ti_armv7_common into a omap generic header
2015-07-27 15:02:17 -04:00
ti_armv7_common.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
ti_armv7_keystone2.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
ti_armv7_omap.h
configs: split ti_armv7_common into a omap generic header
2015-07-27 15:02:17 -04:00
ti_omap3_common.h
ti: omap3: config: remove 1 from boolean define
2015-10-11 17:12:06 -04:00
ti_omap4_common.h
ti_omap4_common.h: Switch to CONFIG_OMAP_SERIAL for non-SPL DM_SERIAL
2015-10-22 14:18:40 -04:00
ti_omap5_common.h
ti_omap5_common: mmc: do not define DM_MMC for spl
2015-10-22 14:44:01 -04:00
titanium.h
I2C: mxc_i2c: make I2C1 and I2C2 optional
2015-10-02 10:42:31 +02:00
TQM823L.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
TQM823M.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
TQM834x.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
TQM850L.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
TQM850M.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
TQM855L.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
TQM855M.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
TQM860L.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
TQM860M.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
TQM862L.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
TQM862M.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
TQM866M.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
TQM885D.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
TQM5200.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
tqma6_mba6.h
arm: mx6: tqma6: fix spelling error in condition
2015-06-01 09:54:52 +02:00
tqma6_wru4.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
tqma6.h
I2C: mxc_i2c: make I2C1 and I2C2 optional
2015-10-02 10:42:31 +02:00
trats2.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
trats.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
tricorder.h
tricorder: switch to CONFIG_SYS_THUMB_BUILD
2015-11-10 15:03:59 +01:00
trimslice.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
ts4800.h
ts4800: add CONFIG_OF_LIBFDT
2015-10-30 15:09:20 +01:00
tseries.h
usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB
2015-08-05 17:20:34 +02:00
tuxx1.h
powerpc/83xx: add support for kmtepr2 board
2015-11-18 15:28:51 -05:00
twister.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
UCP1020.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
udoo.h
udoo: Remove SPL fat support
2015-09-02 15:25:28 +02:00
uniphier.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
usb_a9263.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
usbarmory.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
v5fx30teval.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
v38b.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
VCMA9.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
vct.h
cmd: Convert CONFIG_CMD_ELF to Kconfig
2015-10-21 07:46:25 -06:00
ve8313.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
venice2.h
ARM: tegra: simplify GPU setup
2015-11-12 09:21:07 -07:00
ventana.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
vexpress_aemv8a.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
vexpress_ca5x2.h
Move setting CONFIG_BOOTP_VCI_STRING to before including the vexpress-common header
2015-08-12 12:08:20 -04:00
vexpress_ca9x4.h
Move setting CONFIG_BOOTP_VCI_STRING to before including the vexpress-common header
2015-08-12 12:08:20 -04:00
vexpress_ca15_tc2.h
Move setting CONFIG_BOOTP_VCI_STRING to before including the vexpress-common header
2015-08-12 12:08:20 -04:00
vexpress_common.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
vf610twr.h
common/board_f.c: change the macro name and remove it for PPC platforms
2015-10-29 10:33:58 -07:00
vme8349.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
VOM405.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
walnut.h
…
wandboard.h
imx6: fix warnings due to switch to distro environment
2015-11-13 10:49:01 +01:00
warp.h
I2C: mxc_i2c: make I2C1 and I2C2 optional
2015-10-02 10:42:31 +02:00
whistler.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
woodburn_common.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
woodburn_sd.h
…
woodburn.h
…
work_92105.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
x86-chromebook.h
x86: Remove CONFIG_SYS_EARLY_PCI_INIT
2015-11-13 06:46:26 -08:00
x86-common.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
x600.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
xfi3.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00
xilinx_zynqmp_ep.h
arm: zynq: Move serial driver to driver model
2015-11-04 14:49:53 +01:00
xilinx_zynqmp.h
arm: zynq: Move serial driver to driver model
2015-11-04 14:49:53 +01:00
xilinx-ppc405-generic.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
xilinx-ppc405.h
…
xilinx-ppc440-generic.h
kconfig: add config option for shell prompt
2015-08-13 07:19:33 -04:00
xilinx-ppc440.h
…
xilinx-ppc.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
xpedite517x.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
xpedite520x.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
xpedite537x.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
xpedite550x.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
xpedite1000.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
yosemite.h
…
yucca.h
…
zmx25.h
arm, powerpc: select SYS_GENERIC_BOARD
2015-10-24 13:50:38 -04:00
zynq_microzed.h
arm: zynq: Move serial driver to driver model
2015-11-04 14:49:53 +01:00
zynq_picozed.h
arm: zynq: Move serial driver to driver model
2015-11-04 14:49:53 +01:00
zynq_zc70x.h
arm: zynq: Move serial driver to driver model
2015-11-04 14:49:53 +01:00
zynq_zc770.h
arm: zynq: Move serial driver to driver model
2015-11-04 14:49:53 +01:00
zynq_zed.h
arm: zynq: Move serial driver to driver model
2015-11-04 14:49:53 +01:00
zynq_zybo.h
arm: zynq: Move serial driver to driver model
2015-11-04 14:49:53 +01:00
zynq-common.h
common: add CMD_GPIO to Kconfig
2015-11-18 14:50:06 -05:00