Felipe Balbi 26707d9e6b usb: host: xhci: make sure to power up PHY ...

some boards won't work if the PHY isn't explicitly
powered up.

Signed-off-by: Felipe Balbi <balbi@ti.com>

2014-07-09 22:11:51 +02:00

..

ehci-armada100.c

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

ehci-atmel.c

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

ehci-exynos.c

exynos: usb: Fix data abort on boards w/o vbus-gpio node in the DT

2014-04-30 10:30:57 +02:00

ehci-faraday.c

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

ehci-fsl.c

drivers/usb : Define usb control register mask for w1c bits

2014-05-16 16:24:27 -05:00

ehci-hcd.c

usb: Add endian support macros to interrupt transfers in the EHCI driver.

2014-04-30 10:30:56 +02:00

ehci-marvell.c

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

ehci-mpc512x.c

powerpc/usb:Differentiate USB controller base address

2013-10-24 09:35:09 -07:00

ehci-mx5.c

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

ehci-mx6.c

usb: ehci-mx6: add support for otg port

2013-10-20 23:46:33 +02:00

ehci-mxc.c

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

ehci-mxs.c

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

ehci-omap.c

usb: ehci-omap: Reset the USB Host OMAP module

2013-12-06 07:02:32 -05:00

ehci-pci.c

usb: ehci-pci: Clarify and cleanup the EHCI controller detection

2013-12-18 19:53:19 +01:00

ehci-ppc4xx.c

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

ehci-rmobile.c

usb: ehci: rmobile: Add support ehci host driver of rmobile SoCs

2014-04-30 10:30:56 +02:00

ehci-spear.c

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

ehci-tegra.c

usb: tegra: support device mode

2014-05-15 00:21:17 +02:00

ehci-vct.c

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

ehci-zynq.c

ARM: zynq: ehci: Added USB host driver support

2014-05-14 07:43:35 +02:00

ehci.h

usb: ehci-hcd: add enum usb_init_type parameter to ehci_hcd_init.

2013-10-20 23:46:27 +02:00

isp116x-hcd.c

usb: create common header virtual root hub descriptors

2014-03-10 18:53:36 +01:00

isp116x.h

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

Makefile

arm: ep9315: Return back Cirrus Logic EDB9315A board support

2014-07-04 23:45:48 +02:00

ohci-at91.c

arm: atmel: get rid of too many ifdeffery

2013-11-04 20:32:37 +01:00

ohci-da8xx.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

ohci-ep93xx.c

arm: ep9315: Return back Cirrus Logic EDB9315A board support

2014-07-04 23:45:48 +02:00

ohci-hcd.c

usb: create common header virtual root hub descriptors

2014-03-10 18:53:36 +01:00

ohci-s3c24xx.c

usb: create common header virtual root hub descriptors

2014-03-10 18:53:36 +01:00

ohci-s3c24xx.h

dm: Move s3c24xx USB driver to a proper place

2012-10-18 06:54:18 +02:00

ohci.h

usb: new board-specific USB init interface

2013-10-20 23:42:40 +02:00

r8a66597-hcd.c

usb: r8a66597: Fix initilization size of r8a66597 info structure

2014-06-25 22:38:04 +02:00

r8a66597.h

usb: r8a66597: Fix argument mistake of inl

2011-08-08 21:40:40 +02:00

sl811-hcd.c

usb: add enum usb_init_type parameter to usb_lowlevel_init

2013-10-20 23:45:26 +02:00

sl811.h

drivers/usb: regorganisation

2009-04-06 20:40:46 +02:00

utmi-armada100.c

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24 09:44:38 -04:00

xhci-exynos5.c

exynos: usb: Fix data abort on boards w/o vbus-gpio node in the DT

2014-04-30 10:30:57 +02:00

xhci-mem.c

USB: xHCI: Add stack support for xHCI

2013-10-20 23:42:38 +02:00

xhci-omap.c

usb: host: xhci: make sure to power up PHY

2014-07-09 22:11:51 +02:00

xhci-ring.c

USB: xHCI: Add stack support for xHCI

2013-10-20 23:42:38 +02:00

xhci.c

usb: xhci: (likely) fix bracket in if condition

2014-06-25 22:43:16 +02:00

xhci.h

USB: xHCI: Add stack support for xHCI

2013-10-20 23:42:38 +02:00