Files
u-boot-tk1-som/include
Peng Fan f0ff57b0b2 imx: mx6ul_14x14_evk add basic board support
1. Add USDHC, I2C, UART, 74LV, USB, QSPI support.
2. Support SPL
3. CONFIG_MX6UL_14X14_EVK_EMMC_REWORK is introduced, this board default
   supports sd for usdhc2, but can do hardware rework to make usdhc2 support
   emmc.

Boot Log:
U-Boot SPL 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59)
reading u-boot.img
reading u-boot.img

U-Boot 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59 +0800)

CPU:   Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz)
CPU:   Commercial temperature grade (0C to 95C)CPU:   Thermal invalid data, fuse: 0x0
 - invalid sensor device
 Reset cause: POR
 Board: MX6UL 14x14 EVK
 I2C:   ready
 DRAM:  512 MiB
 MMC:   FSL_SDHC: 0, FSL_SDHC: 1
 *** Warning - bad CRC, using default environment

 In:    serial
 Out:   serial
 Err:   serial
 Net:   CPU Net Initialization Failed
 No ethernet found.
 Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-08-02 11:05:09 +02:00
..
2014-07-30 08:48:03 -04:00
2015-05-05 20:58:20 -06:00
2015-06-10 19:26:54 -06:00
2014-02-04 16:32:20 +01:00
2014-06-21 10:06:58 -06:00
2015-04-10 14:23:23 +02:00
2014-10-25 15:27:36 -04:00
2015-06-10 19:26:55 -06:00
2015-05-28 08:18:24 -04:00
2014-12-05 08:06:15 -08:00
2015-01-21 10:25:02 +01:00
2015-04-23 16:46:50 -07:00
2015-03-05 08:56:39 -05:00
2014-11-19 08:48:42 +01:00
2014-12-11 13:18:43 -07:00
2013-09-24 09:10:33 -04:00
2014-10-25 15:27:37 -04:00
2014-05-28 10:58:19 +09:00
2014-06-20 11:54:29 -06:00
2014-10-22 16:56:41 -06:00
2015-04-23 09:05:53 -06:00
2013-09-20 10:30:54 -04:00
2015-05-05 12:29:36 +03:00
2014-05-30 14:03:24 -04:00
2013-11-09 17:21:01 +01:00
2015-01-06 10:10:04 +02:00
2015-06-04 03:34:47 -06:00
2015-06-04 02:39:39 -06:00
2015-01-05 12:08:55 -05:00
2015-04-20 17:57:13 -05:00
2014-11-24 12:00:00 +01:00
2015-07-01 21:15:03 +05:30
2015-07-01 21:15:03 +05:30
2015-03-05 20:50:29 -05:00
2015-07-26 12:11:33 +02:00
2013-12-04 08:11:28 -05:00
2015-01-21 10:25:53 +01:00