Files
u-boot-tk1-som/include
Peng Fan fad7d735a0 imx:mx6sxsabresd add qspi support
Configure the pad setting and enable qspi clock to support qspi
flashes access.

Add QSPI related macro in configuration header file.

Note:
mx6sxsabresd Revb board, 32M flash is used, but in header file,
CONFIG_SPI_FLASH_BAR is not defined, and we still use SZ_16M.
The LUT initialization qspi_set_lut function uses 32BIT addr,
however CONFIG_SPI_FLASH_BAR  and 24BIT addr should be used to
access bigger than 16MB size flash, and BRRD/BRWR should also
be supported. Future patches will fix this.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
2014-12-31 14:52:32 +05:30
..
2014-12-31 14:52:32 +05:30
2014-12-11 13:18:43 -07:00
2014-07-30 08:48:03 -04:00
2014-07-18 19:42:16 +01:00
2014-07-18 19:42:10 +01:00
2014-11-13 14:49:01 +01:00
2014-02-04 16:32:20 +01:00
2014-02-21 08:42:47 -05:00
2014-11-21 08:13:17 +01:00
2014-05-27 10:21:32 -04:00
2014-06-21 10:06:58 -06:00
2014-10-06 17:34:40 +02:00
2014-10-25 15:27:36 -04:00
2014-12-01 15:24:26 -05:00
2014-11-19 08:48:41 +01:00
2014-12-05 08:06:15 -08:00
2014-11-19 08:48:42 +01:00
2014-06-19 11:18:55 -04:00
2014-12-11 13:18:43 -07:00
2014-12-11 13:18:42 -07:00
2013-09-24 09:10:33 -04:00
2014-10-25 15:27:37 -04:00
2014-05-28 10:58:19 +09:00
2014-06-20 11:54:29 -06:00
2014-10-22 16:56:41 -06:00
2013-09-20 10:30:54 -04:00
2014-05-30 14:03:24 -04:00
2013-11-09 17:21:01 +01:00
2014-08-01 18:44:56 +03:00
2014-10-27 14:35:55 +01:00
2014-11-24 12:00:00 +01:00
2014-10-22 10:36:50 -06:00
2014-12-13 15:08:04 -07:00
2014-10-27 14:35:55 +01:00
2013-12-04 08:11:28 -05:00
2014-11-25 06:34:15 -07:00