Replacement ('Arduino') controller that fits inside a Stepcraft CNC machine. Comptatible with GRBL and EstlCAM

Go to file

Eflukx 8653edeed8 Update Schematics.pdf to include changes in `855a5c1`		2017-09-20 20:53:05 +02:00
images	Add readme and a nice image	2017-09-09 21:12:17 +02:00
.gitignore	Add schematics and (unrouted) board	2017-09-09 10:42:58 +02:00
readme.md	Add readme.md	2017-09-09 21:26:19 +02:00
Schematics.pdf	Update Schematics.pdf to include changes in `855a5c1`	2017-09-20 20:53:05 +02:00
stepcraft_controller-cache.lib	Change SiLabs CP2102 QFN-28 to (more common) CP2102N QFN-24	2017-09-20 20:48:11 +02:00
stepcraft_controller.kicad_pcb	Change SiLabs CP2102 QFN-28 to (more common) CP2102N QFN-24	2017-09-20 20:48:11 +02:00
stepcraft_controller.pro	Change SiLabs CP2102 QFN-28 to (more common) CP2102N QFN-24	2017-09-20 20:48:11 +02:00
stepcraft_controller.sch	Change SiLabs CP2102 QFN-28 to (more common) CP2102N QFN-24	2017-09-20 20:48:11 +02:00

readme.md

Stepcraft GRBLizer

A GRBL compatible controller for use as a drop-in replacement for the SC100 USB standard controller deliverd with Stepcraft CNC machines. This Arduino Uno compatible controller is wired conforming the GRL v0.9+ standard. The controller can be used with the GRBL firmware and with EstlCAM.

Features

The PC is fully electrically isolated from the CNC machine (optional).
All inputs protected with clamping diodes and resistors.
Probe inputs have a 100 Ohm / 100nF low pass filter to suppress spurious triggering. (Filter values may be experimented with.)
3.5mm Jack for spindle / laser / hot-end control
3.5mm Jack input for 2 probes.
Serial interface fed out the back (TTL, not protected). For people in a hurry: CP2102 and isolator ICs can be left unpopulated.
Standard 6 pin ISP programming connector fed out the back (not protected).
Some juper block for IO-config

Alvast een leuk plaatje: