58 lines
3.2 KiB
Markdown
58 lines
3.2 KiB
Markdown
# LY Drawbot Tool
|
|
|
|
This is the ~~official~~ repository for the XY Plotter Tool Inkscape extension.
|
|
|
|
|
|
## Purpose
|
|
|
|
This extension work for the [DIY XY Plotter High Precision Drawbot](https://www.aliexpress.com/item/32917861259.html?spm=a2g0s.9042311.0.0.3d9f6c37xpT5iS)
|
|
|
|
* This is made for Inkscape 1.0 and above.
|
|
* This machin is using GRBL Control with GRBL Arduino Shield
|
|
|
|
## Installation
|
|
|
|
clone or downalod the zip of this git, Unzip the files directly into the Inkscape user extensions folder. Inkscape lists the location of your extensions folder under **Edit** > **Preferences** > **System**.
|
|
|
|
Restart Inkscape and you're done. if you are just changing the `.py` you dont have to restart inkscape, but any changes to the `.idx` will need an inkscape resatrt.
|
|
|
|
## Gcode Panel
|
|
|
|
> Inside `Inkscape > Extension > drawbot`
|
|
|
|
|
|
|
|
| Name | Definition | Default | Gcode Result |
|
|
|---|---| --- | --- |
|
|
| **Drawing On Command** | Gcode commande to lower down the Z-axis | `M3` | `M3 S1000` |
|
|
| **Drawing Off Command** | Gcode commande to upper the Z-axis | `M5` | `M5 S0` |
|
|
| **Pen Up Travel speed** | Travel speed with Pen Up | `3000` | `G1 F3000` |
|
|
| **Pen Down Travel speed** | Travel speed when drawing | `1500` | `G1 F1500` |
|
|
| **Pen Active Power** | command value to lower the pen | `1000` | `M3 S1000` |
|
|
| **Pen On Delay** | Delay after moving and before drawing | `0,1` | `G4 P0.1` |
|
|
| **Pen Off Delay** | Delay after drawing and before moving | `0,2` | `G4 P0.2` |
|
|
| **X Offset** | X-axis offset for plotter start position | `180` | All X coordinates shifted by offset value |
|
|
| **Y Offset** | Y-axis offset for plotter start position | `0` | All Y coordinates shifted by offset value |
|
|
| **Passes** | Number of Passes | | |
|
|
| **Pass Depth** | *relative to cnc milling* | `1,0` | |
|
|
| **Directory** | path directory to save your file in absolute | | |
|
|
| **Filename + numeric value** | the numeric value increment your file with the same name | `output.gcode` | |
|
|
| **All Units** | **Important** Be sure to setting everything up to the same unit inside Inkscape - Document Units, Inkscape Units and </br>this output units otherwise it mae some stranges things | `mm` | |
|
|
|
|
### Custom G-code Header and Footer
|
|
|
|
Add "header" and "footer" text files without extensions in your destination directory to add custom commands. Don't forget to add a new line at the end of these two files.
|
|
|
|
If no files are detected the default values are :
|
|
- Header : G90 ; Absolute positioningon the
|
|
- Header : G0 Z0 ; Display path inside GRBL Control
|
|
- Footer : G1 X0 Y0 ; Move to X0 Y0
|
|
|
|
## Credits
|
|
|
|
20251202 - thanks to [love-open-design.com](https://love-open-design.com/laboratoire/xy-plotter-tool-par-love-open-design/), which we forked and adapted. see [upstream](https://github.com/love-open-design/LY-Drawbot-Tool-by-LOD)
|
|
|
|
This inkscape extension is adapted from [J-Tech-Photonics-Laser-Tool](https://github.com/JTechPhotonics/J-Tech-Photonics-Laser-Tool) inkscape extension.
|
|
|
|
Thanks to [StuartB44](https://www.instructables.com/member/StuartB44/) for his work and infos on [Instructables](https://www.instructables.com/Fix-for-Image-Not-Showing-in-GRBLControl/) to display GCode inside GRBL Control
|