Sonny Jeon e455faaeef New G43.1/G49 gcodes. Not working yet!! ...

- Pushed this uncompleted code to merge a conflicting pull request.

- New G43.1 and G49 g-codes to be installed. The beginnings of it are
in place. These g-codes are intended to be used in conjunction with
probing and allow GUIs to set tool length offsets without Grbl needing
to store a tool table.

- G43.1 is defined as a dynamic tool length offset that is not stored
in memory. Rather, when commanded, these are applied to the work
coordinates until a reset or disabled by G49. This works much like G92.

2014-07-05 09:51:22 -06:00

6.7 KiB

Raw Blame History

View Raw