3c3382ff75
- New build info feature. Hidden command ‘$I’ will print the build info for your Grbl firmware. Users may also write an identifying message within it via ‘$I=‘ with up to 32 characters. (no more, or else it will break). - Adjusted the max number of startup lines to 3. Majority of people will only need one. - Fixed a compile error with spindle_control.c. A rogue #endif was causing problems.
95 lines
2.9 KiB
C
95 lines
2.9 KiB
C
/*
|
|
spindle_control.c - spindle control methods
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2012-2014 Sungeun K. Jeon
|
|
Copyright (c) 2009-2011 Simen Svale Skogsrud
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "settings.h"
|
|
#include "spindle_control.h"
|
|
#include "planner.h"
|
|
|
|
static uint8_t current_direction;
|
|
static uint16_t current_rpm;
|
|
|
|
|
|
void spindle_init()
|
|
{
|
|
current_direction = 0;
|
|
SPINDLE_DIRECTION_DDR |= (1<<SPINDLE_DIRECTION_BIT);
|
|
|
|
// On the Uno, spindle enable and PWM are shared. Other CPUs have seperate enable pin.
|
|
#ifdef VARIABLE_SPINDLE
|
|
SPINDLE_PWM_DDR |= (1<<SPINDLE_PWM_BIT);
|
|
#ifndef CPU_MAP_ATMEGA328P
|
|
SPINDLE_ENABLE_PORT |= (1<<SPINDLE_ENABLE_BIT);
|
|
#endif
|
|
#else
|
|
SPINDLE_ENABLE_PORT |= (1<<SPINDLE_ENABLE_BIT);
|
|
#endif
|
|
|
|
spindle_stop();
|
|
}
|
|
|
|
|
|
void spindle_stop()
|
|
{
|
|
// On the Uno, spindle enable and PWM are shared. Other CPUs have seperate enable pin.
|
|
#ifdef VARIABLE_SPINDLE
|
|
TCCRA_REGISTER &= ~(1<<COMB_BIT); // Disable PWM. Output voltage is zero.
|
|
#ifndef CPU_MAP_ATMEGA328P
|
|
SPINDLE_ENABLE_PORT &= ~(1<<SPINDLE_ENABLE_BIT);
|
|
#endif
|
|
#else
|
|
SPINDLE_ENABLE_PORT &= ~(1<<SPINDLE_ENABLE_BIT);
|
|
#endif
|
|
}
|
|
|
|
|
|
void spindle_run(int8_t direction, uint16_t rpm)
|
|
{
|
|
if ((direction != current_direction) || (rpm != current_rpm)) {
|
|
plan_synchronize(); // Empty planner buffer to ensure spindle is updated as programmed.
|
|
if (direction) {
|
|
if (direction > 0) {
|
|
SPINDLE_DIRECTION_PORT &= ~(1<<SPINDLE_DIRECTION_BIT);
|
|
} else {
|
|
SPINDLE_DIRECTION_PORT |= (1<<SPINDLE_DIRECTION_BIT);
|
|
}
|
|
|
|
#ifdef VARIABLE_SPINDLE
|
|
TCCRA_REGISTER = (1<<COMB_BIT) | (1<<WAVE1_REGISTER) | (1<<WAVE0_REGISTER);
|
|
TCCRB_REGISTER = (TCCRB_REGISTER & 0b11111000) | 0x02; // set to 1/8 Prescaler
|
|
if (rpm > SPINDLE_MAX_RPM) { rpm = SPINDLE_MAX_RPM; } // Prevent overflow.
|
|
uint8_t current_pwm = floor((((float) rpm / (float) SPINDLE_MAX_RPM ) * 255.0) + 0.5);
|
|
OCR_REGISTER = current_pwm;
|
|
|
|
#ifndef CPU_MAP_ATMEGA328P // On the Uno, spindle enable and PWM are shared.
|
|
SPINDLE_ENABLE_PORT |= (1<<SPINDLE_ENABLE_BIT);
|
|
#endif
|
|
#else
|
|
SPINDLE_ENABLE_PORT |= (1<<SPINDLE_ENABLE_BIT);
|
|
#endif
|
|
|
|
} else {
|
|
spindle_stop();
|
|
}
|
|
current_direction = direction;
|
|
current_rpm = rpm;
|
|
}
|
|
}
|