47cd40c8dc
- NEW! An active multi-axis step smoothing algorithm that automatically adjusts dependent on step frequency. This solves the long standing issue to aliasing when moving with multiple axes. Similar in scheme to Smoothieware, but more advanced in ensuring a more consistent CPU overhead throughout all frequencies while maintaining step exactness. - Switched from Timer2 to Timer0 for the Step Port Reset Interrupt. Mainly to free up hardware PWM pins. - Seperated the direction and step pin assignments, so we can now move them to seperate ports. This means that we can more easily support 4+ axes in the future. - Added a setting for inverting the limit pins, as so many users have request. Better late than never. - Bug fix related to EEPROM calls when in cycle. The EEPROM would kill the stepper motion. Now protocol mandates that the system be either in IDLE or ALARM to access or change any settings. - Bug fix related to resuming the cycle after a spindle or dwell command if auto start has been disabled. This fix is somewhat temporary or more of a patch. Doesn’t work with a straight call-response streaming protocol, but works fine with serial buffer pre-filling streaming that most clients use. - Renamed the pin_map.h to cpu_map.h to more accurately describe what the file is. - Pushed an auto start bug fix upon re-initialization. - Much more polishing to do!
345 lines
16 KiB
C
345 lines
16 KiB
C
/*
|
|
report.c - reporting and messaging methods
|
|
Part of Grbl
|
|
|
|
Copyright (c) 2012-2013 Sungeun K. Jeon
|
|
|
|
Grbl is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
Grbl is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*
|
|
This file functions as the primary feedback interface for Grbl. Any outgoing data, such
|
|
as the protocol status messages, feedback messages, and status reports, are stored here.
|
|
For the most part, these functions primarily are called from protocol.c methods. If a
|
|
different style feedback is desired (i.e. JSON), then a user can change these following
|
|
methods to accomodate their needs.
|
|
*/
|
|
|
|
#include <avr/pgmspace.h>
|
|
#include "report.h"
|
|
#include "print.h"
|
|
#include "settings.h"
|
|
#include "nuts_bolts.h"
|
|
#include "gcode.h"
|
|
#include "coolant_control.h"
|
|
|
|
|
|
// Handles the primary confirmation protocol response for streaming interfaces and human-feedback.
|
|
// For every incoming line, this method responds with an 'ok' for a successful command or an
|
|
// 'error:' to indicate some error event with the line or some critical system error during
|
|
// operation. Errors events can originate from the g-code parser, settings module, or asynchronously
|
|
// from a critical error, such as a triggered hard limit. Interface should always monitor for these
|
|
// responses.
|
|
// NOTE: In silent mode, all error codes are greater than zero.
|
|
// TODO: Install silent mode to return only numeric values, primarily for GUIs.
|
|
void report_status_message(uint8_t status_code)
|
|
{
|
|
if (status_code == 0) { // STATUS_OK
|
|
printPgmString(PSTR("ok\r\n"));
|
|
} else {
|
|
printPgmString(PSTR("error: "));
|
|
switch(status_code) {
|
|
case STATUS_BAD_NUMBER_FORMAT:
|
|
printPgmString(PSTR("Bad number format")); break;
|
|
case STATUS_EXPECTED_COMMAND_LETTER:
|
|
printPgmString(PSTR("Expected command letter")); break;
|
|
case STATUS_UNSUPPORTED_STATEMENT:
|
|
printPgmString(PSTR("Unsupported statement")); break;
|
|
case STATUS_ARC_RADIUS_ERROR:
|
|
printPgmString(PSTR("Invalid radius")); break;
|
|
case STATUS_MODAL_GROUP_VIOLATION:
|
|
printPgmString(PSTR("Modal group violation")); break;
|
|
case STATUS_INVALID_STATEMENT:
|
|
printPgmString(PSTR("Invalid statement")); break;
|
|
case STATUS_SETTING_DISABLED:
|
|
printPgmString(PSTR("Setting disabled")); break;
|
|
case STATUS_SETTING_VALUE_NEG:
|
|
printPgmString(PSTR("Value < 0.0")); break;
|
|
case STATUS_SETTING_STEP_PULSE_MIN:
|
|
printPgmString(PSTR("Value < 3 usec")); break;
|
|
case STATUS_SETTING_READ_FAIL:
|
|
printPgmString(PSTR("EEPROM read fail. Using defaults")); break;
|
|
case STATUS_IDLE_ERROR:
|
|
printPgmString(PSTR("Not idle")); break;
|
|
case STATUS_ALARM_LOCK:
|
|
printPgmString(PSTR("Alarm lock")); break;
|
|
case STATUS_SOFT_LIMIT_ERROR:
|
|
printPgmString(PSTR("Homing not enabled")); break;
|
|
case STATUS_OVERFLOW:
|
|
printPgmString(PSTR("Line overflow")); break;
|
|
}
|
|
printPgmString(PSTR("\r\n"));
|
|
}
|
|
}
|
|
|
|
// Prints alarm messages.
|
|
void report_alarm_message(int8_t alarm_code)
|
|
{
|
|
printPgmString(PSTR("ALARM: "));
|
|
switch (alarm_code) {
|
|
case ALARM_LIMIT_ERROR:
|
|
printPgmString(PSTR("Hard/soft limit")); break;
|
|
case ALARM_ABORT_CYCLE:
|
|
printPgmString(PSTR("Abort during cycle")); break;
|
|
}
|
|
printPgmString(PSTR(". MPos?\r\n"));
|
|
delay_ms(500); // Force delay to ensure message clears serial write buffer.
|
|
}
|
|
|
|
// Prints feedback messages. This serves as a centralized method to provide additional
|
|
// user feedback for things that are not of the status/alarm message protocol. These are
|
|
// messages such as setup warnings, switch toggling, and how to exit alarms.
|
|
// NOTE: For interfaces, messages are always placed within brackets. And if silent mode
|
|
// is installed, the message number codes are less than zero.
|
|
// TODO: Install silence feedback messages option in settings
|
|
void report_feedback_message(uint8_t message_code)
|
|
{
|
|
printPgmString(PSTR("["));
|
|
switch(message_code) {
|
|
case MESSAGE_CRITICAL_EVENT:
|
|
printPgmString(PSTR("Reset to continue")); break;
|
|
case MESSAGE_ALARM_LOCK:
|
|
printPgmString(PSTR("'$H'|'$X' to unlock")); break;
|
|
case MESSAGE_ALARM_UNLOCK:
|
|
printPgmString(PSTR("Caution: Unlocked")); break;
|
|
case MESSAGE_ENABLED:
|
|
printPgmString(PSTR("Enabled")); break;
|
|
case MESSAGE_DISABLED:
|
|
printPgmString(PSTR("Disabled")); break;
|
|
}
|
|
printPgmString(PSTR("]\r\n"));
|
|
}
|
|
|
|
|
|
// Welcome message
|
|
void report_init_message()
|
|
{
|
|
printPgmString(PSTR("\r\nGrbl " GRBL_VERSION " ("GRBL_VERSION_BUILD ") ['$' for help]\r\n"));
|
|
}
|
|
|
|
// Grbl help message
|
|
void report_grbl_help() {
|
|
printPgmString(PSTR("$$ (view Grbl settings)\r\n"
|
|
"$# (view # parameters)\r\n"
|
|
"$G (view parser state)\r\n"
|
|
"$N (view startup blocks)\r\n"
|
|
"$x=value (save Grbl setting)\r\n"
|
|
"$Nx=line (save startup block)\r\n"
|
|
"$C (check gcode mode)\r\n"
|
|
"$X (kill alarm lock)\r\n"
|
|
"$H (run homing cycle)\r\n"
|
|
"~ (cycle start)\r\n"
|
|
"! (feed hold)\r\n"
|
|
"? (current status)\r\n"
|
|
"ctrl-x (reset Grbl)\r\n"));
|
|
}
|
|
|
|
// Grbl global settings print out.
|
|
// NOTE: The numbering scheme here must correlate to storing in settings.c
|
|
void report_grbl_settings() {
|
|
printPgmString(PSTR("$0=")); printFloat(settings.steps_per_mm[X_AXIS]);
|
|
printPgmString(PSTR(" (x, step/mm)\r\n$1=")); printFloat(settings.steps_per_mm[Y_AXIS]);
|
|
printPgmString(PSTR(" (y, step/mm)\r\n$2=")); printFloat(settings.steps_per_mm[Z_AXIS]);
|
|
printPgmString(PSTR(" (z, step/mm)\r\n$3=")); printFloat(settings.max_rate[X_AXIS]);
|
|
printPgmString(PSTR(" (x max rate, mm/min)\r\n$4=")); printFloat(settings.max_rate[Y_AXIS]);
|
|
printPgmString(PSTR(" (y max rate, mm/min)\r\n$5=")); printFloat(settings.max_rate[Z_AXIS]);
|
|
printPgmString(PSTR(" (z max rate, mm/min)\r\n$6=")); printFloat(settings.acceleration[X_AXIS]/(60*60)); // Convert from mm/min^2 for human readability
|
|
printPgmString(PSTR(" (x accel, mm/sec^2)\r\n$7=")); printFloat(settings.acceleration[Y_AXIS]/(60*60)); // Convert from mm/min^2 for human readability
|
|
printPgmString(PSTR(" (y accel, mm/sec^2)\r\n$8=")); printFloat(settings.acceleration[Z_AXIS]/(60*60)); // Convert from mm/min^2 for human readability
|
|
printPgmString(PSTR(" (z accel, mm/sec^2)\r\n$9=")); printFloat(-settings.max_travel[X_AXIS]); // Grbl internally store this as negative.
|
|
printPgmString(PSTR(" (x max travel, mm)\r\n$10=")); printFloat(-settings.max_travel[Y_AXIS]); // Grbl internally store this as negative.
|
|
printPgmString(PSTR(" (y max travel, mm)\r\n$11=")); printFloat(-settings.max_travel[Z_AXIS]); // Grbl internally store this as negative.
|
|
printPgmString(PSTR(" (z max travel, mm)\r\n$12=")); printInteger(settings.pulse_microseconds);
|
|
printPgmString(PSTR(" (step pulse, usec)\r\n$13=")); printFloat(settings.default_feed_rate);
|
|
printPgmString(PSTR(" (default feed, mm/min)\r\n$14=")); printInteger(settings.step_invert_mask);
|
|
printPgmString(PSTR(" (step port invert mask, int:")); print_uint8_base2(settings.step_invert_mask);
|
|
printPgmString(PSTR(")\r\n$15=")); printInteger(settings.dir_invert_mask);
|
|
printPgmString(PSTR(" (dir port invert mask, int:")); print_uint8_base2(settings.dir_invert_mask);
|
|
printPgmString(PSTR(")\r\n$16=")); printInteger(settings.stepper_idle_lock_time);
|
|
printPgmString(PSTR(" (step idle delay, msec)\r\n$17=")); printFloat(settings.junction_deviation);
|
|
printPgmString(PSTR(" (junction deviation, mm)\r\n$18=")); printFloat(settings.arc_tolerance);
|
|
printPgmString(PSTR(" (arc tolerance, mm)\r\n$19=")); printInteger(settings.decimal_places);
|
|
printPgmString(PSTR(" (n-decimals, int)\r\n$20=")); printInteger(bit_istrue(settings.flags,BITFLAG_REPORT_INCHES));
|
|
printPgmString(PSTR(" (report inches, bool)\r\n$21=")); printInteger(bit_istrue(settings.flags,BITFLAG_AUTO_START));
|
|
printPgmString(PSTR(" (auto start, bool)\r\n$22=")); printInteger(bit_istrue(settings.flags,BITFLAG_INVERT_ST_ENABLE));
|
|
printPgmString(PSTR(" (invert step enable, bool)\r\n$23=")); printInteger(bit_istrue(settings.flags,BITFLAG_INVERT_LIMIT_PINS));
|
|
printPgmString(PSTR(" (invert limit pins, bool)\r\n$24=")); printInteger(bit_istrue(settings.flags,BITFLAG_SOFT_LIMIT_ENABLE));
|
|
printPgmString(PSTR(" (soft limits, bool)\r\n$25=")); printInteger(bit_istrue(settings.flags,BITFLAG_HARD_LIMIT_ENABLE));
|
|
printPgmString(PSTR(" (hard limits, bool)\r\n$26=")); printInteger(bit_istrue(settings.flags,BITFLAG_HOMING_ENABLE));
|
|
printPgmString(PSTR(" (homing cycle, bool)\r\n$27=")); printInteger(settings.homing_dir_mask);
|
|
printPgmString(PSTR(" (homing dir invert mask, int:")); print_uint8_base2(settings.homing_dir_mask);
|
|
printPgmString(PSTR(")\r\n$28=")); printFloat(settings.homing_feed_rate);
|
|
printPgmString(PSTR(" (homing feed, mm/min)\r\n$29=")); printFloat(settings.homing_seek_rate);
|
|
printPgmString(PSTR(" (homing seek, mm/min)\r\n$30=")); printInteger(settings.homing_debounce_delay);
|
|
printPgmString(PSTR(" (homing debounce, msec)\r\n$31=")); printFloat(settings.homing_pulloff);
|
|
printPgmString(PSTR(" (homing pull-off, mm)\r\n"));
|
|
}
|
|
|
|
|
|
// Prints gcode coordinate offset parameters
|
|
void report_gcode_parameters()
|
|
{
|
|
float coord_data[N_AXIS];
|
|
uint8_t coord_select, i;
|
|
for (coord_select = 0; coord_select <= SETTING_INDEX_NCOORD; coord_select++) {
|
|
if (!(settings_read_coord_data(coord_select,coord_data))) {
|
|
report_status_message(STATUS_SETTING_READ_FAIL);
|
|
return;
|
|
}
|
|
printPgmString(PSTR("[G"));
|
|
switch (coord_select) {
|
|
case 0: printPgmString(PSTR("54:")); break;
|
|
case 1: printPgmString(PSTR("55:")); break;
|
|
case 2: printPgmString(PSTR("56:")); break;
|
|
case 3: printPgmString(PSTR("57:")); break;
|
|
case 4: printPgmString(PSTR("58:")); break;
|
|
case 5: printPgmString(PSTR("59:")); break;
|
|
case 6: printPgmString(PSTR("28:")); break;
|
|
case 7: printPgmString(PSTR("30:")); break;
|
|
// case 8: printPgmString(PSTR("92:")); break; // G92.2, G92.3 not supported. Hence not stored.
|
|
}
|
|
for (i=0; i<N_AXIS; i++) {
|
|
if (bit_istrue(settings.flags,BITFLAG_REPORT_INCHES)) { printFloat(coord_data[i]*INCH_PER_MM); }
|
|
else { printFloat(coord_data[i]); }
|
|
if (i < (N_AXIS-1)) { printPgmString(PSTR(",")); }
|
|
else { printPgmString(PSTR("]\r\n")); }
|
|
}
|
|
}
|
|
printPgmString(PSTR("[G92:")); // Print G92,G92.1 which are not persistent in memory
|
|
for (i=0; i<N_AXIS; i++) {
|
|
if (bit_istrue(settings.flags,BITFLAG_REPORT_INCHES)) { printFloat(gc.coord_offset[i]*INCH_PER_MM); }
|
|
else { printFloat(gc.coord_offset[i]); }
|
|
if (i < (N_AXIS-1)) { printPgmString(PSTR(",")); }
|
|
else { printPgmString(PSTR("]\r\n")); }
|
|
}
|
|
}
|
|
|
|
|
|
// Print current gcode parser mode state
|
|
void report_gcode_modes()
|
|
{
|
|
switch (gc.motion_mode) {
|
|
case MOTION_MODE_SEEK : printPgmString(PSTR("[G0")); break;
|
|
case MOTION_MODE_LINEAR : printPgmString(PSTR("[G1")); break;
|
|
case MOTION_MODE_CW_ARC : printPgmString(PSTR("[G2")); break;
|
|
case MOTION_MODE_CCW_ARC : printPgmString(PSTR("[G3")); break;
|
|
case MOTION_MODE_CANCEL : printPgmString(PSTR("[G80")); break;
|
|
}
|
|
|
|
printPgmString(PSTR(" G"));
|
|
printInteger(gc.coord_select+54);
|
|
|
|
if (gc.plane_axis_0 == X_AXIS) {
|
|
if (gc.plane_axis_1 == Y_AXIS) { printPgmString(PSTR(" G17")); }
|
|
else { printPgmString(PSTR(" G18")); }
|
|
} else { printPgmString(PSTR(" G19")); }
|
|
|
|
if (gc.inches_mode) { printPgmString(PSTR(" G20")); }
|
|
else { printPgmString(PSTR(" G21")); }
|
|
|
|
if (gc.absolute_mode) { printPgmString(PSTR(" G90")); }
|
|
else { printPgmString(PSTR(" G91")); }
|
|
|
|
if (gc.inverse_feed_rate_mode) { printPgmString(PSTR(" G93")); }
|
|
else { printPgmString(PSTR(" G94")); }
|
|
|
|
switch (gc.program_flow) {
|
|
case PROGRAM_FLOW_RUNNING : printPgmString(PSTR(" M0")); break;
|
|
case PROGRAM_FLOW_PAUSED : printPgmString(PSTR(" M1")); break;
|
|
case PROGRAM_FLOW_COMPLETED : printPgmString(PSTR(" M2")); break;
|
|
}
|
|
|
|
switch (gc.spindle_direction) {
|
|
case 1 : printPgmString(PSTR(" M3")); break;
|
|
case -1 : printPgmString(PSTR(" M4")); break;
|
|
case 0 : printPgmString(PSTR(" M5")); break;
|
|
}
|
|
|
|
switch (gc.coolant_mode) {
|
|
case COOLANT_DISABLE : printPgmString(PSTR(" M9")); break;
|
|
case COOLANT_FLOOD_ENABLE : printPgmString(PSTR(" M8")); break;
|
|
#ifdef ENABLE_M7
|
|
case COOLANT_MIST_ENABLE : printPgmString(PSTR(" M7")); break;
|
|
#endif
|
|
}
|
|
|
|
printPgmString(PSTR(" T"));
|
|
printInteger(gc.tool);
|
|
|
|
printPgmString(PSTR(" F"));
|
|
if (gc.inches_mode) { printFloat(gc.feed_rate*INCH_PER_MM); }
|
|
else { printFloat(gc.feed_rate); }
|
|
|
|
printPgmString(PSTR("]\r\n"));
|
|
}
|
|
|
|
// Prints specified startup line
|
|
void report_startup_line(uint8_t n, char *line)
|
|
{
|
|
printPgmString(PSTR("$N")); printInteger(n);
|
|
printPgmString(PSTR("=")); printString(line);
|
|
printPgmString(PSTR("\r\n"));
|
|
}
|
|
|
|
// Prints real-time data. This function grabs a real-time snapshot of the stepper subprogram
|
|
// and the actual location of the CNC machine. Users may change the following function to their
|
|
// specific needs, but the desired real-time data report must be as short as possible. This is
|
|
// requires as it minimizes the computational overhead and allows grbl to keep running smoothly,
|
|
// especially during g-code programs with fast, short line segments and high frequency reports (5-20Hz).
|
|
void report_realtime_status()
|
|
{
|
|
// **Under construction** Bare-bones status report. Provides real-time machine position relative to
|
|
// the system power on location (0,0,0) and work coordinate position (G54 and G92 applied). Eventually
|
|
// to be added are distance to go on block, processed block id, and feed rate. Also a settings bitmask
|
|
// for a user to select the desired real-time data.
|
|
uint8_t i;
|
|
int32_t current_position[N_AXIS]; // Copy current state of the system position variable
|
|
memcpy(current_position,sys.position,sizeof(sys.position));
|
|
float print_position[N_AXIS];
|
|
|
|
// Report current machine state
|
|
switch (sys.state) {
|
|
case STATE_IDLE: printPgmString(PSTR("<Idle")); break;
|
|
case STATE_QUEUED: printPgmString(PSTR("<Queue")); break;
|
|
case STATE_CYCLE: printPgmString(PSTR("<Run")); break;
|
|
case STATE_HOLD: printPgmString(PSTR("<Hold")); break;
|
|
case STATE_HOMING: printPgmString(PSTR("<Home")); break;
|
|
case STATE_ALARM: printPgmString(PSTR("<Alarm")); break;
|
|
case STATE_CHECK_MODE: printPgmString(PSTR("<Check")); break;
|
|
}
|
|
|
|
// Report machine position
|
|
printPgmString(PSTR(",MPos:"));
|
|
for (i=0; i< N_AXIS; i++) {
|
|
print_position[i] = current_position[i]/settings.steps_per_mm[i];
|
|
if (bit_istrue(settings.flags,BITFLAG_REPORT_INCHES)) { print_position[i] *= INCH_PER_MM; }
|
|
printFloat(print_position[i]);
|
|
printPgmString(PSTR(","));
|
|
}
|
|
|
|
// Report work position
|
|
printPgmString(PSTR("WPos:"));
|
|
for (i=0; i< N_AXIS; i++) {
|
|
if (bit_istrue(settings.flags,BITFLAG_REPORT_INCHES)) {
|
|
print_position[i] -= (gc.coord_system[i]+gc.coord_offset[i])*INCH_PER_MM;
|
|
} else {
|
|
print_position[i] -= gc.coord_system[i]+gc.coord_offset[i];
|
|
}
|
|
printFloat(print_position[i]);
|
|
if (i < (N_AXIS-1)) { printPgmString(PSTR(",")); }
|
|
}
|
|
|
|
printPgmString(PSTR(">\r\n"));
|
|
}
|