Sonny Jeon b562845d9d Deceleration to zero speed improvements. Update defaults. ...

- A minor issue with deceleration ramps when close to zero velocity.
Should be virtually unnoticeable for most CNC systems, but fixed in
this push and accurate to physics.

- Updated some of the junction deviation defaults. Because the new
stepper algorithm can easily maximize a CNC machine’s capabilities or
simply go much faster, this means the speed in which it enters
junctions has to be a little more constrained. Meaning that, we have to
slow a little bit down more so that we don’t exceed the acceleration
limits of the stepper motors.

2013-12-07 20:08:24 -07:00

8.5 KiB

Raw Blame History

View Raw