138 lines
6.2 KiB
OpenSCAD
138 lines
6.2 KiB
OpenSCAD
// Camera side mount with modular inserts - LASER CUT VERSION
|
|
// Base plate with tripod hole + two camera mount inserts with notch/tab joints
|
|
// 24mm width faces front when assembled
|
|
|
|
// RENDER MODE - Change this to switch between views
|
|
render_mode = "2d_laser"; // Options: "assembly", "flat", or "2d_laser"
|
|
|
|
// ASSEMBLY ADJUSTMENT - Manual Z position offset for camera inserts
|
|
insert_z_offset = 15; // mm - adjust vertical position of camera inserts (positive = higher)
|
|
|
|
// Parameters - Camera hole spacing: rotated 90° CW
|
|
hole_spacing_x = 25; // mm (horizontal distance between hole centers)
|
|
hole_spacing_y = 24; // mm (vertical distance between hole centers)
|
|
bottom_hole_clearance = 3; // mm (clearance from base plate to bottom hole center when standing)
|
|
hole_edge_margin_x = 3; // mm (side margin)
|
|
hole_edge_margin_y = bottom_hole_clearance; // mm (bottom margin = bottom clearance)
|
|
mount_width = hole_spacing_x + 2 * hole_edge_margin_x; // 31mm total width
|
|
mount_height = hole_spacing_y + 2 * hole_edge_margin_y; // 30mm total height
|
|
material_thickness = 3; // mm (laser cut material thickness)
|
|
spacing = 35; // mm (gap between camera inserts)
|
|
hole_diameter = 3.2; // mm (M3 clearance hole for camera)
|
|
padding = 3; // mm padding on sides (top/bottom/right)
|
|
left_margin = 14; // mm left margin for tripod hole center (ensures >10mm edge clearance)
|
|
base_thickness = 2; // mm (base plate thickness)
|
|
tripod_hole_diameter = 6.35; // mm (1/4" standard tripod screw, radius=3.175mm)
|
|
|
|
// Notch parameters for joining - wider for better rigidity and alignment
|
|
notch_width = 12; // mm width of the notch/slot (wider for stability)
|
|
notch_depth = 3; // mm depth of the slot in base plate
|
|
tab_height = notch_depth; // Height of the tab on insert
|
|
|
|
// Total dimensions
|
|
mount_area_width = mount_width * 2 + spacing;
|
|
total_width = mount_area_width + left_margin + padding; // Left margin + right padding
|
|
// Height should fit standing inserts (mount_width when rotated) with padding
|
|
total_height = mount_width + 2 * padding; // Standing insert is mount_width tall in Y direction
|
|
|
|
// Base plate module with tripod hole and slots for inserts
|
|
module base_plate() {
|
|
difference() {
|
|
// Base rectangle
|
|
cube([total_width, total_height, base_thickness]);
|
|
|
|
// 1/4" tripod hole on left side (10mm clearance from edge)
|
|
translate([left_margin, total_height / 2, -0.5])
|
|
cylinder(h = base_thickness + 1, d = tripod_hole_diameter, $fn = 30);
|
|
|
|
// Slots for inserts - must match material_thickness when insert is rotated
|
|
// Centered on Y axis, sized to fit the 3mm thick insert tab perfectly
|
|
translate([left_margin + mount_width/2 - material_thickness/2, total_height/2 - notch_width/2, -0.5])
|
|
cube([material_thickness, notch_width, base_thickness + 1]);
|
|
|
|
translate([left_margin + mount_width + spacing + mount_width/2 - material_thickness/2, total_height/2 - notch_width/2, -0.5])
|
|
cube([material_thickness, notch_width, base_thickness + 1]);
|
|
}
|
|
}
|
|
|
|
// Camera mount insert module (with 4 M3 holes and bottom tab for slot)
|
|
module camera_mount_insert() {
|
|
difference() {
|
|
union() {
|
|
// Main insert body
|
|
cube([mount_width, mount_height, material_thickness]);
|
|
|
|
// Tab at bottom center for inserting into base slot
|
|
translate([mount_width/2 - notch_width/2, -tab_height, 0])
|
|
cube([notch_width, tab_height, material_thickness]);
|
|
}
|
|
|
|
// 4 holes for camera mounting - 25mm x 24mm spacing (rotated 90° CW)
|
|
// Bottom-left (3mm from base when standing)
|
|
translate([hole_edge_margin_x, hole_edge_margin_y, -0.5])
|
|
cylinder(h = material_thickness + 1, d = hole_diameter, $fn = 30);
|
|
|
|
// Bottom-right (25mm horizontal spacing)
|
|
translate([hole_edge_margin_x + hole_spacing_x, hole_edge_margin_y, -0.5])
|
|
cylinder(h = material_thickness + 1, d = hole_diameter, $fn = 30);
|
|
|
|
// Top-left (24mm vertical spacing from bottom)
|
|
translate([hole_edge_margin_x, hole_edge_margin_y + hole_spacing_y, -0.5])
|
|
cylinder(h = material_thickness + 1, d = hole_diameter, $fn = 30);
|
|
|
|
// Top-right
|
|
translate([hole_edge_margin_x + hole_spacing_x, hole_edge_margin_y + hole_spacing_y, -0.5])
|
|
cylinder(h = material_thickness + 1, d = hole_diameter, $fn = 30);
|
|
}
|
|
}
|
|
|
|
// Assembly module - shows complete setup with inserts standing vertically
|
|
module complete_assembly() {
|
|
// Base plate
|
|
base_plate();
|
|
|
|
// First camera mount insert (left) - sits flush on base plate, centered on Y
|
|
translate([left_margin + mount_width/2, total_height/2, base_thickness + insert_z_offset])
|
|
rotate([90, 0, 90])
|
|
translate([-mount_width/2, -mount_width/2, -material_thickness/2])
|
|
camera_mount_insert();
|
|
|
|
// Second camera mount insert (right) - sits flush on base plate, centered on Y
|
|
translate([left_margin + mount_width + spacing + mount_width/2, total_height/2, base_thickness + insert_z_offset])
|
|
rotate([90, 0, 90])
|
|
translate([-mount_width/2, -mount_width/2, -material_thickness/2])
|
|
camera_mount_insert();
|
|
}
|
|
|
|
// Render based on mode
|
|
if (render_mode == "assembly") {
|
|
// Assembly view - shows how parts fit together
|
|
complete_assembly();
|
|
} else if (render_mode == "flat") {
|
|
// Flat layout for laser cutting - all parts laid flat (3D view)
|
|
|
|
// Base plate
|
|
base_plate();
|
|
|
|
// First insert - laid flat
|
|
translate([total_width + 5, 0, 0])
|
|
camera_mount_insert();
|
|
|
|
// Second insert - laid flat
|
|
translate([total_width + 5, mount_height + tab_height + 5, 0])
|
|
camera_mount_insert();
|
|
} else if (render_mode == "2d_laser") {
|
|
// 2D projection for laser cutting - export as SVG/DXF
|
|
projection(cut = false) {
|
|
// Base plate
|
|
base_plate();
|
|
|
|
// First insert - laid flat
|
|
translate([total_width + 5, 0, 0])
|
|
camera_mount_insert();
|
|
|
|
// Second insert - laid flat
|
|
translate([total_width + 5, mount_height + tab_height + 5, 0])
|
|
camera_mount_insert();
|
|
}
|
|
} |