open source hardware DSOXLAN Ethernet module for Agilent/Keysight DSO-X 2000 and 3000 series oscilloscopes
Go to file
2024-05-20 10:52:35 +02:00
3Dmodels Replace RJ45 jack by Würth 7499010121A 2024-05-20 10:48:48 +02:00
DSOXLAN.pretty Replace RJ45 jack by Würth 7499010121A 2024-05-20 10:48:48 +02:00
gerbers Remove some useless silkscreen texts from mechanical parts 2024-05-20 10:52:35 +02:00
dsoxlan_kicad_pcb.png initial commit of kicad sources and pdf/jpg/png images/output 2014-12-18 21:47:14 +02:00
dsoxlan_kicad_schematic.pdf schematic in pdf format 2014-12-18 21:47:49 +02:00
dsoxlan_LAN-settings.jpg initial commit of kicad sources and pdf/jpg/png images/output 2014-12-18 21:47:14 +02:00
dsoxlan_pcb_2014-12-17.jpg initial commit of kicad sources and pdf/jpg/png images/output 2014-12-18 21:47:14 +02:00
dsoxlan_telnet.png initial commit of kicad sources and pdf/jpg/png images/output 2014-12-18 21:47:14 +02:00
dsoxlan.kicad_pcb Remove some useless silkscreen texts from mechanical parts 2024-05-20 10:52:35 +02:00
dsoxlan.kicad_prl DSC fixup 2024-05-18 17:31:14 +02:00
dsoxlan.kicad_pro Replace RJ45 jack by Würth 7499010121A 2024-05-20 10:48:48 +02:00
dsoxlan.kicad_sch Replace RJ45 jack by Würth 7499010121A 2024-05-20 10:48:48 +02:00
dsoxlan.kicad_sym Replace RJ45 jack by Würth 7499010121A 2024-05-20 10:48:48 +02:00
README.md Replace RJ45 jack by Würth 7499010121A 2024-05-20 10:48:48 +02:00

DSOXLAN

This is a simple Ethernet interface-card for Agilent/Keysight DSO-X 2000 and 3000 series oscilloscopes. The original Agilent/Keysight DSOXLAN module (about 326 euros + VAT as of December 2014) also includes VGA output, while this simple card provides only LAN.

Many thanks to "georges80" on the EEVBlog forum for the original schematic and PCB layout.

Components:

  • Ethernet jack, WÜRTH 7499010121A
  • 2pcs 220R 0805 resistor
  • 1pcs 10R 0805 resistor
  • 1pcs 100n 0805 capacitor

Files:

  • Kicad: schematic, PCB, project, cmp, netlist
  • non-standard footprints in /footprints: Ethernet magjack, 2x40-pin card-edge connector.

3D print components for case obtained from

https://www.eevblog.com/forum/projects/diy-dsoxlan-interface-for-keysight-oscilloscopes/msg4323214/#msg4323214

Apparently they have been authored by Jay_Diddy_B.

Released under the CERN OHL. See http://ohwr.org/cernohl

Links